Metadata-Version: 1.1
Name: xml2rfc
Version: 2.5.2
Summary: Xml2rfc generates RFCs and IETF drafts from document source in XML according to the dtd in RFC2629.
Home-page: https://tools.ietf.org/tools/xml2rfc/trac/
Author: Henrik Levkowetz
Author-email: henrik@levkowetz.com
License: Simplified BSD Licence
Download-URL: https://pypi.python.org/pypi/xml2rfc
Description: Introduction
        ============
        
        The IETF_ uses a specific format for the standards and other documents it
        publishes as RFCs_, and for the draft documents which are produced when
        developing documents for publications.  There exists a number of different
        tools to facilitate the formatting of drafts and RFCs according to the
        existing rules, and this tool, **xml2rfc**, is one of them.  It takes as input
        an xml file which contains the text and meta-information about author names
        etc., and transforms it into suitably formatted output.  The input xml file
        should follow the DTD given in RFC2629_ (or it's `inofficial successor`_).
        
        The current incarnation of **xml2rfc** provides output in the following
        formats: Paginated and unpaginated ascii text, html, nroff, and expanded xml.
        Only the paginated text format is currently (January 2013) accepable as draft
        submissions to the IETF.
        
        .. _IETF: https://www.ietf.org/
        .. _RFCs: https://www.rfc-editor.org/
        .. _RFC2629: https://tools.ietf.org/html/rfc2629
        .. _inofficial successor: https://tools.ietf.org/html/draft-mrose-writing-rfcs
        
        Installation
        ============
        
        System Install
        --------------
        
        To install a system-wide version of xml2rfc, download and unpack the `xml2rfc 
        distribution package`_, then cd into the resulting package directory and run::
        
            $ python setup.py install
        
        Alternatively, if you have the 'pip_' command ('Pip Installs Packages') installed,
        you can run pip to download and install the package::
        
            $ pip install xml2rfc
        
        .. _lxml:				http://lxml.de/
        .. _pip:				https://pypi.python.org/pypi/pip
        .. _xml2rfc distribution package:	https://pypi.python.org/pypi/pip
        .. _requests:				http://docs.python-requests.org/
        
        
        User Install
        ------------
        
        If you want to perform a local installation for a specific user,
        you have a couple of options.  You may use python's default location
        of user site-packages by specifying the flag ``--user``.  These locations are:
        
            * UNIX: $HOME/.local/lib/python<ver>/site-packages
            * OSX: $HOME/Library/Python/<ver>/lib/python/site-packages
            * Windows: %APPDATA%/Python/Python<ver>/site-packages
        
        You can additionally combine the flag ``--install-scripts`` with ``--user`` to
        specify a directory on your PATH to install the xml2rfc executable to.  For
        example, the following command::
        
            $ python setup.py install --user --install-scripts=$HOME/bin
        
        will install the xml2rfc library and data to your local site-packages
        directory, and an executable python script ``xml2rfc`` to $HOME/bin.
        
        Custom Install
        --------------
        
        The option ``--prefix`` allows you to specify the base path for all
        installation files.  The setup.py script will exit with an error if your
        PYTHONPATH is not correctly configured to contain the library path
        the script tries to install to.
        
        The command is used as follows::
        
            $ python setup.py install --prefix=<path>
        
        For further fine-tuning of the installation behavior, you can get a list
        of all available options by running::
        
            $ python setup.py install --help
        
        Usage
        =====
        
        xml2rfc accepts a single XML document as input and outputs to one or more conversion formats.
        
        **Basic Usage**: ``xml2rfc SOURCE [options] FORMATS...``
        
        **Options**
            The following parameters affect how xml2rfc behaves, however none are required.
            
            ===============  ======================= ==================================================
            Short            Long                    Description
            ===============  ======================= ==================================================
            ``-C``           ``--clear-cache``       purge the cache and exit
            ``-h``           ``--help``              show the help message and exit
            ``-n``           ``--no-dtd``            disable DTD validation step
            ``-N``           ``--no-network``        don't use the network to resolve references
            ``-q``           ``--quiet``             dont print anything
            ``-v``           ``--verbose``           print extra information
            ``-V``           ``--version``           display the version number and exit
        
            ``-b BASENAME``  ``--basename=BASENAME`` specify the base name for output files
            ``-c CACHE``     ``--cache=CACHE``       specify an alternate cache directory to write to
            ``-D DATE``      ``--date=DATE``         run as if todays date is DATE (format: yyyy-mm-dd)
            ``-d DTD``       ``--dtd=DTD``           specify an alternate dtd file
            ``-o FILENAME``  ``--out=FILENAME``      specify an output filename
            ===============  ======================= ==================================================
        
        **Formats**
            At least one but as many as all of the following output formats must
            be specified. The destination file will be created according to the
            argument given to --filename.  If no argument was given, it will
            create the file(s) "output.format".  If no format is specified, xml2rfc
            will default to paginated text (``--text``).
        
