
AC-MEDIA-MIB DEFINITIONS ::= BEGIN


    IMPORTS
       

        OBJECT-TYPE, 
        MODULE-IDENTITY                             FROM SNMPv2-SMI
        TAddress, 
        DisplayString, 
        DateAndTime, TEXTUAL-CONVENTION             FROM SNMPv2-TC
        IpAddress                                   FROM RFC1155-SMI
        Unsigned32,
		Integer32,
        enterprises                                 FROM SNMPv2-SMI
	RowStatus      				    FROM SNMPv2-TC
		SnmpAdminString			    FROM SNMP-FRAMEWORK-MIB
		audioCodes,       
        acRegistrations,
        acGeneric, 
        acProducts,acBoardMibs 						FROM AUDIOCODES-TYPES-MIB;

       
acMedia  MODULE-IDENTITY       
    LAST-UPDATED "201207260501Z"          --Thursday, July 26 2012
    ORGANIZATION "AudioCodes Ltd"
    CONTACT-INFO
    "Postal: Support
	     AudioCodes LTD
             1 Hayarden Street
             Airport City 
	     Lod, ISRAEL 70151
     Tel:    972-3-9764000
     Fax:    972-3-9764040
     Email:  support@audiocodes.com
     Web:    www.audiocodes.com"		

    DESCRIPTION       
    ""



    ::= {acBoardMibs 4}  








     acMediaConfiguration OBJECT IDENTIFIER ::= {acMedia 1}


     acMediaDSPConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 1}


     acMediaDSPConfigVersionTemplateNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the DSP load number. Each load has a different coder
list, a different channel capacity and different features supported.

Range = 0 to 255.
Access: Offline.
AC INI-Param: DSPVERSIONTEMPLATENUMBER"
       ::= {acMediaDSPConfig 1}



     -- ****************************************
     -- acMediaDsp table declaration
     -- ****************************************
     acMediaDspTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcMediaDspEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acMediaDSPConfig 21}



     -- ****************************************
     -- acMediaDsp table entry
     -- ****************************************
     acMediaDspEntry OBJECT-TYPE
       SYNTAX AcMediaDspEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acMediaDspIndex}
       ::= {acMediaDspTable 1}



     -- ****************************************
     -- acMediaDsp TABLE
     -- ****************************************
     AcMediaDspEntry ::= SEQUENCE {
       acMediaDspIndex                                 Unsigned32,
       acMediaDspRowStatus                             RowStatus,
       acMediaDspTemplateNumber                        Unsigned32,
       acMediaDspResourcesPercentage                   Unsigned32
     }



     acMediaDspIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Entry number in the table.
AC INI-Param: DspTemplates_Index"
       ::= {acMediaDspEntry 1}



     acMediaDspRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acMediaDspEntry 2}



     acMediaDspTemplateNumber OBJECT-TYPE
       SYNTAX Unsigned32 (0..16)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "DSP template number.
Access: Offline.
AC INI-Param: DspTemplates_DspTemplateNumber"
       ::= {acMediaDspEntry 3}



     acMediaDspResourcesPercentage OBJECT-TYPE
       SYNTAX Unsigned32 (0..100)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Percentage use for the specified template.
Access: Offline.
AC INI-Param: DspTemplates_DspResourcesPercentage"
       ::= {acMediaDspEntry 4}



     acMediaVoiceConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 2}


     acVoice OBJECT IDENTIFIER ::= {acMediaVoiceConfig 1}


     acVoicePayloadFormat OBJECT-TYPE
       SYNTAX INTEGER {
                  voicePayloadFormatRTP(0)
,
                  voicePayloadFormatATM(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the voice payload format. Choose either 0 = RTP or 1 =
ATM (which enables working with vendors that use G.726 ATM Payload
Format over RTP. Uses the enum acTVoicePayloadFormat.
0 = VoicePayloadFormatRTP
1 = VoicePayloadFormatATM
2 = VoicePAyloadFormatIllegal.
Access: Online.
AC INI-Param: VOICEPAYLOADFORMAT"
       ::= {acVoice 1}



     acVoiceVolume OBJECT-TYPE
       SYNTAX Integer32 (-32..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the voice output gain control.
Range: -32 dB to +31 dB in 1 dB steps
-32 = mute
Default = 0 = No Gain.
Access: Online.
AC INI-Param: VOICEVOLUME"
       ::= {acVoice 2}



     acVoiceInputGain OBJECT-TYPE
       SYNTAX Integer32 (-32..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the PCM input gain. 
Range = -32 dB to +31 dB in 1 dB steps.
Default = No Gain.
Access: Online.
AC INI-Param: INPUTGAIN"
       ::= {acVoice 3}



     acVoiceTestMode OBJECT-TYPE
       SYNTAX INTEGER {
                  coderLoopback(0)
,
                  pCMLoopback(1)
,
                  toneInjection(2)
,
                  noLoopback(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the type of testing mode applied:

0 = Coder Loopback performs an encoder/decoder loopback inside
the DSP device
1 = PCM Loopback loops back an incoming PCM to the outgoing
PCM.
2 = ToneInjection generates a 1000 Hz tone to the outgoing
PCM
3 = NoLoopback sets the channel to work in normal mode.
Access: Online.
AC INI-Param: TESTMODE"
       ::= {acVoice 4}



     acVoiceTTYTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  inband-Relay(2)
,
                  bypass (1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the transferring method of TTY signals during a call


0 = Disable
1= Bypass
2 = Relay
.
Access: Online.
AC INI-Param: TTYTRANSPORTTYPE"
       ::= {acVoice 5}



     acVoiceEnableMediaSecurity OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Media Security protocol (SRTP) . Enabling
this parameter might reduce the board channel capacity.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEMEDIASECURITY"
       ::= {acVoice 6}



     acVoiceAriaProtocolSupport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Aria encryption protocol. Enabling this
parameter might reduce the board channel capacity.

0 = Disable
1 = Enable
Supported on TP6310, TP8410 and M800.
Access: Offline.
AC INI-Param: AriaProtocolSupport"
       ::= {acVoice 7}



     acVoiceCoderRate OBJECT IDENTIFIER ::= {acVoice 20}


     acVoiceCoderRateEVRC OBJECT-TYPE
       SYNTAX INTEGER {
                  variableRate(0)
,
                  ac1kbps(1)
,
                  ac4kbps(2)
,
                  ac8kbps(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to configure the EVRC coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 4 kbps
3 = 8 kbps.
Access: Online.
AC INI-Param: EVRCRate"
       ::= {acVoiceCoderRate 1}



     acVoiceCoderRateQCELP8 OBJECT-TYPE
       SYNTAX INTEGER {
                  variableRate(0)
,
                  ac1kbps(1)
,
                  ac2kbps(2)
,
                  ac4kbps(3)
,
                  ac8kbps(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to configure the QCELP8  coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 2 kbps
3 = 4 kbps
4 = 8 kbps.
Access: Online.
AC INI-Param: QCELP8Rate"
       ::= {acVoiceCoderRate 2}



     acVoiceCoderRateQCELP13 OBJECT-TYPE
       SYNTAX INTEGER {
                  variableRate(0)
,
                  ac1kbps(1)
,
                  ac3kbps(2)
,
                  ac7kbps(3)
,
                  ac13kbps(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter is used to configure the QCELP13 coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 3 kbps
3 = 7 kbps
4 = 13 kbps

.
Access: Online.
AC INI-Param: QCELP13Rate"
       ::= {acVoiceCoderRate 3}



     acVoiceCoderRateG729EVMaxBitRate OBJECT-TYPE
       SYNTAX INTEGER {
                  g729EV-RATE-8-KBPS (0)
,
                  g729EV-RATE-12-KBPS (1)
,
                  g729EV-RATE-14-KBPS (2)
,
                  g729EV-RATE-16-KBPS (3)
,
                  g729EV-RATE-18-KBPS (4)
,
                  g729EV-RATE-20-KBPS (5)
,
                  g729EV-RATE-22-KBPS (6)
,
                  g729EV-RATE-24-KBPS (7)
,
                  g729EV-RATE-26-KBPS (8)
,
                  g729EV-RATE-28-KBPS (9)
,
                  g729EV-RATE-30-KBPS (10)
,
                  g729EV-RATE-32-KBPS (11)
,
                  g729EV-RATE-UNDEFINED (15)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the maximum generation bitrate for all participants
in a session using G729EV coder. This parameter is defined
per session and is equal for all the parties. The initial
generation bit rate is the minimum between the MaxBitRate and
the MBS values.

Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS 
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS 
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS 
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS 
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS 
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS 
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVMaxBitRate"
       ::= {acVoiceCoderRate 4}



     acVoiceCoderRateG729EVLocalMBS OBJECT-TYPE
       SYNTAX INTEGER {
                  g729EV-RATE-8-KBPS (0)
,
                  g729EV-RATE-12-KBPS (1)
,
                  g729EV-RATE-14-KBPS (2)
,
                  g729EV-RATE-16-KBPS (3)
,
                  g729EV-RATE-18-KBPS (4)
,
                  g729EV-RATE-20-KBPS (5)
,
                  g729EV-RATE-22-KBPS (6)
,
                  g729EV-RATE-24-KBPS (7)
,
                  g729EV-RATE-26-KBPS (8)
,
                  g729EV-RATE-28-KBPS (9)
,
                  g729EV-RATE-30-KBPS (10)
,
                  g729EV-RATE-32-KBPS (11)
,
                  g729EV-RATE-UNDEFINED (15)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the maximal bitrate, which may be used  by the G729EV
coder at a specific channel. This parameter is defined
per channel and may vary between the parties. The initial generation
bit rate is the minimum between the MaxBitRate and
the MBS values.

Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS 
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS 
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS 
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS 
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS 
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS 
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVLocalMBS"
       ::= {acVoiceCoderRate 5}



     acVoiceCoderRateG729EVReceiveMBS OBJECT-TYPE
       SYNTAX INTEGER {
                  g729EV-RATE-8-KBPS (0)
,
                  g729EV-RATE-12-KBPS (1)
,
                  g729EV-RATE-14-KBPS (2)
,
                  g729EV-RATE-16-KBPS (3)
,
                  g729EV-RATE-18-KBPS (4)
,
                  g729EV-RATE-20-KBPS (5)
,
                  g729EV-RATE-22-KBPS (6)
,
                  g729EV-RATE-24-KBPS (7)
,
                  g729EV-RATE-26-KBPS (8)
,
                  g729EV-RATE-28-KBPS (9)
,
                  g729EV-RATE-30-KBPS (10)
,
                  g729EV-RATE-32-KBPS (11)
,
                  g729EV-RATE-UNDEFINED (15)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the value of the MBS field of the G729EV frames to
be sent to the other party. This parameter reflects the maximum
bit rate, which the local G729EV  supports as a receiver.

Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS 
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS 
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS 
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS 
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS 
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS 
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVReceiveMBS"
       ::= {acVoiceCoderRate 6}



     acVoiceCoderRateMsRtaForwardErrorCorrectionEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the Microsoft RTA coder forward error correction
mode.

