WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,  Unsigned32, Gauge32,
        OBJECT-IDENTITY, enterprises,
        IpAddress                       FROM SNMPv2-SMI
        watchguard                      FROM WATCHGUARD-SMI;

    wgIpsecEndpointPairModule MODULE-IDENTITY
        LAST-UPDATED "200701251200Z"
        ORGANIZATION "WatchGuard Technologies, Inc."
        CONTACT-INFO
                   "  WatchGuard Technologies, Inc.
                   
                      505 Fifth Avenue South
                      Suite 500
                      Seattle, WA 98104
                      United States

                      +1.206.613.6600 "

        DESCRIPTION
            "The MIB module describes generic Ipsec Endpoint Pair information
            of WatchGuard system.  Mainly, the information 
            obtained from this MIB is used to constructed topological
            view of IPSec security gateways that are connected by
            IPSec tunnels. 
               
            An IPSec Endpoint Pair is a pair of security gateways that
            are connected with 0 or more IPSec SA's in tunnel mode.  
            It contains information of aggregated information 
            of tunnel mode SA's between two security gateways.

            An IPSec Endpoint Pair is identified by a pair of IP addresses.
            Therefore, if an IPSec security gateway X has 2 external
            IP addresses while IPsec secruity gateway Y has 3 external
            IP addresses, there are potentially 6 IPsec Endpoint Pairs
            between X and Y."


        REVISION      "200701251200Z"
        DESCRIPTION
            "Initial revision."
        ::= { watchguard 5 }


    wgIpsecEndpointPairMIB OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all IPSec tunnel
             branches."
        ::= { wgIpsecEndpointPairModule 1 }

    wgIpsecEndpointPair OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all IPSec
            tunnel information."
        ::= { wgIpsecEndpointPairMIB 1 }

    wgIpsecEndpointPairStatistics OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all objects which
            are global counters for IPSec tunnels."
        ::= { wgIpsecEndpointPairMIB 2 }


    wgIpsecEndpointPairNum OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of entries in the wgIpsecEndpointPairTable. "
        ::= { wgIpsecEndpointPair 1 }

    wgIpsecEndpointPairTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF WGIpsecEndpointPairEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This is the connection table describing all current
            IPSec tunnels exist on this entity."
        ::= { wgIpsecEndpointPair 2 }


    wgIpsecEndpointPairEntry OBJECT-TYPE
        SYNTAX      WGIpsecEndpointPairEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry (conceptual row) containing the information on a
            IPSec tunnel between two IPSec security gateways."
        INDEX{ wgIpsecEndpointPairIndex }
        ::= { wgIpsecEndpointPairTable 1 }

    WGIpsecEndpointPairEntry ::= SEQUENCE {

        wgIpsecEndpointPairIndex                 Integer32,

        wgIpsecEndpointPairLocalAddr             IpAddress,
        wgIpsecEndpointPairPeerAddr              IpAddress,


        wgIpsecEndpointPairInSAs                 Unsigned32,
        wgIpsecEndpointPairOutSAs                Unsigned32,
        wgIpsecEndpointPairInAccKbytes           Counter32,
        wgIpsecEndpointPairOutAccKbytes          Counter32,
        wgIpsecEndpointPairInPackets             Counter32,
        wgIpsecEndpointPairOutPackets            Counter32,
        wgIpsecEndpointPairDecryptErrors         Counter32,
        wgIpsecEndpointPairAuthErrors            Counter32,
        wgIpsecEndpointPairReplayErrors          Counter32,
        wgIpsecEndpointPairPolicyErrors          Counter32,
        wgIpsecEndpointPairPadErrors             Counter32,
        wgIpsecEndpointPairOtherReceiveErrors    Counter32,
        wgIpsecEndpointPairSendErrors            Counter32

    }

    wgIpsecEndpointPairIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
               "The running index of this IPSec endpoint pair."
        ::= { wgIpsecEndpointPairEntry 1 }

    wgIpsecEndpointPairLocalAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The local IP address of the current IPSec ednpoint pair."
        ::= { wgIpsecEndpointPairEntry 2 }

    wgIpsecEndpointPairPeerAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The remote IP address of the current IPSec endpoint pair."
        ::= { wgIpsecEndpointPairEntry 3 }


    wgIpsecEndpointPairInSAs OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of inbound IPSEC SA's within this
             IPSec endpoint pair.If IKE rekeys and no data 
             stream to activate new SA, the SA statistics       
             may be include the old SA, then the total number 
             is the double of the active SA"
        ::= { wgIpsecEndpointPairEntry 4 }

    wgIpsecEndpointPairOutSAs OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of outbound IPSEC SA's within this
             IPSec endpoint pair.If IKE rekeys and no data 
             stream to activate new SA, the SA statistics       
             may be include the old SA, then the total number 
             is the double of the active SA"
        ::= { wgIpsecEndpointPairEntry 5 }

    wgIpsecEndpointPairInAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total inbound traffic in Kbytes since the establish of
             this connection."
        ::= { wgIpsecEndpointPairEntry 6 }

    wgIpsecEndpointPairOutAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total outound traffic in Kbytes since the establish of
            this connection."
        ::= { wgIpsecEndpointPairEntry 7 }

    wgIpsecEndpointPairInPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of inbound packets since the establish of
            this connection."
        ::= { wgIpsecEndpointPairEntry 8 }

    wgIpsecEndpointPairOutPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of outound packets since the establish of
            this connection."
        ::= { wgIpsecEndpointPairEntry 9 }

    wgIpsecEndpointPairDecryptErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairEntry 10 }

    wgIpsecEndpointPairAuthErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to authentication
            error since the establish of this connection."
        ::= { wgIpsecEndpointPairEntry 11 }

    wgIpsecEndpointPairReplayErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to replay
            error since the establish of this connection."
        ::= { wgIpsecEndpointPairEntry 12}

    wgIpsecEndpointPairPolicyErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairEntry 13 }

    wgIpsecEndpointPairPadErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairEntry 14 }

    wgIpsecEndpointPairOtherReceiveErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairEntry 15 }

    wgIpsecEndpointPairSendErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairEntry 16 }


   -- global statistics

   wgIpsecEndpointPairTotalInSAs  OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of active inbound SA's in the entity."
        ::= { wgIpsecEndpointPairStatistics 1 }

   wgIpsecEndpointPairTotalOutSAs  OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of active outbound SA's in the entity."
        ::= { wgIpsecEndpointPairStatistics 2 }

   wgIpsecEndpointPairTotalInAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total inbound IPsec traffic of this entity."
        ::= { wgIpsecEndpointPairStatistics 3 }

   wgIpsecEndpointPairTotalOutAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total outbound IPsec traffic of this entity."
        ::= { wgIpsecEndpointPairStatistics 4 }

   wgIpsecEndpointPairTotalInPackets  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total inbound IPsec packets of this entity."
        ::= { wgIpsecEndpointPairStatistics 5 }

   wgIpsecEndpointPairTotalOutPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total outbound IPsec packets of this entity."
        ::= { wgIpsecEndpointPairStatistics 6 }


    wgIpsecEndpointPairTotalDecryptErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairStatistics 7 }

    wgIpsecEndpointPairTotalAuthErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets on this entity discarded 
           due to authentication errors."
        ::= { wgIpsecEndpointPairStatistics 8 }

    wgIpsecEndpointPairTotalReplayErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets discarded due to replay
           errors on this entity."
        ::= { wgIpsecEndpointPairStatistics 9 }

    wgIpsecEndpointPairTotalPolicyErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairStatistics 10 }

    wgIpsecEndpointPairTotalPadErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairStatistics 11 }

    wgIpsecEndpointPairTotalOtherReceiveErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairStatistics 12 }

    wgIpsecEndpointPairTotalSendErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Deprecated, currently unused."
        ::= { wgIpsecEndpointPairStatistics 13 }

    wgIpsecEndpointPairPeerIPToTunnel OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all tunnels
             information of the policies."
        ::= {wgIpsecEndpointPairMIB 3}

    wgIpsecEndpointPairPeerIPToTunnelNum OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of tunnels in the peeriptotunnel table. "
        ::= { wgIpsecEndpointPairPeerIPToTunnel 1 }

    wgIpsecEndpointPairPeerIPToTunnelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF WGIpsecEndpointPairPeerIPToTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The peeriptotunnel table in the endpointpair mib."
        ::= { wgIpsecEndpointPairPeerIPToTunnel 2 }

    wgIpsecEndpointPairPeerIPToTunnelEntry OBJECT-TYPE
        SYNTAX      WGIpsecEndpointPairPeerIPToTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry (conceptual row) containing the peer ip and tunnel
            information."
        INDEX {
            wgIpsecEndpointPairPeerIPToTunnelPeerIP,
            wgIpsecEndpointPairPeerIPToTunnelTunnelID
        }
        ::= { wgIpsecEndpointPairPeerIPToTunnelTable 1 }

    WGIpsecEndpointPairPeerIPToTunnelEntry ::= SEQUENCE {

        wgIpsecEndpointPairPeerIPToTunnelPeerIP      IpAddress,
        wgIpsecEndpointPairPeerIPToTunnelTunnelID    Unsigned32
    }
    
    wgIpsecEndpointPairPeerIPToTunnelPeerIP  OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The peer ip of the peeriptotunnel table."
        ::= {wgIpsecEndpointPairPeerIPToTunnelEntry 1}
            
    wgIpsecEndpointPairPeerIPToTunnelTunnelID  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The tunnel id of the peeriptotunnel table."
        ::= {wgIpsecEndpointPairPeerIPToTunnelEntry 2}
        
END