            ===========     ============================================================
            Command         Description
            ===========     ============================================================
            ``--raw``       outputs to a text file, unpaginated
            ``--text``      outputs to a text file with proper page breaks
            ``--nroff``     outputs to an nroff file
            ``--html``      outputs to an html file
            ``--exp``       outputs to an XML file with all references expanded
            ===========     ============================================================
        
        
        **Examples**
            | ``xml2rfc draft.xml``
            | ``xml2rfc draft.xml --dtd=alt.dtd --basename=draft-1.0 --text --nroff --html``
        
        Dependencies
        ============
        xml2rfc depends on the following packages:
        
        * lxml_ *(> 2.2.7)*
        * requests_ *(> 2.5.0)*
        
        
        Changelog
        =========
        
        
        Version 2.5.2 (07 Oct 2016)
        ------------------------------------------------
        
        
          This is a maintenance release.  It changes the RFC boilerplate for stream
          information to refer to RFC 7841 instead of RFC 5741, for RFCs dated
          July 2016 or later.
        
        
        
        
        
        
        
        Version 2.5.1 (19 Oct 2015)
        ------------------------------------------------
        
        
          This is a bugfix maintenance release.
        
          * Handled a situation where xml2rfc could crash if no source file name
            was available.
        
          From tonyh@att.com:
          * Modified some tests to match Jim's recent changes
        
          From ietf@augustcellars.com:
        
          * Add the valid versions of the text files for the unicode test file.
        
          * Fixes URIs which didn't add up.  This includes correcting code to deal
            with the difference in unicode strings on Python 2.7 vs Python 3.4.  Build
            the abstract when doing the indexing pass so that any references in it
            will be included both times through Add the start of a unicode test file.
            Fixes issue #290
        
          * Fixed an xref generation failure: Check to see if there is text, and do
            the right thing if there isn't.  The HTML version seems to be producing
            adequate results.  It does an <a> element around an empty piece of text.
            That is what was asked for.  Fixes issue #226.
        
          * Fixed an exception on out-of-date dates.  1.  We make it an error instead
            of a warning to have an incomplete and not this year date.  2.  We catch
            the type exception and continue.  Fixes issue #285
        
          * Replaced the space between the series info and the series value with a
            non-breaking space.  Changed any slashes in the series value so that there
            is a non-breaking zero width space following it.  If a URL is placed in
            the series value, then it is still not going to do correct breaking on
            this.  However this is not something that people should do.  Fixes issue
            #296
        
        
        
        
        
        
        
        Version 2.5.0 (18 May 2015)
        ------------------------------------------------
        
        
          This release uses different installation settings than previous releases,
          which should make installation under MS Window easier.  It also contains
          a few bugfixes.  For details, see below:
        
          * Applied patches from julian.reschke@gmx.de: Render <eref target='uri'> 
            without text as inline <uri>.  Fixes issue #234.
        
          * Changed setup.py to use the entry_points option instead of the scripts 
            option, in order to work better on mswin systems.  Fixes issue #291.
        
          * Made the reference sorting when using symrefs=yes and sortrefs=yes 
            case-insensitive by mapping the reference keys to lowercase.  This is 
            correct for ASCII keys but not necessarily for non-ASCII keys, depending on 
            locale.  Fixes issue #295 (for now).
        
          * Changed the path through reference resolution so that too old cached
            references will be updated in the same block where it was discovered that
            they were too old, rather than (erroneously) relying on this happening on
            a later attempt.
        
          * Set things up so that the processing instrunction dictionary isn't shared
            between the index-building and the document-building runs, which they were
            earlier, with the result that pi values could be different at the start of
            the document-building than they should have been.  Fixes issue #292.
        
        
        
        
        
        
        
        Version 2.4.12 (19 Apr 2015)
        ------------------------------------------------
        
        
          * Modified the nroff table output for PI subcompact=yes so as to produce 
            a list, rather than a paragraph of run-together list entries.  Fixes issue 
            #287.
        
          * Fixed a bug where a local variable would not always be set.
        
          * Fixed the bug in 2.4.10 where xml2rfc wouldn't fetch references.
        
          * Changed the cachetest so it exposes the bug found in 2.4.10 where 
            reference resulution would fail without even attempting network access.
        
        
        
        
        
        
        Version 2.4.11 (10 Apr 2015)
        ------------------------------------------------
        
        
          * Corrected when the deprecation message about using -f and --file is emitted.
        
          * Changed where warnings about missing cache entry and --no-network is
            emitted, in order to not emit warnings too early.
        
        
        
        
        
        
        Version 2.4.10 (08 Mar 2015)
        ------------------------------------------------
        
        
          * Catch bad arguments to the 'needlines' processing instruction.  Fixes 
            issue #282.
        
          * Make sure we don't ask textwrap to wrap text with within a width of 
            zero.  Fixes issue #277.
        
          * Reorganized the presentation of options, and corrected some of the help 
            strings.  Marked the -f, --filename options in use for output filename as 
            deprecated.
        
          * Added a switch --no-network to turn off all attempts to use the network 
            to resolve references.  When using this, processing will fail if the 
            references required by the source file aren't available in the file cache.  
            Also added code to refresh cached content if it's older than 14 days.  
            Modified some tests to suit.  This closes issues #275 and #284.
        
          * Fixed a bug where leading whitespace in title attributes weren't 
            handled properly.  Fixes issue #274.
        
          * Tweaked tox.ini to work around an issue with the py27 and py33 
            environments after upgrading to 2.7.8 and 3.3.5, respectively.
        
          * Added the attribute quote-title (default: true) to schema and writers, 
            and updated the tests accordingly.  Fixes issue #283.
        