0 - Disable.
1 - Enable.
Access: Online.
AC INI-Param: MSRTAForwardErrorCorrectionEnable"
       ::= {acVoiceCoderRate 7}



     acVoiceCoderRateMsRtaTxBitRate OBJECT-TYPE
       SYNTAX Unsigned32 (0..29000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the Microsoft RTA coder TX bit rate.

0 - Automatic.
Any value between 8,800 - 29,000.
Access: Online.
AC INI-Param: MSRTATxBitRate"
       ::= {acVoiceCoderRate 8}



     acVoiceCoderRateSilkTxInbandFEC OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the SILK encoder forward error correction mode.
Access: Online.
AC INI-Param: SilkTxInbandFEC"
       ::= {acVoiceCoderRate 9}



     acVoiceCoderRateSilkMaxAverageBitRate OBJECT-TYPE
       SYNTAX Unsigned32 (5000..30000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the SILK encoder maximal average bit rate. Narrow
band range is 5000-16000 .Wide band range is 8000-30000.
Access: Online.
AC INI-Param: SilkMaxAverageBitRate"
       ::= {acVoiceCoderRate 10}



     acVoiceCoderRateSpeexNBBitRate OBJECT-TYPE
       SYNTAX INTEGER {
                  cE-SPEEX-NB-RATE-2-15-KBPS(1)
,
                  cE-SPEEX-NB-RATE-5-95-KBPS(2)
,
                  cE-SPEEX-NB-RATE-8-00-KBPS(3)
,
                  cE-SPEEX-NB-RATE-11-0-KBPS(4)
,
                  cE-SPEEX-NB-RATE-15-0-KBPS(5)
,
                  cE-SPEEX-NB-RATE-18-2-KBPS(6)
,
                  cE-SPEEX-NB-RATE-24-6-KBPS(7)
,
                  cE-SPEEX-NB-RATE-3-95-KBPS(8)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the bitrate of Speex NB coder.
Access: Instant.
AC INI-Param: SpeexNBBitRate"
       ::= {acVoiceCoderRate 11}



     acVoiceCoderRateSpeexWBBitRate OBJECT-TYPE
       SYNTAX INTEGER {
                  cE-SPEEX-WB-RATE-3-95-KBPS(0)
,
                  cE-SPEEX-WB-RATE-5-75-KBPS(1)
,
                  cE-SPEEX-WB-RATE-7-75-KBPS(2)
,
                  cE-SPEEX-WB-RATE-9-80-KBPS(3)
,
                  cE-SPEEX-WB-RATE-12-8-KBPS(4)
,
                  cE-SPEEX-WB-RATE-16-8-KBPS(5)
,
                  cE-SPEEX-WB-RATE-20-6-KBPS(6)
,
                  cE-SPEEX-WB-RATE-23-8-KBPS(7)
,
                  cE-SPEEX-WB-RATE-27-8-KBPS(8)
,
                  cE-SPEEX-WB-RATE-34-2-KBPS(9)
,
                  cE-SPEEX-WB-RATE-42-2-KBPS(10)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the bitrate of Speex WB coder.
Access: Instant.
AC INI-Param: SpeexWBBitRate"
       ::= {acVoiceCoderRate 12}



     acVoiceAGC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 2}


     acVoiceAGCEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Activates the AGC (Automatic Gain Control).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEAGC"
       ::= {acVoiceAGC 1}



     acVoiceAGCGainSlope OBJECT-TYPE
       SYNTAX Unsigned32 (0..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AGC (Automatic Gain Control) convergence rate.
Range = 0 to 31 (according to acTAGCGainSlope)
Default = 3 (= 1 db/sec).
Access: Online.
AC INI-Param: AGCGAINSLOPE"
       ::= {acVoiceAGC 2}



     acVoiceAGCRedirection OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AGC (Automatic Gain Control) direction. 
0 = AGC works on signals from the TDM side 
1 = AGC works on signals coming from the Network side.
Access: Online.
AC INI-Param: AGCREDIRECTION"
       ::= {acVoiceAGC 3}



     acVoiceAGCTargetEnergy OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the signal energy value [-dBm] that the AGC (Automatic
Gain Control) attempts to attain.

Range = 0 to 63.
Access: Online.
AC INI-Param: AGCTARGETENERGY"
       ::= {acVoiceAGC 4}



     acVoiceAGCMinGain OBJECT-TYPE
       SYNTAX Unsigned32 (0..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the minimum gain by the AGC when activated [- db].

Range = 0 to -31.
Access: Offline.
AC INI-Param: AGCMINGAIN"
       ::= {acVoiceAGC 5}



     acVoiceAGCMaxGain OBJECT-TYPE
       SYNTAX Unsigned32 (0..18)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the maximum gain by the AGC when activated [db].

Range =  0 to 18.
Access: Offline.
AC INI-Param: AGCMAXGAIN"
       ::= {acVoiceAGC 6}



     acVoiceAGCDisableFastAdaptation OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Disables the AGC Fast Adaptation mode.

Enable = 1 
Disable = 0.
Access: Offline.
AC INI-Param: AGCDISABLEFASTADAPTATION"
       ::= {acVoiceAGC 7}



     acVoiceEC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 3}


     acVoiceECEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the Echo Canceller.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEECHOCANCELLER"
       ::= {acVoiceEC 1}



     acVoiceECMaxLength OBJECT-TYPE
       SYNTAX INTEGER {
                  eCLengthDefault(0)
,
                  eCLength15MSec(1)
,
                  eCLength20MSec(2)
,
                  eCLength25MSec(3)
,
                  eCLength32MSec(4)
,
                  eCLength35MSec(5)
,
                  eCLength40MSec(6)
,
                  eCLength45MSec(7)
,
                  eCLength50MSec(8)
,
                  eCLength55MSec(9)
,
                  eCLength60MSec(10)
,
                  eCLength64MSec(11)
,
                  eCLength128MSec(22)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the maximum board EC (Echo Canceler) length capability.

0 = EC length determined internally to reach maximum channel
capacity.
4 = 32 msec
11 = 64 msec
22 = 128 msec
TP-1610 only: 
Using 64 or 128 msec reduces the channel capacity to 200 channels.
.
Access: Offline.
AC INI-Param: MAXECHOCANCELLERLENGTH"
       ::= {acVoiceEC 2}



     acVoiceECHybridLoss OBJECT-TYPE
       SYNTAX INTEGER {
                  eCHybridLoss6DBM(0)
,
                  eCHybridLoss0DBM(2)
,
                  eCHybridLoss3DBM(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the worst case ratio between the signal level transmitted
to the hybrid and the echo level returning from hybrid. Set
this per worst hybrid in the system in terms of echo return
loss. Refer to the enumeration acTECHybridLoss.

0 = 6 dBm
2 = 0 dBm
3 = 3 dBm.
Access: Online.
AC INI-Param: ECHYBRIDLOSS"
       ::= {acVoiceEC 3}



     acVoiceECToneDetector OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to configure the Echo Canceler Tone Detector. Detects a
2100 Hz tone at the input signal to the TDM (received signal).
Improves Echo Canceler operation accordingly. Detects 2100,
2100 with phase reversals and 2100 with AM. Improves the
operation of the Echo Canceler by slowing adaptation when the
signal is detected. This data is also used by the fax state
machine.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableToneDetector"
       ::= {acVoiceEC 4}



     acVoiceECComfortNoiseGeneration OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Use this parameter to enable or enable Echo Canceler Comfort
Noise Generation, which generates comfort noise when the Non
Linear Processor (NLP) is active. 
When the NLP ascertains that the signal is echo and not doubletalk
and decides to clip, instead of transmitting silence
it transmits a synthesized signal similar to the background
noise.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableComfortNoiseGeneration"
       ::= {acVoiceEC 5}



     acVoiceSC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 4}


     acVoiceSCMode OBJECT-TYPE
       SYNTAX INTEGER {
                  sILENCE-COMPRESION-DISABLE(0)
,
                  sILENCE-COMPRESION-ENABLE(1)
,
                  sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Silence Suppression Mode. 

0 = Disable = SILENCE_COMPRESION_DISABLE
1 = Enable = SILENCE_COMPRESION_ENABLE
2 = Enable without adaptation =  SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE.
Access: Online.
AC INI-Param: ENABLESILENCECOMPRESSION"
       ::= {acVoiceSC 1}



     acVoiceSCVBRCoderDTXMin OBJECT-TYPE
       SYNTAX Unsigned32 (0..20000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the minimum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
.
Access: Online.
AC INI-Param: EVRCDTXMin"
       ::= {acVoiceSC 2}



     acVoiceSCVBRCoderDTXMax OBJECT-TYPE
       SYNTAX Unsigned32 (0..20000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the maximum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
Access: Online.
AC INI-Param: EVRCDTXMax"
       ::= {acVoiceSC 3}



     acVoiceSCVBRCoderHangover OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "For indicating the desired number of silence frames at the beginning
of each silence period, when using the VBR CODER silence
suppression.
.
Access: Online.
AC INI-Param: VBRCoderHangover"
       ::= {acVoiceSC 4}



     acMediaFaxModemConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 3}


     acFaxModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 1}


     acFMCommon OBJECT IDENTIFIER ::= {acFaxModem 1}


     acFMCommonRelayVolume OBJECT-TYPE
       SYNTAX Integer32 (-18..-3)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the fax gain control. 

The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps
of 1 dBm.
Access: Online.
AC INI-Param: FAXMODEMRELAYVOLUME"
       ::= {acFMCommon 1}



     acFMCommonV34Transport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)
,
                  ansMute(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the V.34 modem transport method.

0 = Transparent
2 = Bypass 
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V34MODEMTRANSPORTTYPE"
       ::= {acFMCommon 2}



     acFMCommonEnableInbandNetworkDetection OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables inband network detection related to fax/modem.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: EnableFaxModemInbandNetworkDetection"
       ::= {acFMCommon 3}



     acFMCommonCEDTransferMode OBJECT-TYPE
       SYNTAX INTEGER {
                  usingFaxRelayOrVBD(0)
,
                  voiceModeOrVBD(1)
,
                  rFC4733BlockingRTPVBD(2)
,
                  rFC4733AlongWithRTPVBD(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "0 - transfer CED using T38.
1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0).
2 - transfer CED using RFC, and block CED over VBD/VoIP.
3 - transfer CED using RFC in parallel with CED over VBD/VoIP.
Access: Instant.
AC INI-Param: CEDTransferMode"
       ::= {acFMCommon 4}



     acFMBypass OBJECT IDENTIFIER ::= {acFaxModem 2}


     acFMBypassCoderType OBJECT-TYPE
       SYNTAX INTEGER {
                  g711Alaw-64(0)
,
                  g711Mulaw(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Users can use this parameter to set the fax/modem bypass coder
(according to acTCoders).