        
        
        
        
        
        
        Version 2.4.9 (28 Feb 2015)
        ------------------------------------------------
        
        
          * Applied a patch from Martin Thompson to render the ToC with sublevel 
            indentation, instead of as a flat list, for html output, and updated the 
            html regression test masters to match.
        
          * Added a --no-headers switch, valid only for paginated text.  
            Specifying this omits the output of headers and footers, but retains form 
            feed and top-of-page line padding.
        
          * Consistently use utf-8 as output encoding.  As long as all content is 
            forced to be ascii, this doesn't change anything; if we permit non-ascii 
            content, this ensures it's utf-8 encoded.
        
          * Issue a warning for input containing tab characters, and expand to 8, 
            not 4 characters.  Fixes issue #276.
        
          * Added 'i.e.' as a non-sentence-ending string.  Added a test for some 
            abbreviations, including 'i.e.'.  Fixes issue #115
        
          * Changed the handling of rfcedstyle so as to include the Authors' 
            Addresses section in the TOC.  Fixes issue #273.
        
          * Added the ability to create unnumbered sections by using the attribute 
            numbered="no" on the section element, with the constraints specified in 
            draft-hoffman-xml2rfc-15.  Fixes issue #105.
        
          * In the front page top right-hand matter, don't keep the blank line 
            between authors and date that would otherwise be used for authors without 
            affiliation.  Fixes issue #272.
        
          * Rewrote the network access code to use the requests package instead of 
            urllib.  Added cache cleaning to the tox test actions.
        
        
        
        
        
        
        Version 2.4.8 (05 Jun 2014)
        ------------------------------------------------
        
        
          * From Tony Hansen <tonyh@att.com>:
            Added check of line_num+i against len(self.buf) before looking at
            self.buf[line_num+i].  Resolves issue #258.
        
          * Tweaked the word separator regex to handle words containing both '.' 
            and '-' internally more correctly. Fixes issue #256.
        
          * Now only emitting texttable word splitting warning once.
        
          * Changed the sort order of iref index items to not be case sensitive.  
            Fixes issue #255.
        
          * Generally, changed http: URLs to https:, for improved security.
        
        
        
        
        
        
        
        Version 2.4.7 (22 May 2014)
        ------------------------------------------------
        
        
          This release changes the reference resolution code to try 3 different
          network hosts when trying to find bibxml reference files on the net,
          instead of trying only xml.reference.org.  It now tries, in order::
        
             http://xml2rfc.ietf.org/
             http://xml2rfc.tools.ietf.org/
             http://xml.reference.org/
        
          The next release is expected to change this to using https: instead of http:,
          but that change requires both that the resources be available over https,
          and that there's been explicit testing of access over https, something which
          is absent from the current test suite.
        
        
        
        
        
        
        
        Version 2.4.6 (18 May 2014)
        ------------------------------------------------
        
        
          This release addresses the known bugs in xml2rfc which has hindered the
          RFC-Editor staff from consistently using xml2rfc v2 in production (and a
          number of other bugs, too).  There still remains a number of open issues,
          and these will be addressed in upcoming releases.  Here are some details
          about the issues fixed:
        
          * Tweaked the forward-slash part of the word-separator regex to handle IP 
            address prefix lenght indications better.  Related to issue #252.
            Thanks to Brian Carpenter for pointing this aspect out.
        
          * Changed the code so as to not blow up on empty section titles.  Fixes
            issue #245.
        
          * Updated the textwrapping word-separator regex to handle slash-separated
            words in a similar manner as hyphenated words, to avoid line-breaks that
            place the forward slash at the start of a line.  Fixes issue #252.
        
          * Updated the regex for end-of-sentence exceptions to treat a single
            alphabetic character followed by period as end-of-sentence, rather than
            considering it to be the abbreviation of a given name.  This fixes issue
            #251.
        
          * Updated the sorting to not sort the ref keys surrounded by squere
            brackest, instead sorting only the key strings.  Fixes issue #250.  
        
          * Added iref handling directly under section, and for figures, both of which
            were missing previously.  Fixes issue #249.  Also modified the format in
            which iref index page lists are emitted, to combine consecutive page
            numbers into range indications, and eliminate repeat mentions of the same
            page number.  Finally, changed things to avoid compressing the double
            space between index item and page list to a single space.  This should
            bring the iref output closer to that of xml2rfc v1.
        
          * Removed a static copy of the initial text-list-symbols PI, instead
            consulting the master PI dictionary every time, in order to catch changes
            in the text-list-symbols setting.  Fixes issue #246
        
          * Made a warning conditional on not building the indexes, to avoid duplicate
            error messages.  Fixes issue #242.
        
          * Provided the relevant counter when creating _RfcItem objects for Figures,
            Tables, numbered References, and Crefs, to make it possible to refer to
            them by xref elements with format='counter'.  Fixes issue #241.
        
          * Added wrapping and indentation of long Obsoletes: and Updates: list in the
            text formats.  Fixes issue #232.
        
          * Tweaked the top_rfc test to require proper line wrapping for long
            Obsoletes: lines; see issue #232.
        
          * We're now using a blank string for source when rendering a cref element
            with no source given, rather failing to concatenate None to a string.
            Fixes issue #225.
        
          * Rewrote the xml expansion code to use the same serialization mechanism
            under python 2.x and 3.x, and removed external references by replacing
            the doctype declaration during lxml serialization.
        
          * Fixed some code that didn't work correctly under python 3.3, by making
            sure to insert unicode strings instead of byte strings into unicode
            templates.
        
          * Fixed a bug where text was compared with an integer when handling the
            needLines PI.
        
          From Jim Schaad <ietf@augustcellars>:
        
          * Fixed ticket #186 based on diffs provided by Leif Johansson <leifj@mnt.se>:
            If the first parse of the XML tree generates a syntax error, then we now 
            produce a warning of that fact.  This is in part to help me track down what 
            is happening at odd intervolts on my system where it generates an error and 
            then has entity resolution problems.
        
          * Fixed the case of one reference section occurring with an eref.  In this
            case we need to emit the extra header in both locations.  Fixes ticket
            #222.
        
          * Fixed a bug where text following a cref is missing.
        
        
        
        
        
        
        
        Version 2.4.5 (17 Jan 2014)
        ------------------------------------------------
        
        
          Another bugfix release, with a majority of the contributions from Jim Schaad.
        
          * If there is not an RFC number then XXXX is used for the RFC number for to
            internal:/rfc.number - matches v1 behavior.  Fixes issue #114.
        
          * We now do a better (but not perfect) job of mking sure that section
            headings are not orphaned.  If you have two section headings in a row then
            the first may still be orphaned.  Fixes issue #166.
        
          * All known page breaking issues have been fixed.  Closes issue #172.
        
          * Fixed a number of places where the code has to be made to work with both
            Python 2.7 unicode and string whitespace, and Python 3.3. whitespace
            strings, which are always unicode.  Fixes issue #217.
        
          * Don't count formatting lines (which we can now tell) when computing 
            break hints.
        
          * Catch any syntax errors raised while we're looking for an RFC number 
            attribute on <rfc/>, so that we'll show all syntax errors found (during the 
            next parse) instead of just one and one.
        
          * Added tests which generate .txt from .nroff and compares that to the 
            xml2rfc-generated .txt (with some tweaks to handle different number of 
            starting blanklines.  Also corrected the number of initial blank lines 
            output for RFCs in the raw text writer.
        
          * Not all files on Windows systems have a common root.  This means that one
            cannot always get a relative path between to absolute path file names.
            Catch the error that occurs in these circumstances and just use the
            absolute path name.
        
          * Nested "format" style lists now include the level in the auto-generated
            counter value.  Fixes issue #218.
        
          * EREFs are now put into the references section for text based output.
            Fixes issue #133.
        
          * cref elements are not dealt with when inline is either yes or no for text
            files.  They are also now populated for html files as well.  Fixes issue
            #201.
        
        
        
        
        
        
        Version 2.4.4 (19 Dec 2013)
        ------------------------------------------------
        
        
          Another release with major contributions from Jim Schaad.  This release
          primarily addresses page-breaking issues, but also improves the reporting
          of syntax errors (if any) in the xml input.
        
          From Jim Schaad <ietf@augustcellars.com>:
        
          * We now do a better (but not perfect) job of mking sure that section
            headings are not orphaned.  If you have two section headings in a row then
            the first may still be orphaned.  Fixes issue #166.
        
          * Improved autobreaking, in a number of different places.  Fixes issue #172.
        
          * In all examples in the test suite, the .txt and .nroff output now have the
            same page breaks.
        
          * Eliminated the line-breaking of 'Section N' in text-tables which was
            introduced in 2.4.4.  Fixes ticket #217.
        
          * If there is not an RFC number then XXXX is used for the RFC number for to
            internal:/rfc.number - matches v1 behavior.  Fixes issue #114.
        
          From Henrik Levkowetz <henrik@levkowetz.com>:
        
          * Instead of previously only showing one single syntax error per invocation
            of xml2rfc, we're now showing all syntax errors found throughout the xml
            file at once.
        
          * Added tests which generate .txt from .nroff and compares that to the 
            xml2rfc-generated .txt (with some tweaks to handle different number of 
            starting blanklines.  Also corrected the number of initial blank lines 
            output for RFCs in the raw text writer.
        
        
        
        
        
        
        Version 2.4.4 (11 Dec 2013)
        ------------------------------------------------
        
        
          This is a bugfix release, with code fixes almost entirely from Jim Schaad.
        
          From Jim Schaad <ietf@augustcellars.com>:
        
          * Annotations now output more than just the first text field.  It now
            expands all of the child elements as part of the output. Fixes issue #183.
        
          * If the authors string is zero length, then we do not emit the comma
            separating the authors and the title. Fixes issue #137.
        
          * Each street line is now tagged as class vcardline so it is emitted on a
            separate line. Fixes issue #153.
        
          * Fixed a problem with unreferenced references warnings being emitted twice
            if there were two references sections.
        
          * Fixed some list indentation problems.  We now default to an indent of 3
            for hanging lists which is the same thing that v1 did.  We also use a
            value based on the bullet for format lists rather than using the 3 of a
            default hang indent - this also now matches v1 behavior.
        
          * Use width of bullet not default to 3*level+3
        
          * Fixed issue #147 - a hangingText without any text in the body now emits
            the hangingText. Fixes issue #117.
        
          * Set of fixes that deal with xref in documents.
        
          * Set of fixes that deal with references.
        
          * We now use the anchor rather than the generated bullet as the id of the
            reference element. Fixes issue #209.
        
          * The html did not have the same check for symrefs when sorting references
            that the text version did.  Copy it over so they both only sort if symrefs
            is yes. Fixes issue #210 and #170.
        