0 = G.711 A-Law
1 = G.711 Mu-Law.
Access: Online.
AC INI-Param: FAXMODEMBYPASSCODERTYPE"
       ::= {acFMBypass 1}



     acFMBypassPacketizationPeriod OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the number of basic frames to generate one RTP fax/modem
bypass packet.
Access: Online.
AC INI-Param: FAXMODEMBYPASSM"
       ::= {acFMBypass 2}



     acFMBypassBasicPacketInterval OBJECT-TYPE
       SYNTAX INTEGER {
                  pACKET-INTERVAL-DEFAULT(0)
,
                  pACKET-INTERVAL-5-MSEC(1)
,
                  pACKET-INTERVAL-10-MSEC(2)
,
                  pACKET-INTERVAL-20-MSEC(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the basic Fax / Modem Bypass RTP packet rate.
0 = Default (set internally) (PACKET_INTERVAL_DEFAULT)
1 = 5 msec (PACKET_INTERVAL_5_MSEC)
2 = 10 msec (PACKET_INTERVAL_10_MSEC)
3 = 20 msec (PACKET_INTERVAL_20_MSEC).
Access: Online.
AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL"
       ::= {acFMBypass 3}



     acFMBypassDJBufMinDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..150)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the Jitter Buffer constant delay (in milliseconds)
during a Fax & Modem Bypass session. (The minimum Jitter Buffer
Size).

Range = 0 to 150.
Access: Online.
AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY"
       ::= {acFMBypass 4}



     acFMBypassFaxBypassOutputGain OBJECT-TYPE
       SYNTAX Integer32 (-31..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the fax bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: FaxBypassOutputGain"
       ::= {acFMBypass 5}



     acFMBypassModemBypassOutputGain OBJECT-TYPE
       SYNTAX Integer32 (-31..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the modem bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: ModemBypassOutputGain"
       ::= {acFMBypass 6}



     acFMNSE OBJECT IDENTIFIER ::= {acFaxModem 3}


     acFMNSEPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Users can use this parameter to modify the NSE packet's payload
type.

Range = 96 to 127.
Access: Online.
AC INI-Param: NSEPAYLOADTYPE"
       ::= {acFMNSE 1}



     acFMNSEMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Cisco's NSE fax / modem automatic pass-through
mode.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: NSEMODE"
       ::= {acFMNSE 2}



     acFax OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 2}


     acFaxTransportMode OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the Fax over IP transport method.

0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: FAXTRANSPORTMODE"
       ::= {acFax 1}



     acFaxBypassPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (0..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Users can use this parameter to modify the Fax Bypass Mode RTP
packet's payload type. 
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (102). 
It is the user's responsibility to avoid congestion with other
payload types.

Range = 0 to 127.
Access: Online.
AC INI-Param: FAXBYPASSPAYLOADTYPE"
       ::= {acFax 2}



     acFaxRelayECMEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the using of ECM mode during Fax Relay.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: FAXRELAYECMENABLE"
       ::= {acFax 3}



     acFaxRelayMaxRate OBJECT-TYPE
       SYNTAX INTEGER {
                  acRate2400bps(0)
,
                  acRate4800bps(1)
,
                  acRate7200bps(2)
,
                  acRate9600bps(3)
,
                  acRate12000bps(4)
,
                  acRate14400bps(5)
,
                  acRate16800bps(6)
,
                  acRate19200b(7)
,
                  acRate21600bps(8)
,
                  acRate24000bps(9)
,
                  acRate26400bps(10)
,
                  acRate28800bps(11)
,
                  acRate31200bps(12)
,
                  acRate33600bps(13)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Limits the maximum rate at which fax messages are transmitted.

0 = 2400 bps
1 = 4800 bps
2 = 7200 bps
3 = 9600 bps
4 = 12000 bps
5 = 14400 bps
6 = 16800 bps
7 = 19200 bps
8 = 21600 bps
9 = 24000 bps
10 = 26400 bps
11 = 28800 bps
12 = 31200 bps
13 = 33600 bps.
Access: Online.
AC INI-Param: FAXRELAYMAXRATE"
       ::= {acFax 4}



     acFaxRelayRedundancyDepth OBJECT-TYPE
       SYNTAX Unsigned32 (0..2)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the depth of redundancy for fax packets. This parameter
is applicable only to non-V.21 packets.

0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy.
Access: Online.
AC INI-Param: FAXRELAYREDUNDANCYDEPTH"
       ::= {acFax 5}



     acFaxEnhancedRelayRedundancyDepth OBJECT-TYPE
       SYNTAX Unsigned32 (0..4)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the number of repetitions to be applied to control
packets when using the T.38 standard.

0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy
3 = 3 packet redundancy
4 = Maximum redundancy.
Access: Online.
AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH"
       ::= {acFax 6}



     acFaxCNGDetectorMode OBJECT-TYPE
       SYNTAX INTEGER {
                  cNG-DETECTOR-MODE-DISABLE(0)
,
                  cNG-DETECTOR-MODE-RELAY(1)
,
                  cNG-DETECTOR-MODE-EVENT-ONLY(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the CNG Detector mode. 
0 = Disable 
1 = Relay 
2 = Event Only.
Access: Online.
AC INI-Param: CNGDETECTORMODE"
       ::= {acFax 7}



     acFaxV34TransportMethod OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the V.34 fax  transport method.

One of the following values:

0 = Transparent
1 = Relay
2 = Bypass 
3 = Transparent with Events.
Access: Online.
AC INI-Param: V34FAXTRANSPORTTYPE"
       ::= {acFax 8}



     acFaxT38Version OBJECT-TYPE
       SYNTAX INTEGER {
                  t38Version0(0)
,
                  t38Version3(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "T38 fax relay version.

0 = T.38 version 0 (from 06/1998)
3 = T.38 version 3 (V.34 over T.38 support)

Default = 3.
Access: Online.
AC INI-Param: T38Version"
       ::= {acFax 9}



     acModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 3}


     acModemV22Transport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the V.22 modem transport method.

0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V22MODEMTRANSPORTTYPE"
       ::= {acModem 1}



     acModemV23Transport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the V.23 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V23MODEMTRANSPORTTYPE"
       ::= {acModem 2}



     acModemV32Transport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)
,
                  ansMute(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the V.32 modem transport method.

0 = Transparent
2 = Bypass
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V32MODEMTRANSPORTTYPE"
       ::= {acModem 3}



     acModemBypassPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (0..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Users can use this parameter to modify the Modem Bypass Mode
RTP packet's payload type. 
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (103). 
It is the user's responsibility to avoid congestion with other
payload types.

Range = 0 to 127.
Access: Online.
AC INI-Param: MODEMBYPASSPAYLOADTYPE"
       ::= {acModem 4}



     acModemBellTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Use this parameter to set the Bell modem transport method. 
0 = Transparent 
2 = Bypass (enum ByPassEnable)
3 = Transparent with Events (enum EventsOnly).
Access: Online.
AC INI-Param: BellModemTransportType"
       ::= {acModem 5}



     acModemV21Transport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  relayEnable(1)
,
                  byPassEnable(2)
,
                  eventsOnly(3)

                  }
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets the V.21 modem transport method (must be set to 0 = Disable).

0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V21ModemTransportType"
       ::= {acModem 6}



     acModemEnableV150ModemRelaySupport OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "Determines whether to enable V.150.1 modem relay support.

Range:
0 - Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableV150ModemRelaySupport"
       ::= {acModem 7}



     acV150dot1 OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 4}


     acV150dot1AllocationProfile OBJECT-TYPE
       SYNTAX Unsigned32 (0..20)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the V.150.1 profile, determining how many DSP channels
 have V.150.1 support.

Range = 0 to 3.
Access: Offline.
AC INI-Param: V1501AllocationProfile"
       ::= {acV150dot1 1}



     acV150dot1SSEPayloadTypeRx OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SSE payload type RX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeRx"
       ::= {acV150dot1 2}



     acV150dot1SSEPayloadTypeTx OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SSE payload type TX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeTx"
       ::= {acV150dot1 3}



     acV150dot1SSERedundancyDepth OBJECT-TYPE
       SYNTAX Unsigned32 (1..6)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SSE is a part of V150.1 modem relay protocol and SSE messages
are sent over RTP. 
SSE redundancy refers to the sending of SSE messages several
times to increase reliability. This parameter determines the
number of times each SSE message is to be resent.
Access: Online.
AC INI-Param: V1501SSERedundancyDepth"
       ::= {acV150dot1 4}



     acV150dot1SPRTPayloadTypeRx OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT payload type RX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeRx"
       ::= {acV150dot1 5}



     acV150dot1SPRTPayloadTypeTx OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT payload type TX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeTx"
       ::= {acV150dot1 6}



     acV150dot1SPRTTransportChannel0MaxPayloadSize OBJECT-TYPE
       SYNTAX Unsigned32 (140..256)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT transport channel 0 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize"
       ::= {acV150dot1 7}



     acV150dot1SPRTTransportChannel2MaxPayloadSize OBJECT-TYPE
       SYNTAX Unsigned32 (132..256)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT transport channel 2 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize"
       ::= {acV150dot1 8}



     acV150dot1SPRTTransportChannel2MaxWindowSize OBJECT-TYPE
       SYNTAX Unsigned32 (8..32)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT transport channel 2 max window size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize"
       ::= {acV150dot1 9}



     acV150dot1SPRTTransportChannel3MaxPayloadSize OBJECT-TYPE
       SYNTAX Unsigned32 (140..256)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "SPRT transport channel 3 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize"
       ::= {acV150dot1 10}



     acMediaRtpRtcpConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 4}


     acRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 1}


     acRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (3..2684354)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines for how long the RTP connection should be broken
before the Broken Connection event is issued. In units of 100
msec.
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT"
       ::= {acRtpRtcp 1}



     acRtpRtcpBrokenConnectionEventActivationMode OBJECT-TYPE
       SYNTAX INTEGER {
                  afterFirstIncomingRTPPacket(0)
,
                  onRTPStreamActivation(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines if the broken connection mechanism is activated when
the RTP stream is activated or when the first RTP packet
is received.
0 = After First incoming packet (default)
1 = Upon channels RTP activation. 
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE"
       ::= {acRtpRtcp 2}



     acRtpRtcpBasicRTPPacketInterval OBJECT-TYPE
       SYNTAX INTEGER {
                  pACKET-INTERVAL-DEFAULT(0)
,
                  pACKET-INTERVAL-5-MSEC(1)
,
                  pACKET-INTERVAL-10-MSEC(2)
,
                  pACKET-INTERVAL-20-MSEC(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the RTP packet rate for sample based coders (such as
G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728.
0 = Default (set internally)
1 = 5 msec
2 = 10 msec
3 = 20 msec.
Access: Online.
AC INI-Param: BASICRTPPACKETINTERVAL"
       ::= {acRtpRtcp 3}



     acRtpRtcpConnectionEstablishNotificationMode OBJECT-TYPE
       SYNTAX INTEGER {
                  afterBrokenConnection(0)
,
                  uponFirstRTPFrameDetection(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the notification mode for the RTP connection establishment
event acEV_CONNECTION_ESTABLISHED.
0 = Notify only after a broken connection event
1 = Also notify when the first RTP packet is received.
Access: Online.
AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE"
       ::= {acRtpRtcp 4}



     acRtpRtcpEnableMediaUDPChecksum OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to enable the UDP checksum calculation for
RTP media TX over IPv4. One of the following possible values:


0 = Disable (No checksum: UDP checksum for IPv4 TX = 0)
1 = Enable (UDP checksum will be in the UDP header upon IPv4
TX)
.
Access: Offline.
AC INI-Param: EnableMediaUDPChecksum"
       ::= {acRtpRtcp 5}



     acRtp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 2}


     acRtpBaseUDPPort OBJECT-TYPE
       SYNTAX Unsigned32 (1024..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the lower boundary of UDP ports to be used by the board.
The upper boundary is calculated on the basis of BoardBaseUDPPort
+ 10 * (Number of Channels). This parameter value
must be a multiple of 10.