          * Anchors on t elements in a section were referencable, but no
            those in lists.  They are now referencable. Fixes issue #149.
        
          * We now generate a warning when we get a target in an xref that we have not
            created an indexable reference for.  This basically gives us an internal
            error check.
        
          * We now generate a warning when a reference is created that is not targeted
            by an xref in the document.
        
          * Fixed the centering algorithm so that the nroff and txt output files are
            more consistent.
        
          * Left shift artwork that is greater than 69 characters wide and steal space
            from the left margin. Fixes issue #129.
        
          *  & 194 which deal with how figures are layout
        
          * Fixed issue #132 - if the artwork has an alignment - then it overrides the
            figure's version for the purpose of the artwork itself. Fixes issue #151.
        
          * Suppres-title kills the title decoration (i.e. Figure 1:) which matches v1
            behavior. Fixes issue #213.
        
          * Convert all non-ASCII characters to entities when building the HTML body.
            We now are correct when we advertise it as being a us-ascii file.
        
          * Mixed two fixes back to the real source tree.
        
          * Rewrite of the basic low level code to use unicode strings in many places
            rather than convert the unicode characters into xml entity codes and try
            to use them.  Doing so cleans up much of the line wrapping problems.
        
          * URLs, when tagged to be not wrapped, now use different Unicode markers on
            the slashes and hyphens so that they will preferentially break on slashes
            rather than hyphens when a URL is too long to fit into a single line of
            text.
        
          * Tracker issues addressed: #192, #167, #168, #193, #200, #122, #139
        
          * Increase the amount of text in the INSTALL document to deal with more
            information on how to install for windows. Fixes issue #184.
        
          * Don't emit the references section and TOC entry if there are no references
            to be emitted. Fixes issue #205.
        
          * Centering code did not take into account the .in X nroff command.  Always
            use .in 0 for emission of raw text. Fixes issue #203.
        
          * The TCL code for deciding on table column widths has been moved into the
            new code. Fixes issue #173.
        
          * We now look for and do expansions for header cells just like normal
            cells. Fixes issue #131.
        
          * We now remove all entity references when doing an xml output
        
          * Fixed issue #146 - The code now allows for the assumption that the file
            name given is what it really is and then tries with the .xml appended if
            it is not found. Fixes issue #154.
        
          * Lots of errors added to tell about bad table layouts
        
          * allow make to run without pyflakes. Fixes issue #199.
        
          From Henrik Levkowetz <henrik@levkowetz.com>:
        
          * Modified the code that saves page-break hints when building the
            unpaginated text so that it doesn't overwrite existing hints used for
            artwork and tables (which should not be broken across pages if at all
            possible) with hints that indicate regular text paragraphs (which may be
            broken except if that creates a widow or orphan).  Fixes issue #179 by
            making the code do for artwork and tables what needLines used to do,
            without needing the manual needLines hint.
        
        
        
        
        
        
        Version 2.4.3 (17 Nov 2013)
        ------------------------------------------------
        
        
          This release adds compatibility with Python 3.3; the test suite has been
          run for Python 2.6, 2.7 and 3.3 using the 'tox' tool.
        
          This release also includes a large number of bugfixes, from people working
          at improving xml2rfc during the IETF-88 code sprint.
        
          Details:
        
          From Tony Hansen <tony@att.com>:
        
          * Eliminated spurious dots before author names on page 1.  Fixes issue #189.
        
          * Fixed the style of nested letter-style lists.  Fixes issue #127
        
          * Added a handling for empty <?rfc?> PIs within references.  Fixes issue #181.
        
          * Removed trailing whitespace from reference title, organization.  Fixes
            issue #171.
        
          * Added support v1 list formats %o, %x, and %X.  Fixes issue #204.
        
          * Fixed a bad html selector which had a trailing '3'.  Fixes issue #197.
        
          From Jim Schaad <ietf@augustcellars>:
        
          * Removed leading zeros on dates.  Fixes issue #206.
        
          * Fixed a crash when a new page had just been created, and it was totally
            empty.  It is unknown if this can occur someplace other than for the last
            page, but it should have check in other locations to look for that.  In
            addition we needed a change to figure out that we had already emitted a
            header for the page we are not going to use any longer and delete it.  Fixes
            issue #187.
        
          * Handled the missing \& to escape a period at the beginning of a line.  If we
            do a raw emission (i.e. inside of a figure) then we need to go back over the
            lines we just put into the buffer and check to see if any of them have
            leading periods and quote them.  Fixes issue #191.
        
          * Removed extraneous .ce 0 and blank lines in the nroff.  Since it was using
            the paging formatter in the process of building the nroff output, it kept
            all of the blank lines at the end of each page and emitted them.  There is
            no check in the nroff page_break function which removes any empty lines at
            the end of the array prior to emitting the ".bp" directive (or not emitting
            it if it is the last thing in the file.  Fixes issue #180.
        
          * Now correctly picks up the day if a day is provided and uses the current day
            for a draft if the month and year are current.  We now allow for both the
            full name of the month and the abbreviated name of the month to be used,
            however there may be some interesting questions to look at if November is
            not in the current locale.  Fixes issue #195.
        
          * Fixed the text-list-symbols PI to work at all levels.  The list should
            inherit style from the nearest parent that has one.  Fixes issue #126.
        
          From Elwyn Davies <elwynd@dial.pipex.com>: 
        
          * Don't emit '\%' before 'Section' for xrefs in the nroff writer.  Fixes
            issue #169.
        
          From Henrik Levkowetz <henrik@levkowetz.com>:
        
          * Modified the iref index output to use consistent sorting for items
            and subitems.
        
          * Removed the restriction to python 2.x from setup.py
        
          * Ported xml2rfc to python 3.3 while maintaining compatibility with 2.6 
            and 2.7.
        
          * Added support for tox testing covering python versions 2.6, 2.7 and 3.3
        
        
        
        
        
        
        
        Version 2.4.2 (26 May 2013)
        ------------------------------------------------
        
        
          This release fixes all major and critical issues registered in the issue
          tracker as of 26 May 2013.  Details:
        
          * Applied a patch from ht@inf.ed.ac.uk to sort references (when PI
            sortrefs==yes), and added code to insert a link target if the reference
            has a 'target' attribute. Fixes issue #175.
        
          * Added pre-installation requirements to the INSTALL file.  Added code to
            scripts/xml2rfc in order to avoid problems if that file is renamed to
            scripts/xml2rfc.py.  This fixes issue #152.
        
          * Added a setup requirement for python <3.0, as things don't currently
            work if trying to run setup.py or xml2rfc with python 3.X.
        
          * Added special cases to avoid adding double spaces after many common
            abbreviations.  Refined the sentence-end double-space fixup further, to
            look at whether what follows looks like the start of a new sentence.
            This fixes issue #115.  
        
          * Moved the get_initials() function to the BaseRfcWriter, as it now needs
            to look at a PI.  Added code to return one initial only, or multiple,
            depending on the PI 'multiple-initials' setting.  Fixes issue #138 (for
            now).  It is possible that this resolution is too simpleminded, and a
            cleaner way is needed to differentiate the handling of initials in the
            current document versus initials in references.
        
          * Added new undocumented PI multiple-initials to control whether multiple
            initials will be shown for an author, or not.  The default is 'no',
            matching the xml2rfc v1.x behaviour.
        
          * Fixed the code which determines when an author affiliation doesn't need
            to be listed again in the front page author list, and removes the
            redundant affiliation (the old code would remove the *first* matching
            organization, rather than the immediately preceeding organization name).
            Also fixed a buggy test of when an organization element is present.
            Fixes issue #135.
        
          * Made appearance of 'Authors Address' (etc.) in ToC dependent on PI
            'rfcedstyle' == 'yes'.  Fixes issue #125.
        
          * Updated write_text() to handle long bullets that need to be wrapped
            across lines better.  Fixes issue #124.
        
          * Fixed two other cases of missing blank lines when PI 'compact' is 'no'.
            Fixes issue #82 (some more).
        
          * Disabled the iprnotified IP.  See issue #123; closes #123.
        
          * When protecting http: URLs from line-breaking in nroff output, place the
            \% outside enclosing parentheses, if any.  Fixes issue #120.
        
          * Added a warning for incomplete and out-of-date <date/> elements.  Fixed
            an issue with changeset [792].
        
          * Issue a warning when the source file isn't for an RFC, but doesn't have
            a docName attribute in the <rfc/> element.
        
          * Fixed the use of separating lines in table drawing, to match v1 for text
            and nroff output.  (There is no specification for the meaining of the
            different styles though...).  Fixes issue #113.  Note that additional
            style definitions are needed to get the correct results for the html
            output.
        
          * Refactored and re-wrote the paginated text writer and the nroff writer
            in order to generate a ToC in nroff by re-using the fairly complex
            post-rendering code which inserts the ToC (and iref entries) in the
            paginated text writer.  As a side effect, the page-breaking calculations
            for the nroff writer becomes the same as for the paginated writer.
            Re-factored the line and page-break emitting code to be cleaner and more
            readable.  Changed the code to not start inserting a ToC too close to
            the end of a page (currently hardcoded to require at least 10 lines),
            otherwise skip to a new page.  Fixes issue #109.
        
          * Changed the author list in first-page header to show a blank line if no
            organization has been given.  Fixes issue #108.
        
          * Changed the wrapping of nroff output to match text output closely, in
            order to minimize insertion of .bp in the middle of a line.  Fixes issue
            #150 (mostly -- line breaks on hyphens may still cause .bp to be emitted
            in the middle of a line in very rare cases).
        
          * Changed nroff output for long titles (which will wrap) so that the
            wrapped title text will be indented appropriately.  Fixes issue #128.
        
          * Changed the handling of special characters (nbsp, nbhy) so as to emit
            the proper non-breaking escapes for nroff.  Fixes issue #121.
        
          * Changed start-of-line nroff escape handling, see issue #118.
        
          * Changed the generation of xref text to use the same numeric indexes as
            in the references section when symrefs='no'.  Don't start numbering over
            again when starting a new references section (i.e., when moving from
            normative to informative).  Don't re-sort numeric references
            alphabetically; they are already sorted numerically.  Fixes issue #107.
        
          * Changed os.linesep to '<NL>' when writing lines to text files.  The
            library takes care of doing the right thing on different platforms;
            writing os.linesep on the other hand will result in the file containing
            '<CR><CR><NL>', which is wrong.  Fixes issue #141.
        
          * Changed handling of include PIs to replace the PI instead of just
            appending the included tree.  Updated a test file to match updated test
            case.  Fixes issue #136.
        