.
Access: Offline.
AC INI-Param: BASEUDPPORT"
       ::= {acRtp 1}



     acRtpComfortNoiseEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "When set to 1 (Enable), SID packets are sent with the RTP SID
type (RFC 3389).
0 = Disable
1 = Enable
Determines whether Silence Indicator (SID) packets that are
sent and received are according to RFC 3389. 
0 = Disabled (default).
1 = Enabled.
Note: Applicable only to MP-11x and Mediant 1000.
.
Access: Online.
AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE"
       ::= {acRtp 2}



     acRtpEnableRFC2658Interleaving OBJECT-TYPE
       SYNTAX INTEGER {
                  withOut-RFC2658Interleaving-And-TOC(0)
,
                  including-RFC2658Interleaving-And-TOC(1)
,
                  including-TOC-Only(2)
,
                  interleave-Bundling(3)

                  }
       MAX-ACCESS read-write
       STATUS obsolete
       DESCRIPTION
           "When enabled, RTP packets include an interleaving byte for VBR
coders.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLERFC2658INTERLEAVING"
       ::= {acRtp 3}



     acRtpRxTxMode OBJECT-TYPE
       SYNTAX INTEGER {
                  rTPTxRx(0)
,
                  rTPTxOnly(1)
,
                  rTPRxOnly(2)
,
                  rTPUnactive(3)
,
                  rTPRxRFC2833Tx(4)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects which RTP directions are enabled. Both Tx and Rx sides
can be disabled.
0 = RTPTxRx
1 = RTPTxOnly
2 = RTPRxOnly
3 = RTPUnactive
4 = RTPRxRFC2833Tx.
Access: Online.
AC INI-Param: RTPDIRECTIONCONTROL"
       ::= {acRtp 4}



     acRtpRFC2833TxPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls the RFC 2833 Tx Relay RTP Payload type.

Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833TXPAYLOADTYPE"
       ::= {acRtp 5}



     acRtpRFC2833RxPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls the RFC 2833 Rx Relay RTP Payload type.

Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833RXPAYLOADTYPE"
       ::= {acRtp 6}



     acRtpRedundancyPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter
'RTP Payload Type'.

Range: 96 to 127.
Access: Online.
AC INI-Param: RFC2198PAYLOADTYPE"
       ::= {acRtp 7}



     acRtpRedundancyDepth OBJECT-TYPE
       SYNTAX Unsigned32 (0..5)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Redundancy depth of RFC 2198 redundancy packets.

0 = Disabled
In Gen 3 boards: range is 0-5
For other Gens 0-1.
Access: Online.
AC INI-Param: RTPREDUNDANCYDEPTH"
       ::= {acRtp 8}



     acRtpPacketizationFactor OBJECT-TYPE
       SYNTAX Unsigned32 (1..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the number of DSP payloads for generating one RTP packet.
Range = Hardware dependent.
Access: Online.
AC INI-Param: RTPPACKINGFACTOR"
       ::= {acRtp 9}



     acRtpNoOpPayloadType OBJECT-TYPE
       SYNTAX Unsigned32 (96..127)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "User can modify the Noop packets RTP Payload type by setting
this parameter.

Range = 96 to 127.
Access: Online.
AC INI-Param: RTPNOOPPAYLOADTYPE"
       ::= {acRtp 10}



     acRtpNoOpEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables / disable Noop packets sending mode.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: NoOpEnable"
       ::= {acRtp 11}



     acRtpNoOpInterval OBJECT-TYPE
       SYNTAX Unsigned32 (20..600000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to modify the Noop  packets sending interval 

Parameter value is in milliseconds
Default value = 10 sec (10000 msec)

Range = 20 to 600000
(20 msec to 10 min - 10 min = 600000).
Access: Online.
AC INI-Param: NoOpInterval"
       ::= {acRtp 12}



     acRtpVBRCoderHeaderFormat OBJECT-TYPE
       SYNTAX INTEGER {
                  withOut-RFC2658Interleaving-And-TOC(0)
,
                  including-RFC2658Interleaving-And-TOC(1)
,
                  including-TOC-Only(2)
,
                  interleave-Bundling(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "0 -  payload only (no header, no toc, no m-factor)

1- support RFC 2658 format, 1 byte for interleaving header
(always 0) and toc, no m-factor

2  payload including toc only, allow m-factor

3- RFC 3358 format
.
Access: Online.
AC INI-Param: VBRCoderHeaderFormat"
       ::= {acRtp 13}



     acRtpAMRCoderHeaderFormat OBJECT-TYPE
       SYNTAX INTEGER {
                  cE-AMR-DEFAULT-FORMAT(0)
,
                  cE-AMR-RFC-3267-BUNDLING(1)
,
                  cE-AMR-RFC-3267-INTERLEAVING(2)
,
                  cE-AMR-IF2(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame
contains CRM byte and toc
RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables
RFC_3267_INTERLEAVING=2 - supported as receivers only.
Access: Online.
AC INI-Param: AMRCODERHEADERFORMAT"
       ::= {acRtp 14}



     acRtpAMRFECRedundancyDepth OBJECT-TYPE
       SYNTAX INTEGER {
                  cE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0)
,
                  cE-AMR-FEC-REDUNDANCY-LEVEL-1(1)
,
                  cE-AMR-FEC-REDUNDANCY-LEVEL-2(2)
,
                  cE-AMR-FEC-REDUNDANCY-LEVEL-3(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the AMR / WB-AMR Redundancy depth according to RFC 3267.

0 = No Redundancy
1 = Redundancy depth of a single packet
2 = Redundancy depth of 2 packets
3 = Redundancy depth of 3 packets
.
Access: Online.
AC INI-Param: AMRFECREDUNDANCYDEPTH"
       ::= {acRtp 15}



     acRtpAMRFECNumOfMngtPolicyEntries OBJECT-TYPE
       SYNTAX Unsigned32 (0..9)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the number of entries to be defined at the AMR management
policy table. Each entry defines the policy of a different
rate.
Access: Online.
AC INI-Param: AMRFECNUMBEROFCODECMODES"
       ::= {acRtp 16}



     acRtpAMRFECDelayHysteresis OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the hysteresis of the Delay Threshold for AMR Hand-out
events (in msec).
Access: Online.
AC INI-Param: AMRFECDELAYHYSTERESIS"
       ::= {acRtp 17}



     acRtpAMRFECDelayThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the one-way delay value (in msec) that may cause the
AMR Hand Out report.

0 = 'Hand Out' report is disabled (default).
Access: Online.
AC INI-Param: AMRFECDELAYTHRESHHOLD"
       ::= {acRtp 18}



     acRtpQcelpCoderHeaderFormat OBJECT-TYPE
       SYNTAX INTEGER {
                  parameter-Is-Not-Used(-1) 
,
                  including-RFC2658Interleaving-And-TOC(1)
,
                  including-TOC-Only(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to define a separate header format for the
QCELP coder (different to the header format of EVRC coder).
One of the following values:

-1       - QCELP coder uses the same header format as EVRC
coder,
            according to VBRCoderHeaderFormat parameter.
1 to 2 - QCELP coder uses the value defined by this parameter
to  
            define its header format.

This parameter is relevant only for Control Protocol users.
TPNCP and PCI users should always use -1 value.
Access: Instant.
AC INI-Param: QcelpCoderHeaderFormat"
       ::= {acRtp 19}



     acRtpAMROctetAlignedEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "0 = disable the AMR Octet Aligned mode.
 1 = enable the AMR Octet Aligned mode.
Access: Online.
AC INI-Param: AmrOctetAlignedEnable"
       ::= {acRtp 20}



     acAMRFECCodecPolicies OBJECT IDENTIFIER ::= {acRtp 21}


     -- ****************************************
     -- acAMRFECCodecPolicies table declaration
     -- ****************************************
     acAMRFECCodecPoliciesTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcAMRFECCodecPoliciesEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acAMRFECCodecPolicies 1}



     -- ****************************************
     -- acAMRFECCodecPolicies table entry
     -- ****************************************
     acAMRFECCodecPoliciesEntry OBJECT-TYPE
       SYNTAX AcAMRFECCodecPoliciesEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acAMRFECCodecPoliciesIndex}
       ::= {acAMRFECCodecPoliciesTable 1}