        
        
        
        
        
        Version 2.4.1 (13 Feb 2013)
        ------------------------------------------------
        
        
          * Fixed a problem with very long hangindent bullet text followed by
            <vspace/>, which could make xml2rfc abort with a traceback for
            certain inputs.
        
          * Fixed a mismatched argument count for string formatting which could
            make xml2rfc abort with a traceback for certain inputs.
        
        
        
        
        
        
        
        Version 2.4.0 (27 Jan 2013)
        ------------------------------------------------
        
        
          With this release, all issues against the 2.x series of xml2rfc has been
          resolved.  Without doubt there will be new issues in the issue tracker,
          but the current clean slate is nice to have.
        
          For full details on all tickets, there's always the issue tracker:
          https://trac.tools.ietf.org/tools/xml2rfc/trac/report/
        
          An extract from the commit log is available below:
        
          * In some cases, the error messages when validating an xml document are 
            correct, but too obscure.  If a required element is absent, the error 
            message could say for instance 'Element references content does not follow 
            the DTD, expecting (reference)+, got ', which is correct -- the DTD 
            validator  got nothing, when it required something, so it says 'got ', with 
            nothing after 'got'.  But for a regular user, we now add on 'nothing.' to 
            make things clearer.  Fixes issue #102.
        
          * It seems there could be a bug in separate invocation of 
            lxml.etree.DTD.validate(tree) after parsing, compared to doing parsing with 
            dtd_validation=True.  The former fails in a case when it shouldn't, while 
            the latter succeeds in validating a valid document.  Declaring validation 
            as successful if the dtd.error_log is empty, even if validation returned 
            False.  This resolves issue #103.
        
          * Factored out the code which gets an author's initials from the xml 
            author element, and made the get_initials() utility function return 
            initials fixed up with trailing spaces, if missing.  The current code does 
            not mangle initials by removing any initials but the first one.  Fixes 
            issue #63, closes issue #10.
        
        
          * Added code to avoid breaking URLs in boilerplate across lines.  Fixes 
            issue #78.
          * Added PI defaults for 'figurecount' and 'tablecount' (not listed in the 
            xml2rfc readme...)  Also removed coupling between explicitly set 
            rfcedstyle, compact, and subcompact settings, to follow v1 practice.
        
          * Refactored the PI defaults to appear all in the same place, rather than 
            spread out throughout the code.
        
        
          * Updated draw_table to insert blank rows when PI compact is 'no'. Fixes 
            issue #82.
        
          * Added tests and special handling for the case when a hanging type list 
            has less space left on the first line, after the bullet, than what's needed 
            for the first following word.  In that case, start the list text on the 
            following line.  Fixes issue #85.
        
          * Modified the page-breaking code to better keep section titles together 
            with the section text, and keep figure preamble, figure, postamble and 
            caption together.  Updated tests.  Fixes issue #100.
        
          * Added handling of tocdepth to the html writer.  Fixes issue #101.
        
          * Modified how the --base switch to the xml2rfc script works, to make it 
            easier to generate multiple output formats and place them all in the same 
            target directory.  Also changed the default extensions for two output 
            formats (.raw.txt and .exp.xml).
        
          * Tweaked the html template to not permit crazy wide pages.
        
          * Rewrote parts of the parsing in order to get hold of the number 
            attribute of the <rfc/> tag before the full parsing is done, in order to be 
            able to later resolve the &rfc.number; entity (which, based on how 
            convoluted it is to get that right, I'd like to deprecate.)  Fixes issue 
            #86.
        
          * Numerous small fixes to indentation and wrapping of references.  Avoid 
            wrapping URLs in references if possible.  Avoid wrapping 'Section 3.14.' if 
            possible.  Indent more like xml2rfc v1.
        
          * Added reduction of doublespaces in regular text, except when they might 
            be at the end of a sentence.  Xml2rfc v1 would do this, v2 didn't till now.
        
          * Generalized the _format_counter() method to consistently handle list 
            counter field-widths internally, and made it adjust the field-width to the 
            max counter width based on the list length and counter type.  Fixes an v1 
            to -v2 incompatibility for numbered lists with 10 items or more, and other 
            similar cases.
        
          * Added generic base conversion code, and used that to generate list 
            letters which will work for lists with more than 26 items.
        
          * Reworked code to render roman numerals in lists, to place whitespace 
            correctly in justification field.  Fixes issue #94.
        
          * Added consensus vs. no-consensus options for IAB RFCs' Status of This 
            Memo section.  Fixes issue #88.
        
          * Made <t/> elements with an anchor attribute generate html with an <a 
            name='...'/> elemnt, for linking.  Closes issue #67.
        
          * Applied boilerplate URL-splitting prevention only in the raw writer 
            where later do paragraph line-wrapping, instead of generically.  Fixes 
            issue #62.
        
          * Now permitting all versions of lxml >= 2.2.8, but notice that there may 
            be missing build dependencies for lxml 3.x which may cause installation of 
            lxml to fail.  (That's an lxml issue, rather than an xml2rfc issue, 
            though...)  This fixes issue #99.
        
        
        
        
        
        
        
        Version 2.3.11.3 (18 Jan 2013)
        ------------------------------------------------
        
        
          * Tweaked the install_required setting in setup.py to not pull down lxml 3.x
            (as it's not been tested with xml2rfc) and bumped the version.
        