     -- ****************************************
     -- acAMRFECCodecPolicies TABLE
     -- ****************************************
     AcAMRFECCodecPoliciesEntry ::= SEQUENCE {
       acAMRFECCodecPoliciesIndex                      Unsigned32,
       acAMRFECCodecPoliciesRowStatus                  RowStatus,
       acAMRFECCodecPoliciesRate                       Unsigned32,
       acAMRFECCodecPoliciesRedundancyLevel            Unsigned32,
       acAMRFECCodecPoliciesThreshold                  Unsigned32,
       acAMRFECCodecPoliciesHysteresis                 Unsigned32
     }



     acAMRFECCodecPoliciesIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "
AC INI-Param: AMRFECCodecPolicies_Index"
       ::= {acAMRFECCodecPoliciesEntry 1}



     acAMRFECCodecPoliciesRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "
AC INI-Param: N/A"
       ::= {acAMRFECCodecPoliciesEntry 2}



     acAMRFECCodecPoliciesRate OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "AMR Rate x of policy x (values 0-8).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Rate"
       ::= {acAMRFECCodecPoliciesEntry 3}



     acAMRFECCodecPoliciesRedundancyLevel OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Redundancy Level for policy x. Same values as RFC 3267 Redundancy
field.
Access: Online.
AC INI-Param: AMRFECCodecPolicies_RedundancyLevel"
       ::= {acAMRFECCodecPoliciesEntry 4}



     acAMRFECCodecPoliciesThreshold OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "FLR (Frame Loss Ratio) threshold of policy 1. Values are taken
from 3GPP TS 44.318 (0-63).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Threshold"
       ::= {acAMRFECCodecPoliciesEntry 5}



     acAMRFECCodecPoliciesHysteresis OBJECT-TYPE
       SYNTAX Unsigned32
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Hysteresis of FLR threshold for policy 1. Values are taken from
3GPP TS 44.318. (0-15).
Access: Online.
AC INI-Param: AMRFECCodecPolicies_Hysteresis"
       ::= {acAMRFECCodecPoliciesEntry 6}



     acRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 3}


     acRtcpDisableIntervalRandomization OBJECT-TYPE
       SYNTAX Unsigned32 (0..1)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls whether RTCP report intervals are randomized or whether
each report interval accords exactly to the parameter defining
RTCP Mean Tx Interval (in milliseconds).
0 = Randomize
1 = Dont Randomize.
Access: Online.
AC INI-Param: DISABLERTCPRANDOMIZE"
       ::= {acRtcp 1}



     acRtcpXr OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 4}


     acRtcpXrBurstThreshold OBJECT-TYPE
       SYNTAX Integer32 (-1..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "voice quality monitoring - excessive burst alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONBURSTHR"
       ::= {acRtcpXr 1}



     acRtcpXrDelayThreshold OBJECT-TYPE
       SYNTAX Integer32 (-1..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "voice quality monitoring - excessive delay alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONDELAYTHR"
       ::= {acRtcpXr 2}



     acRtcpXrEndOofCallRvalDelayThreshold OBJECT-TYPE
       SYNTAX Integer32 (-1..12)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "voice quality monitoring - end of call low quality alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONEOCRVALTHR"
       ::= {acRtcpXr 3}



     acRtcpXrGMin OBJECT-TYPE
       SYNTAX Unsigned32 (0..255)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "voice quality monitoring - minimum gap size (number of frames).
Access: Online.
AC INI-Param: VQMONGMIN"
       ::= {acRtcpXr 4}



     acRtcpXrEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)
,
                  enableOnlyCalculation(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets voice quality monitoring (RTCP-XR) mode.

0 = Disable
1 = Enable all
2 = Enable Only Calculation.
Access: Offline.
AC INI-Param: VQMONENABLE"
       ::= {acRtcpXr 5}



     acVideoRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 5}


     acVideoRtpRtcpDisableRtcpIntervalRandomization OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to enable RTCP Interval Randomization. One
of the following values: 0 Enable RTCP Interval Randomization
1 Disable RTCP Interval Randomization
.
Access: Online.
AC INI-Param: VideoDisableRtcpIntervalRandomization"
       ::= {acVideoRtpRtcp 1}



     acVideoRtpRtcpMeanTxInterval OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the mean interval between two transmitted RTCP packets
(milliseconds). If the interval is set to 0, no RTCP packets
are transmitted at all.
Access: Online.
AC INI-Param: VideoRtcpMeanTxInterval"
       ::= {acVideoRtpRtcp 2}



     acVideoRtpRtcpBrokenConnectionActivationMode OBJECT-TYPE
       SYNTAX INTEGER {
                  afterFirstIncomingRtpPacket (0)
,
                  onRtpStreamActivation (1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Broken connection event activation mode.
0 - Activate broken connection after the arrival of the first
RTP packet.
1 - Activate broken connection immediately after the Activate
RTP command.
.
Access: Online.
AC INI-Param: VideoBrokenConnectionActivationMode"
       ::= {acVideoRtpRtcp 3}



     acVideoRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Timeout that defines when broken connection event occurs.
Time resolution is 20msec.
Access: Online.
AC INI-Param: VideoBrokenConnectionEventTimeout"
       ::= {acVideoRtpRtcp 4}



     acMediaIBSConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 5}


     acIBS OBJECT IDENTIFIER ::= {acMediaIBSConfig 1}


     acIBSAnalogSignalTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  ignore(0)
,
                  transfer(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the analog signal transport type. 
0 = Ignore
1 = Transfer hookflash via RFC 2833.
Access: Online.
AC INI-Param: ANALOGSIGNALTRANSPORTTYPE"
       ::= {acIBS 1}



     acIBSDTMFVolume OBJECT-TYPE
       SYNTAX Integer32 (-31..0)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines and controls the DTMF generation volume [-dBm].

Range = -31 to 0.
Access: Online.
AC INI-Param: DTMFVOLUME"
       ::= {acIBS 2}



     acIBSDTMFTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  acMuteDTMF(0)
,
                  acTransparentDTMF(2)
,
                  acRFC2833RelayDTMF(3)
,
                  acRFC2833RelayDecoderMute(7)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the type of DTMF transport. 

0 = Erase DTMFs from voice transport not relayed to remote
2 = DTMFs not erased are not relayed to remote
3 = DTMFs are muted from the voice stream and relayed according
to RFC 2833
7 = DTMFs are sent according to RFC 2833 and muted when received.
Access: Online.
AC INI-Param: DTMFTRANSPORTTYPE"
       ::= {acIBS 3}



     acIBSMFTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  acMuteMF(0)
,
                  acTransparentMF(2)
,
                  acRFC2833RalayMF(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the type of MF transport.

0 = Erase MFs from voice transport not relayed to remote
2 = MFs not erased are not relayed to remote
3 = MFs are muted from the voice stream and relayed according
to RFC 2833.
Access: Online.
AC INI-Param: MFTRANSPORTTYPE"
       ::= {acIBS 4}



     acIBSTrunkTestingTonesEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disables (0)
,
                  enables (1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables trunk testing tones.
0 = Disables trunk testing tones
1 = Enables trunk testing tones.
Access: Offline.
AC INI-Param: ENABLETRUNKTESTINGTONES"
       ::= {acIBS 5}



     acIBSCASRelayTransportMode OBJECT-TYPE
       SYNTAX INTEGER {
                  cASEventsOnly(0)
,
                  cASRFC2833Relay(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls the ABCD signaling transport type over IP. 

0 = No Relay over the network
1 = Enable CAS relay according to RFC 2833.
Access: Online.
AC INI-Param: CASTRANSPORTTYPE"
       ::= {acIBS 6}



     acIBSRxDtmfHangOverTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..2000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Used to configure the Voice Silence time (in ms units) after
playing DTMF or MF digits to the TDM side that arrived as Relay
from the Network side.

Range from 0 to 2000, Default 1000.
Access: Online.
AC INI-Param: RxDtmfHangOverTime"
       ::= {acIBS 7}



     acIBSTxDtmfHangOverTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..2000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Voice Silence time (in ms units) after detecting the end of
DTMF or MF digits at the TDM side when the DTMF Transport Type
is either Relay or Mute.This feature allows the user to configure
the silence time. 
.
Access: Online.
AC INI-Param: TxDtmfHangOverTime"
       ::= {acIBS 8}



     acIBSDTMFTwistControl OBJECT-TYPE
       SYNTAX Integer32 (-10..10)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines a delta (in dB) between the high and low frequency component
in the DTMF signal. dB Positive values cause the higher
frequency component to be stronger than the lower one.
Negative values cause the opposite effect. For any parameter
value, both components change so that their average is constant.

Range = -10 to 10.
Access: Offline.
AC INI-Param: DTMFGenerationTwist"
       ::= {acIBS 9}



     acIBSNTEMaxDuration OBJECT-TYPE
       SYNTAX Integer32 (-1..200000000)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Maximal time for sending NTEs (Named Telephony Events) to the
network, regardless of the time range when the TDM signal
is detected.

-1= NTE will stop only upon detection of End event (default).
Access: Online.
AC INI-Param: NTEMaxDuration"
       ::= {acIBS 10}



     acIBSDetectors OBJECT IDENTIFIER ::= {acMediaIBSConfig 2}


     acIBSDetectorsMFR1Enable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of MFR1 signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR1DETECTORENABLE"
       ::= {acIBSDetectors 1}



     acIBSDetectorsMFR2ForwardEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of MFR2 forward signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR2FORWARDDETECTORENABLE"
       ::= {acIBSDetectors 2}



     acIBSDetectorsMFR2BackwardEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of MFR2 backward signaling.
Access: Online.
AC INI-Param: MFR2BACKWARDDETECTORENABLE"
       ::= {acIBSDetectors 3}



     acIBSDetectorsR1LineEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R1LINEDETECTORENABLE"
       ::= {acIBSDetectors 4}



     acIBSDetectorsR2LineEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R2LINEDETECTORENABLE"
       ::= {acIBSDetectors 5}



     acIBSDetectorsAC15Enable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of Line signaling.
Access: Online.
AC INI-Param: AC15DETECTORENABLE"
       ::= {acIBSDetectors 6}



     acIBSDetectorsDTMFEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of DTMF signaling. 

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: DTMFDETECTORENABLE"
       ::= {acIBSDetectors 7}



     acIBSDetectorsCallProgressEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of Call Progress Tones.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: CALLPROGRESSDETECTORENABLE"
       ::= {acIBSDetectors 8}



     acIBSDetectorsUserDefinedToneEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of User Defined Tones signaling.

0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: USERDEFINEDTONEDETECTORENABLE"
       ::= {acIBSDetectors 9}



     acIBSDetectorsDetectionRedirection OBJECT-TYPE
       SYNTAX INTEGER {
                  pcm(0)
,
                  network(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the IBS (In-Band Signaling) Detection Direction.


0 = PCM 
1 = Network.
Access: Online.
AC INI-Param: IBSDETECTIONREDIRECTION"
       ::= {acIBSDetectors 10}



     acIBSDetectorsSS4Enable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS4DETECTORENABLE"
       ::= {acIBSDetectors 11}



     acIBSDetectorsMFSS5Enable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables detection of MF SS5 line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFSS5DETECTORENABLE"
       ::= {acIBSDetectors 12}



     acIBSDetectorsSS5Enable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS5DETECTORENABLE"
       ::= {acIBSDetectors 13}



     acIBSDetectorsSITEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables SIT (Special Information Tone) detection
according to the ITU-T recommendation E.180/Q.35.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: SITDETECTORENABLE"
       ::= {acIBSDetectors 14}



     acIBSDetectorsCOTEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables Continuity Test tone detection and generation
according to the ITU-T Q.724 recommendation.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLECONTINUITYTONES"
       ::= {acIBSDetectors 15}



     acIBSDetectorsR1DetectionStandard OBJECT-TYPE
       SYNTAX INTEGER {
                  mfR1DetectionStandardItu (0)
,
                  mfR1DetectionStandardR15 (1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter determines which one of the R1 MF protocol flavors
will be used for detection.

0 = ITU
1 = R1.5.
Access: Offline.
AC INI-Param: R1DetectionStandard"
       ::= {acIBSDetectors 16}



     acIBSDetectorsUDTDetectorFrequencyDeviation OBJECT-TYPE
       SYNTAX Unsigned32 (1..50)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the deviation allowed for the detection of each signal
frequency. Units are in Hertz.
Valid values range 1-50.
Default value 50 Hz.
.
Access: Offline.
AC INI-Param: UDTDETECTORFREQUENCYDEVIATION"
       ::= {acIBSDetectors 17}



     acIBSDetectorsCPTDetectorFrequencyDeviation OBJECT-TYPE
       SYNTAX Unsigned32 (1..30)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the deviation allowed for the detection of each CPT
signal frequency. Units are in Hertz.
Valid values range 1-30.
Default value 10 Hz.
.
Access: Offline.
AC INI-Param: CPTDETECTORFREQUENCYDEVIATION"
       ::= {acIBSDetectors 18}



     acIPMediaConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 6}


     acIPMedia OBJECT IDENTIFIER ::= {acIPMediaConfig 1}


     acIPMediaDSPDetectorsEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables DSP IP Media Detectors. Enabling this parameter
might reduce the board channel capacity.

0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEDSPIPMDETECTORS"
       ::= {acIPMedia 1}



     acIPMediaEnableMCApplication OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables media control functionality.
Access: Offline.
AC INI-Param: ENABLEMEDIACONTROL"
       ::= {acIPMedia 2}



     acIPMAnswerDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 2}


     acIPMAnswerDetectorEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  no(0)
,
                  yes(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables activation of the AD (Answer Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEANSWERDETECTOR"
       ::= {acIPMAnswerDetector 1}



     acIPMAnswerDetectorActivityDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls (in 100 msec resolution) the time between sending Activation
command (AnswerDetector = 1) and the time that the
detector actually starts to work.
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORACTIVITYDELAY"
       ::= {acIPMAnswerDetector 2}



     acIPMAnswerDetectorSilenceTime OBJECT-TYPE
       SYNTAX Unsigned32 (0..128)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This parameter controls the silence time period (in 100 msec
resolution) from no speech input until the END_OF_SPEECH event
is sent.
10 = 1 second
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORSILENCETIME"
       ::= {acIPMAnswerDetector 3}



     acIPMAnswerDetectorRedirection OBJECT-TYPE
       SYNTAX INTEGER {
                  speechPCMSideDetected(0)
,
                  speechIPSideDetected(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AD (Answer Detector) Redirection. 
0 (PCM) = Speech from the PCM side is detected 
1 (Network) = Speech from the IP side is detected.
Access: Online.
AC INI-Param: ANSWERDETECTORREDIRECTION"
       ::= {acIPMAnswerDetector 4}



     acIPMAnswerDetectorSensitivity OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Controls the AD (Answer Detector) sensitivity.

The allowed values are different for different boards:
DSP Gen2-based products: range 0 - 2, default 0.
DSP Gen2-based products: range 0 - 7, default 3.

Lowest value matches highest sensitivity and vice versa.
Access: Online.
AC INI-Param: ANSWERDETECTORSENSITIVITY"
       ::= {acIPMAnswerDetector 5}



     acIPMEnergyDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 3}


     acIPMEnergyDetectorEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  no(0)
,
                  yes(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Activates the ED (Energy Detector). 
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEENERGYDETECTOR"
       ::= {acIPMEnergyDetector 1}



     acIPMEnergyDetectorQualityFactor OBJECT-TYPE
       SYNTAX Unsigned32 (0..10)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the ED's (Energy Detector's) sensitivity (0 -10).

0 = Insensitive
10 = Most Sensitive

Range = 0 to 10.
Access: Online.
AC INI-Param: ENERGYDETECTORQUALITYFACTOR"
       ::= {acIPMEnergyDetector 2}



     acIPMEnergyDetectorThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the ED's (Energy Detector's) threshold. A signal exceeding
the threshold invokes an 'Above' or 'Below' event. 
ActualThreshold = -44 dBm + (EDThreshold * 6)
Default = 3 = -26 dBm

Range: 0 to 7.
Access: Online.
AC INI-Param: ENERGYDETECTORTHRESHOLD"
       ::= {acIPMEnergyDetector 3}



     acIPMEnergyDetectorEnergyRedirection OBJECT-TYPE
       SYNTAX INTEGER {
                  tDM(0)
,
                  network(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Selects the direction of the energy detection.
0 = Detect from the TDM side
1 = Detect from the network side.
Access: Online.
AC INI-Param: ENERGYDETECTORREDIRECTION"
       ::= {acIPMEnergyDetector 4}



     acIPMediaPatternDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 4}


     acIPMediaPatternDetectorEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  no(0)
,
                  yes(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables activation of the PD (Pattern Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEPATTERNDETECTOR"
       ::= {acIPMediaPatternDetector 1}



     acIPMediaPatternDetectorDetectionThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the number of consecutive patterns to trigger the pattern
detection event.

Range = 0 to 31.
Access: Offline.
AC INI-Param: PDTHRESHOLD"
       ::= {acIPMediaPatternDetector 2}



     acIPMediaAMD OBJECT IDENTIFIER ::= {acIPMediaConfig 5}


     acIPMediaAMDDetectionDirection OBJECT-TYPE
       SYNTAX INTEGER {
                  acAmdTdmDetection(0)
,
                  acAmdNetworkDetection(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) detection direction.

One of the following values:

0 = Detection from the TDM side
1 = Detection from the Network side.
Access: Online.
AC INI-Param: AMDDETECTIONDIRECTION"
       ::= {acIPMediaAMD 1}



     acIPMediaAMDSensitivity OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) detection sensitivity:

0 = Best detection of an answering machine
7 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDDetectionSensitivity"
       ::= {acIPMediaAMD 2}



     acIPMediaAMDDetectionSensitivityHighResolution OBJECT-TYPE
       SYNTAX Unsigned32 (0..15)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) high resolution
detection sensitivity.
The high resolution has 16 levels of sensitivity while the
normal resolution (Answer Machine Detector Sensitivity) has
8 levels.

0 = Best detection of an answering machine
15 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDSensitivityLevel"
       ::= {acIPMediaAMD 3}



     acIPMediaAMDSensitivityResolution OBJECT-TYPE
       SYNTAX INTEGER {
                  normal(0)
,
                  high(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) detection sensitivity
resolution:

0 = Normal detection sensitivity resolution (8 sensitivity
levels)
1 = High detection sensitivity resolution (16 sensitivity levels).
Access: Online.
AC INI-Param: AMDSensitivityParameterSuit"
       ::= {acIPMediaAMD 4}



     acIPMediaAMDBeepDetectionTimeout OBJECT-TYPE
       SYNTAX Unsigned32 (0..1638)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) Beep detection
timeout.

Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds).
Access: Online.
AC INI-Param: AMDBeepDetectionTimeout"
       ::= {acIPMediaAMD 5}



     acIPMediaAMDBeepDetectionSensitivity OBJECT-TYPE
       SYNTAX Unsigned32 (0..3)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) Beep detection
sensitivity.

0 - Least sensitive.
3 - Most sensitive.
Access: Online.
AC INI-Param: AMDBeepDetectionSensitivity"
       ::= {acIPMediaAMD 6}



     acIPMediaAMDSensitivityParameterSuit OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the serial number of the AMD (Answer Machine Detector)
parameter suit:
0 = USA Parameter Suit with normal detection  sensitivity resolution
(8 sensitivity levels)
1 = USA Parameter Suit with high detection sensitivity resolution
(16 sensitivity levels)
2-7 : other countries parameter suits with up to 16 sensitivity
levels.
Access: Online.
AC INI-Param: AMDSensitivityParameterSuit"
       ::= {acIPMediaAMD 7}



     acIPMediaAMDSensitivityLevel OBJECT-TYPE
       SYNTAX Unsigned32 (0..15)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the AMD (Answer Machine Detector) level of detection
sensitivity.
It has 16 levels of sensitivity :
0 = Best detection of an answering machine
15 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDSensitivityLevel"
       ::= {acIPMediaAMD 8}



     acIPMConference OBJECT IDENTIFIER ::= {acIPMediaConfig 6}


     acIPMConferenceGASNMinInterval OBJECT-TYPE
       SYNTAX Unsigned32 (10..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Minimum interval between Active Speaker Notification (ASN) events.
An ASN event reports on the active speakers in a conference.
The event is issued whenever the active speakers change.
units = 100 ms
Minimum configurable interval between events is 500 ms (5 units).
Access: Instant.
AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL"
       ::= {acIPMConference 1}



     acIPMConferenceEnergythreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..39)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Conference -  Minimum energy level for a user to be included
in Active Speaker Notification (ASN) events (units: -dBm).

Valid range 0 to (-39) dbm.
Access: Instant.
AC INI-Param: ActiveSpeakerEnergyThreshold"
       ::= {acIPMConference 2}



     acIPMConferenceEnableHDConference OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enable\Disable HD Conference.
Access: Offline.
AC INI-Param: EnableHDConference"
       ::= {acIPMConference 3}



     acIPMVideoConference OBJECT IDENTIFIER ::= {acIPMediaConfig 7}


     acIPMVideoConferenceSwitchingInterval OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the video view rotation interval in seconds. Applicable
when using timer trigger switching mode.
Access: Online.
AC INI-Param: VideoConferenceSwitchingInterval"
       ::= {acIPMVideoConference 1}



     acIPMVideoConferenceEnableActiveSpeakerHighlight OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Highlights the speaker for participants viewing a symmetric
layout (2x2 or 3x3) .
0 - Don't highlight active speaker.
1 - Highlight active speaker.
Access: Online.
AC INI-Param: VideoEnableActiveSpeakerHighlight"
       ::= {acIPMVideoConference 2}



     acIPMVideoConferenceParticipantType OBJECT-TYPE
       SYNTAX INTEGER {
                  regular(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates a participant's capabilities in the conference.
Regular (2)  Regular participant who is able to both send
and receive video.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantType"
       ::= {acIPMVideoConference 3}



     acIPMVideoConferenceParticipantTriggerMode OBJECT-TYPE
       SYNTAX INTEGER {
                  triggerMode-Speaker(0)
,
                  triggerMode-Timer(1)
,
                  triggerMode-Fixed(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Participant trigger mode defines the trigger for modifying the
participant's view.
Voice Activated Video Switch (0)  A participants view will
be changed according to the active speakers detection. 
Timer (1)  A participants view is rotated every configured
time among the different video participants in the conference.
Fixed (3)  A participants view is fixed.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantTriggerMode"
       ::= {acIPMVideoConference 4}



     acIPMVideoConferenceParticipantLayout OBJECT-TYPE
       SYNTAX INTEGER {
                  layout-1XUSER(0)
,
                  layout-2x2-USERS(1)
,
                  layout-3x3-USERS(2)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates the participant's view layout.
1 user (0).
2*2 users (1). All same size.
3*3 users (2). All same size.