        
        
        
        
        
        
        Version 2.3.11 (18 Jan 2013)
        ------------------------------------------------
        
        
          This release fixes all outstanding major bugs, details below.
          The issue tracker is at https://tools.ietf.org/tools/xml2rfc/trac/.
        
          * Updated the nroff writer to do backslash escaping on source text, to 
            avoid escaping nroff control characters.  Fixes issue #77.
        
          * Added a modified xref writer to the nroff output writer, in order to 
            handle xref targets which should not be broken across lines.  This, 
            together with changeset [688], fixes issue #80.
        
          * Added text to the section test case to trigger the second part of issue 
            #79.  It turns out that the changes in [688] fixed this, too; this closes 
            issue #79.
        
          * Tweaked the nroff generation to not break on hyphens, in order to avoid 
            hyphenated words ending up with embedded spaces: 'pre-processing' becoming 
            'pre- processing' if 'pre-' occurred at the end of an nroff text line.  
            Also tweaked the line-width used in line-breaking to have matching 
            line-breaks between .txt and .nroff output (with exception for lines ending 
            in hyphens).
        
          * Tweaked roman number list counter to output roman numbers in a field 5 
            spaces wide, instead of having varied widths.  This is different from 
            version 1, so may have to be reverted, depending on how people react.
        
          * Added a warning for too long lines in figures and tables.  No 
            outdenting for now; I'd like to consult some about that. Fixes issue #76.
        
          * Updated tests showing that all list format specifiers mentioned in 
            issue #70 now works.  Closes isssue #70.
        
          * Changed spanx emphasis back to _this_ instead of -this-, matching the v1 
            behaviour.  Addresses issue #70.
        
          * Make <vspace/> in a hangindent list reset the indentation to the 
            hang-indent, even if the bullet text is longer than the hang-indent.  
            Addresses issue #70.
        
          * Refined the page-breaking to not insert an extra page break for artwork
            that won't fit on a page anyway.
        
          * Refined the page-breaking to avoid breaking artwork and tables across 
            pages, if possible.
        
          * Fixed a problem with centering of titles and labels.  Fixes issue #73.
        
          * Changed the leading and trailing whitespace lines of a page to better 
            match legacy output.  Fixed the autobreaking algorithm to correctly avoid 
            orphans and widows; fixes issue #72.  Removed an extra blank line at the 
            top of the page following an early page break to avoid orphan or widow.
        
          * Tweaked the generation of ToC dot-lines and page numbers to better 
            match legacy xml2rfc.  Fixed a bug in the generation of xref text where 
            trailing whitespace could cause double spaces.  Tweaked the output format 
            to produce the correct number of leading blank lines on the first page of a 
            document.
        
          * Modified the handling of figure titles, so that given titles will be 
            written also without anchor or figure counting.  Fixes issue #75.
        
          * Tweaked the html writer to have a buffer interface that provides a 
            self.buf similar to the other writers, for test purposes.
        
          * Reworked the WriterElementTest suite to test all the output formats, 
            not only paginated text.
        
          * Added a note about /usr/local/bin permissions.  This closes issue #65.
        
          * Added files describing possible install methods (INSTALL), and possible 
            build commands (Makefile).
        
          * The syntax that was used to specify the version of the lxml dependency 
            ('>=') is not supported in python distutil setup.py files, and caused setup 
            to try to find an lxml version greater than =2.2.8, which couldn't succeed. 
            Fixed to say '>2.2.7' instead.  This was probably the cause of always 
            reinstalling lxml even when it was present.
        
          * Updated README.rst to cover the new --date option, and tweaked it a bit.
        
          * Added some files to provide an enhanced source distribution package.
        
          * Updated setup.py with maintainer and licence information.
        
        
        
        
        
        
        Version 2.3.10 (03 Jan 2013)
        ------------------------------------------------
        
        
          * Changed the output text for Internet-Draft references to omit the 
            series name, but add (work in progress).  Updated the test case to match 
            draft revision number.
        
          * Updated all the rfc editor boilerplate in valid test facits to match the 
            correct outcome (which is also what the code actually produces).
        
          * Changed the diff test error message so that the valid text is output as 
            the original, not as the changed text of a diff.
        
          * Corrected test cases to match correct expiry using 185 days instead of 
            183 days from document date.
        
          * Added missing attributes to the XmlRfcError Exception subclass, 
            necessary in order to make it resemble lxml's error class and provide 
            consistent error messages to the user whether they come from lxml or our 
            own code.
        
          * Added a licence file, indicating the licencing used by the IETF for the 
            xml2rfc code.
        
          * Fixed up the xml2rfc cli script to provide better help texts by telling 
            the option parser the appropriate option variable names.
        
          * Fixed up the help text formatting by explicitly providing an appropriate
            help text formatter to the option parser.  
        
          * Added an option (--date=DATE)to provide the document date on the command
            line.
        
          * Added an option (--no-dtd) to disable the DTD validation step.  
        
          * Added code to catch additional exceptions and provide appropriate user
            information, instead of an exception traceback.
        
        
        
        
        
Platform: UNKNOWN
Classifier: Environment :: Console
Classifier: Operating System :: MacOS :: MacOS X
Classifier: Operating System :: Microsoft :: Windows
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Topic :: Text Processing
Classifier: Topic :: Text Processing :: Markup :: XML
Classifier: License :: OSI Approved :: BSD License