.
Access: Online.
AC INI-Param: VideoConferenceParticipantLayout"
       ::= {acIPMVideoConference 5}



     acIPMVideoConferenceEnableConferenceParticipantSelfView OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Self view indication.
0 - The participant cannot view himself
1 - The participant can view himself.
Access: Online.
AC INI-Param: VideoEnableConferenceParticipantSelfView"
       ::= {acIPMVideoConference 6}



     acMediaCallerIDConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 7}


     acCallerID OBJECT IDENTIFIER ::= {acMediaCallerIDConfig 1}


     acCallerIDTypes OBJECT-TYPE
       SYNTAX INTEGER {
                  bellcore (0)
,
                  eTSI (1)
,
                  nTT (2)
,
                  bT (4)
,
                  dTMF-Based-ETSI (16)
,
                  denmark (17)
,
                  indian (18)
,
                  brazilian (19)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the supported Caller ID standard.
0 = Bellcore
1 = ETSI
2 = NTT
4 = British
16 = ETSI_ETS
17 = Denmark
18 = Indian
19 = Brazilian.
Access: Online.
AC INI-Param: CALLERIDTYPE"
       ::= {acCallerID 1}



     acCallerIDTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  callerID-DISABLE(0)
,
                  callerID-RELAY(1)
,
                  callerID-MUTE(3)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the CallerID Transport type.

0 = Disable 
1 = Relay 
3 = Mute.
Access: Online.
AC INI-Param: CallerIDTransportType"
       ::= {acCallerID 2}



     acCallerIDDTMFBasedMaxDigits OBJECT-TYPE
       SYNTAX Unsigned32 (0..26)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the maximum number of DTMF digits in a DTMF-based
Caller ID string.

Range = 0 to 26.
Access: Online.
AC INI-Param: MAXDTMFDIGITSINCIDSTRING"
       ::= {acCallerID 3}



     acCallerIDDTMFBasedMinDigits OBJECT-TYPE
       SYNTAX Unsigned32 (0..26)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the mimumum number of DTMF digits in a DTMF-based
Caller ID string.

Range = 0 to 26.
Access: Online.
AC INI-Param: MINDTMFDIGITSINCIDSTRING"
       ::= {acCallerID 4}



     acCallerIDNTTDIDSignallingForm OBJECT-TYPE
       SYNTAX INTEGER {
                  nttDidFskSignalling (0)
,
                  nttDidDtmfBasedSignalling (1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Configures the signalling format used when generating an NTT
DID.

0 = FSK Siganl
1 = DTMF Based Signal.
Access: Online.
AC INI-Param: NTTDIDSignallingForm"
       ::= {acCallerID 5}



     acMediaNetworkConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 8}


     acMediaNetwork OBJECT IDENTIFIER ::= {acMediaNetworkConfig 1}


     acMediaNetworkDisableNAT OBJECT-TYPE
       SYNTAX INTEGER {
                  no(0)
,
                  yes(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enables or disables the NAT feature.
0 = Do not disable NAT
1 = Disable NAT.
Access: Online.
AC INI-Param: DISABLENAT"
       ::= {acMediaNetwork 1}



     acMediaNetworkRtpIpTos OBJECT-TYPE
       SYNTAX Unsigned32 (0..15)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets value of IP Type Of Service field in IP header for all
packets generated from this channel. Follow the acTIPTOS enumeration.
Access: Instant.
AC INI-Param: IPTOS"
       ::= {acMediaNetwork 2}



     acMediaNetworkRtpIpPrecedence OBJECT-TYPE
       SYNTAX Unsigned32 (0..7)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Sets value of the IP precedence field in the IP header for all
packets generated from this channel. Follow the acTIPPrecedence
enumeration.
Access: Instant.
AC INI-Param: IPPRECEDENCE"
       ::= {acMediaNetwork 3}



     acMediaNetworkIPDiffServ OBJECT-TYPE
       SYNTAX Unsigned32 (0..63)
       MAX-ACCESS read-write
       STATUS deprecated
       DESCRIPTION
           "Defines the value of the 'DiffServ' field in the IP header for
media (RTP) traffic.

Range: 0 to 63.
Access: Instant.
AC INI-Param: IPDIFFSERV"
       ::= {acMediaNetwork 4}



     acMediaNetworkInboundLatchMode OBJECT-TYPE
       SYNTAX INTEGER {
                  strict(0)
,
                  dynamic(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines the way of handling incoming  media packets from
non-expected address/port.
Access: Online.
AC INI-Param: InboundMediaLatchMode"
       ::= {acMediaNetwork 5}



     acMediaJBConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 9}


     acJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 1}


     acJitterBufferMinDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..150)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the Dynamic Jitter Buffer Minimum Delay (in msec).

Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFMINDELAY"
       ::= {acJitterBuffer 1}



     acJitterBufferOptFactor OBJECT-TYPE
       SYNTAX Unsigned32 (0..13)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the Dynamic Jitter Buffer frame error/delay optimization.
Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFOPTFACTOR"
       ::= {acJitterBuffer 2}



     acVideoJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 2}


     acVideoJitterBufferMinDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..500)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Jitter buffer minimum delay in milliseconds. Must be less than
JitterBufferMaxDelay.
Access: Online.
AC INI-Param: VideoJitterBufferMinDelay"
       ::= {acVideoJitterBuffer 1}



     acVideoJitterBufferMaxDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..500)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Jitter buffer maximum delay in milliseconds.
Access: Online.
AC INI-Param: VideoJitterBufferMaxDelay"
       ::= {acVideoJitterBuffer 2}



     acVideoJitterBufferDJBOptimizationFactor OBJECT-TYPE
       SYNTAX Unsigned32 (0..10)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "JB Optimization Factor controls the jitter buffer's adaptation
rates
 A High factor means fast adaptation when jitter increases,
and a slow adaptation when jitter decrease. 
Small factor means slow adaptation when jitter increases, and
a fast adaptation when jitter decreases.   
.
Access: Online.
AC INI-Param: VideoDJBOptimizationFactor"
       ::= {acVideoJitterBuffer 3}



     acMediaStatus OBJECT IDENTIFIER ::= {acMedia 2}


     acMediaAggregation OBJECT IDENTIFIER ::= {acMediaConfiguration 10}


     acMediaAggregationRemoteBaseUDPPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Remote Base UDP Port For Aggrigation.
Access: Offline.
AC INI-Param: REMOTEBASEUDPPORT"
       ::= {acMediaAggregation 1}



     acMediaAggregationL1L1ComplexRxUDPPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The UDP port for the incoming (from the remote side) and the
outgoing (destination UDP) packets, for Complex Multiplexed
RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexRxUDPPort"
       ::= {acMediaAggregation 2}



     acMediaAggregationL1L1ComplexTxUDPPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "The Source UDP port for the outgoing UDP Multiplexed RTP packets,
for Complex-Multiplex RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexTxUDPPort"
       ::= {acMediaAggregation 3}



     acIPLegs OBJECT IDENTIFIER ::= {acMediaStatus 1}


     -- ****************************************
     -- acIPLegs table declaration
     -- ****************************************
     acIPLegsTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcIPLegsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       ::= {acIPLegs 1}



     -- ****************************************
     -- acIPLegs table entry
     -- ****************************************
     acIPLegsEntry OBJECT-TYPE
       SYNTAX AcIPLegsEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acIPLegsLegIndex}
       ::= {acIPLegsTable 1}



     -- ****************************************
     -- acIPLegs TABLE
     -- ****************************************
     AcIPLegsEntry ::= SEQUENCE {
       acIPLegsLegIndex                                Unsigned32,
       acIPLegsCallIndex                               Unsigned32,
       acIPLegsRTPActive                               INTEGER,
       acIPLegsCoderType                               INTEGER,
       acIPLegsSilenceCompression                      INTEGER,
       acIPLegsDTMFDetection                           INTEGER,
       acIPLegsLocalRTPPort                            Unsigned32,
       acIPLegsRemoteRTPAddress                        IpAddress,
       acIPLegsFaxTransportType                        INTEGER,
       acIPLegsRxPackets                               Unsigned32,
       acIPLegsTxPackets                               Unsigned32,
       acIPLegsRxBytes                                 Unsigned32,
       acIPLegsTxBytes                                 Unsigned32,
       acIPLegsJitter                                  Unsigned32,
       acIPLegsPacketLoss                              Unsigned32,
       acIPLegsSSRCOfSender                            Unsigned32,
       acIPLegsDSPDevice                               Unsigned32,
       acIPLegsLegName                                 SnmpAdminString
     }



     acIPLegsLegIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5000)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Describes Rtp Endpoint In A Specific Call.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 1}



     acIPLegsCallIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Decribes The Call which The Rtp EndPoint Participant In It.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 2}



     acIPLegsRTPActive OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Decribes whether the RTP is active or not.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 3}



     acIPLegsCoderType OBJECT-TYPE
       SYNTAX INTEGER {
                  acG711Alaw-64(0)
,
                  acG711Mulaw(1)
,
                  acG726-16(2)
,
                  acG726-24(3)
,
                  acG726-32 (4)
,
                  acG726-40(5)
,
                  acG727-16(6)
,
                  acG727-24-16(7)
,
                  acG727-24(8)
,
                  acG727-32-16(9)
,
                  acG727-32-24(10)
,
                  acG727-32(11)
,
                  acG727-40-16(12)
,
                  acG727-40-24(13)
,
                  acG727-40-32(14)
,
                  acG723Low(15)
,
                  acG723High(16)
,
                  acG729(17)
,
                  acGSM610(18)
,
                  vacGSM610MS(20)
,
                  acGSM-EFR(21)
,
                  acTransparent(22)
,
                  acG728(23)
,
                  acNetCoder-4-8(25)
,
                  acNetCoder-5-6(26)
,
                  acNetCoder-6-4(27)
,
                  acNetCoder-7-2(28)
,
                  acNetCoder-8(29)
,
                  acNetCoder-8-8(30)
,
                  acNetCoder-9-(31)
,
                  acEVRC(32)
,
                  acEVRC-TFO(33)
,
                  acQCELP-8(34)
,
                  acQCELP-8-TFO(35)
,
                  acQCELP-13(36)
,
                  acQCELP-13-TFO(37)
,
                  acEVRC-TTY(38)
,
                  acNoCoder(40)
,
                  acModemAnswer(41)
,
                  acModemCall(42)
,
                  acVoxADPCM(43)
,
                  acG711Alaw-5-5(45)
,
                  acG711Mulaw-5-5(46)
,
                  acG726-32-5-5(47)
,
                  acG729E(48)
,
                  acLinearPCM(49)
,
                  acAMR-4-7(50)
,
                  acAMR-5-15(51)
,
                  acAMR-5-9(52)
,
                  acAMR-6-7(53)
,
                  acAMR-7-4(54)
,
                  acAMR-7-95(55)
,
                  acAMR-10-2(56)
,
                  acAMR-12-2(57)
,
                  acEVRC-B(58)
,
                  acEVRC-TFOV(60)
,
                  acQCELP-8-TFOV(61)
,
                  acQCELP-13-TFOV(62)
,
                  acILBC-15(63)
,
                  acILBC-13(64)
,
                  acBV-16(65)
,
                  acAMRWB-6-6(66)
,
                  acAMRWB-8-85(67)
,
                  acAMRWB-12-65(68)
,
                  acAMRWB-14-25(69)
,
                  acAMRWB-15-85(70)
,
                  acAMRWB-18-25(71)
,
                  acAMRWB-19-85(72)
,
                  acAMRWB-23-05(73)
,
                  acAMRWB-23-85(74)
,
                  acG722-48K(75)
,
                  acG722-56K(76)
,
                   acG722-64K(77)
,
                  acDPNSSCoder(78)
,
                  acEG711Alaw-10ms(80)
,
                  acEG711Alaw-20ms(81)
,
                  acEG711Alaw-30ms(82)
,
                  acEG711Mulaw-10ms(83)
,
                  acEG711Mulaw-20ms(84)
,
                  acEG711Mulaw-30ms(85)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "describes the coder Type.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 4}



     acIPLegsSilenceCompression OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Enables or Disables the Silence Compression.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 5}



     acIPLegsDTMFDetection OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Enables or Disables the DTMF Detection.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 6}



     acIPLegsLocalRTPPort OBJECT-TYPE
       SYNTAX Unsigned32 (0..20000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the RTP port of the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 7}



     acIPLegsRemoteRTPAddress OBJECT-TYPE
       SYNTAX IpAddress
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the RTP address.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 8}



     acIPLegsFaxTransportType OBJECT-TYPE
       SYNTAX INTEGER {
                  transparent(0)
,
                  relay(1)
,
                  bypass(2)
,
                  withevents(3)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Fax transfor Type currently working.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 9}



     acIPLegsRxPackets OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the received packets on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 10}



     acIPLegsTxPackets OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Transmitted  packets on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 11}



     acIPLegsRxBytes OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the received Bytes on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 12}



     acIPLegsTxBytes OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Transmitted packets on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 13}



     acIPLegsJitter OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Jitter on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 14}



     acIPLegsPacketLoss OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Lost packets on the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 15}



     acIPLegsSSRCOfSender OBJECT-TYPE
       SYNTAX Unsigned32 (0..2147483647)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the SSRC Of the Sender.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 16}



     acIPLegsDSPDevice OBJECT-TYPE
       SYNTAX Unsigned32 (0..2000)
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the DSP Device Of the Leg.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 17}



     acIPLegsLegName OBJECT-TYPE
       SYNTAX SnmpAdminString (SIZE (0..64))
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A"
       ::= {acIPLegsEntry 18}



     acStreamingCache OBJECT IDENTIFIER ::= {acMediaConfiguration 11}


     acStreamingCacheSize OBJECT-TYPE
       SYNTAX Unsigned32 (0..32)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the streaming cache size in MBs.
The remaining size (out of 32MBs) is used as VoicePrompt storage.
Access: Offline.
AC INI-Param: gStreamingCacheSize"
       ::= {acStreamingCache 1}



     acStreamingCacheRefreshTime OBJECT-TYPE
       SYNTAX Integer32 (-1..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Defines the streaming cache data refresh time in minutes. If
-1 is set, refresh is off.
Access: Offline.
AC INI-Param: gStreamingCacheRefreshTime"
       ::= {acStreamingCache 2}



     acStreamingCacheClearService OBJECT-TYPE
       SYNTAX Unsigned32 (1..2)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "reset the streaming cache.
Access: Instant.
AC INI-Param: N/A"
       ::= {acStreamingCache 3}



     acMediaVideoConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 12}


     acMediaVideoConfigEncoderIntraInterval OBJECT-TYPE
       SYNTAX Unsigned32 (0..65535)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the frequency for the number of frames at which the encoder
outputs an Intra frame.
Access: Online.
AC INI-Param: VideoEncoderIntraInterval"
       ::= {acMediaVideoConfig 1}



     acMediaVideoConfigMaxPacketSize OBJECT-TYPE
       SYNTAX Unsigned32 (1..1400)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the maximum packet size in bytes.
Access: Online.
AC INI-Param: VideoMaxPacketSize"
       ::= {acMediaVideoConfig 2}



     acMediaVideoConfigTargetBitrate OBJECT-TYPE
       SYNTAX Unsigned32 (1..384)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets the target output bit rate.
Access: Online.
AC INI-Param: VideoTargetBitrate"
       ::= {acMediaVideoConfig 3}



     acMediaVideoConfigQualityParameterForRateControl OBJECT-TYPE
       SYNTAX Unsigned32 (0..31)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This value determines the trade off between video quality and
frame rate. A low value indicates a higher quality with a
lower frame rate and vice versa.
Access: Online.
AC INI-Param: VideoQualityParameterForRateControl"
       ::= {acMediaVideoConfig 4}



     acMediaVideoConfigRateControlType OBJECT-TYPE
       SYNTAX INTEGER {
                  ceVideoConstantBitRate (0)
,
                  ceVideoVaribleBitRate(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Sets bitrate output to either a constant or a variable bit rate.

CBR (0)  Constant Bit Rate.
VBR (1)  Variable Bit Rate. Target Bitrate indicates the target
average output bit rate. 
.
Access: Online.
AC INI-Param: VideoRateControlType"
       ::= {acMediaVideoConfig 5}



     acMediaVideoConfigEnableReSyncHeader OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Indicates whether to add a video packet header to every packet
in order to increase error resilience.
0 - Disable
1 - Enable.
Access: Online.
AC INI-Param: VideoEnableReSyncHeader"
       ::= {acMediaVideoConfig 6}



     acMediaVideoConfigEnableAudioVideoSynchronization OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Determines whether to enable audio and video synchronization.
0 - No synchronization between audio and video streams
1 - Synchronization between audio and video streams

.
Access: Online.
AC INI-Param: EnableAudioVideoSynchronization"
       ::= {acMediaVideoConfig 7}



     acIPMediaChannels OBJECT IDENTIFIER ::= {acMediaConfiguration 13}


     acIPMediaChannelsEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Whether to enable DSP channels reservation for IPmedia support.
Relevant for Mediant 1000 board only. One of the following
possible 

0 = Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableIPMediaChannels"
       ::= {acIPMediaChannels 1}



     -- ****************************************
     -- acIPMediaChannelsResources table declaration
     -- ****************************************
     acIPMediaChannelsResourcesTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AcIPMediaChannelsResourcesEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "IPMedia channels info"
       ::= {acIPMediaChannels 21}



     -- ****************************************
     -- acIPMediaChannelsResources table entry
     -- ****************************************
     acIPMediaChannelsResourcesEntry OBJECT-TYPE
       SYNTAX AcIPMediaChannelsResourcesEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           ""
       INDEX {acIPMediaChannelsResourcesIndex}
       ::= {acIPMediaChannelsResourcesTable 1}



     -- ****************************************
     -- acIPMediaChannelsResources TABLE
     -- ****************************************
     AcIPMediaChannelsResourcesEntry ::= SEQUENCE {
       acIPMediaChannelsResourcesIndex                 Unsigned32,
       acIPMediaChannelsResourcesRowStatus             RowStatus,
       acIPMediaChannelsResourcesAction                INTEGER,
       acIPMediaChannelsResourcesActionRes             INTEGER,
       acIPMediaChannelsResourcesModuleID              Unsigned32,
       acIPMediaChannelsResourcesDSPChannelsReserved   Unsigned32
     }



     acIPMediaChannelsResourcesIndex OBJECT-TYPE
       SYNTAX Unsigned32 (0..5)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "Index Field for line. Internal parameter.
AC INI-Param: IPMediaChannels_Index"
       ::= {acIPMediaChannelsResourcesEntry 1}



     acIPMediaChannelsResourcesRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A"
       ::= {acIPMediaChannelsResourcesEntry 2}



     acIPMediaChannelsResourcesAction OBJECT-TYPE
       SYNTAX INTEGER {
                  none(0)

                  }
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A"
       ::= {acIPMediaChannelsResourcesEntry 3}



     acIPMediaChannelsResourcesActionRes OBJECT-TYPE
       SYNTAX INTEGER {
                  succeeded(0)

                  }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
           "Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A"
       ::= {acIPMediaChannelsResourcesEntry 4}



     acIPMediaChannelsResourcesModuleID OBJECT-TYPE
       SYNTAX Unsigned32 (0..6)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "Refers to M1K board only, module at which slot.
Access: Offline.
AC INI-Param: IPMediaChannels_ModuleID"
       ::= {acIPMediaChannelsResourcesEntry 5}



     acIPMediaChannelsResourcesDSPChannelsReserved OBJECT-TYPE
       SYNTAX Unsigned32 (0..10000)
       MAX-ACCESS read-create
       STATUS current
       DESCRIPTION
           "How many DSP channels reserve for IPMedia channels.
Access: Offline.
AC INI-Param: IPMediaChannels_DSPChannelsReserved"
       ::= {acIPMediaChannelsResourcesEntry 6}



     acAcousticEchoSuppressor OBJECT IDENTIFIER ::= {acMediaConfiguration 14}


     acAcousticEchoSuppressorEnable OBJECT-TYPE
       SYNTAX INTEGER {
                  disable(0)
,
                  enable(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Enable support of network echo suppressor on board level. Reduces
board resource capacity.
Access: Offline.
AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT"
       ::= {acAcousticEchoSuppressor 1}



     acAcousticEchoSuppressorEchoCancellerType OBJECT-TYPE
       SYNTAX INTEGER {
                  lineEchoCanceller(0)
,
                  acousticEchoSuppressorNetwork(1)

                  }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Echo Canceller type. Line echo canceller for TDM Side or acoustic
echo suppressor on network side.
Access: Online.
AC INI-Param: ECHOCANCELLERTYPE"
       ::= {acAcousticEchoSuppressor 2}



     acAcousticEchoSuppressorAttenuationIntensity OBJECT-TYPE
       SYNTAX Unsigned32 (0..3)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Acoustic echo suppressor attenuation intensity. intensity of
attenuation on signals identified as echo.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY"
       ::= {acAcousticEchoSuppressor 3}



     acAcousticEchoSuppressorMaxERLThreshold OBJECT-TYPE
       SYNTAX Unsigned32 (0..60)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Acoustic echo suppressor max ERL threshold in DB. Max ratio
between signal level and retruned echo from phone.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD"
       ::= {acAcousticEchoSuppressor 4}



     acAcousticEchoSuppressorMinReferenceDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..40)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Acoustic echo suppressor MIN reference delay in mSec. The reference
delay in the network helps echo suppression algorithm
to identify echo signals. The entered value will be multiplied
by 10.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS"
       ::= {acAcousticEchoSuppressor 5}



     acAcousticEchoSuppressorMaxReferenceDelay OBJECT-TYPE
       SYNTAX Unsigned32 (0..40)
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "Acoustic echo suppressor MAX reference delay. The reference
delay in the network helps echo suppression algorithm to identify
echo signals. The entered value will be multiplied by
10.
Access: Online.
AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS"
       ::= {acAcousticEchoSuppressor 6}





END
