Package: locales-all
Multi-Arch: foreign
Priority: extra
Section: localization
Installed-Size: 107972
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: eglibc
Version: 2.13-38+deb7u8
Provides: locales
Depends: glibc-2.13-1
Breaks: locales (<< 2.13-17)
Size: 3069774
Description: Embedded GNU C Library: Precompiled locale data
 This package contains the precompiled locale data for all supported locales.
 A better alternative is to install the locales package and only select
 desired locales, but it can be useful on a low-memory machine because some
 locale files take a lot of memory to be compiled.
Homepage: http://www.eglibc.org

Package: libtext-wrapi18n-perl
Priority: required
Section: perl
Installed-Size: 28
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Size: 9004
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: libustr-1.0-1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 270
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: i386
Source: ustr
Version: 1.0.4-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 90394
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: fonts-freefont-ttf
Priority: optional
Section: fonts
Installed-Size: 10720
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Source: fonts-freefont
Version: 20120503-1
Replaces: ttf-freefont (<< 20120503-1)
Provides: ttf-freefont
Breaks: ttf-freefont (<< 20120503-1)
Size: 6024292
Description: Freefont Serif, Sans and Mono Truetype fonts
 Freefont is a set of free high-quality TrueType fonts covering the UCS
 character set. These fonts are similar to the widely known Helvetica,
 Times and Courier fonts.
Homepage: http://savannah.gnu.org/projects/freefont/

Package: debconf
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 625
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.5.49
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Size: 171018
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: libasprintf0c2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 62
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: gettext
Version: 0.18.1.1-9
Replaces: gettext-base (<< 0.18.1.1-6)
Depends: libc6 (>= 2.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Pre-Depends: multiarch-support
Breaks: gettext-base (<< 0.18.1.1-6)
Size: 26690
Description: GNU library to use fprintf and friends in C++
 This package contains the libasprintf shared library which makes the
 C formatted output routines (fprintf et al.) usable in C++ programs,
 for use with the <string> strings and the <iostream> streams.
Homepage: http://www.gnu.org/software/gettext/

Package: libelf1
Priority: optional
Section: libs
Installed-Size: 1006
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: i386
Source: elfutils
Version: 0.152-1+wheezy1
Depends: libc6 (>= 2.3)
Size: 301312
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://fedorahosted.org/elfutils/

Package: dash
Essential: yes
Priority: required
Section: shells
Installed-Size: 202
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: i386
Version: 0.5.7-3
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.4)
Size: 109462
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: mktemp
Priority: extra
Section: oldlibs
Installed-Size: 39
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 8.13-3.5
Pre-Depends: coreutils (>= 7.4-1)
Size: 16328
Description: coreutils mktemp transitional package
 Empty package to facilitate upgrades, can be safely removed.

Package: libnl-3-200
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: i386
Source: libnl3
Version: 3.2.7-4
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 57824
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://people.suug.ch/~tgr/libnl/

Package: coreutils
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 14026
Maintainer: Michael Stone <mstone@debian.org>
Architecture: i386
Version: 8.13-3.5
Replaces: mktemp, timeout
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.7), libselinux1 (>= 1.32)
Conflicts: timeout
Size: 5518018
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc od
 paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon
 sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test
 timeout touch tr true truncate tsort tty uname unexpand uniq unlink
 users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: sudo
Priority: optional
Section: admin
Installed-Size: 1586
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.8.5p2-1+nmu2
Replaces: sudo-ldap
Depends: libc6 (>= 2.11), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules
Conflicts: sudo-ldap
Size: 836432
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.

Package: libfreetype6
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 787
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: freetype
Version: 2.4.9-1.1+deb7u1
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Size: 453632
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org

Package: debianutils
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 212
Maintainer: Clint Adams <clint@debian.org>
Architecture: i386
Version: 4.3.2
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.7)
Size: 79654
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libsysfs2
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Source: sysfsutils
Version: 2.1.0+repack-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 31616
Description: interface library to sysfs
 Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
 tree of system devices. libsysfs provides a stable programming
 interface to sysfs and eases querying system devices and their
 attributes.
 .
 The package sysfsutils contains frontend programs that use this
 library. Development files and C examples are provided by the package
 libsysfs-dev.

Package: samba
Priority: optional
Section: net
Installed-Size: 22752
Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Architecture: i386
Version: 2:3.6.6-6+deb7u5
Replaces: samba-common (<= 2.0.5a-2)
Depends: samba-common (= 2:3.6.6-6+deb7u5), libwbclient0 (= 2:3.6.6-6+deb7u5), libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.11), libcap2 (>= 2.10), libcomerr2 (>= 1.01), libcups2 (>= 1.4.0), libgssapi-krb5-2 (>= 1.10+dfsg~), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.10+dfsg~), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpopt0 (>= 1.14), libtalloc2 (>= 2.0.4~git20101213), libtdb1 (>= 1.2.7+git20101214), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, libpam-runtime (>= 1.0.1-11), libpam-modules, lsb-base (>= 3.2-13), procps, update-inetd, adduser
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: logrotate, tdb-tools
Suggests: openbsd-inetd | inet-superserver, smbldap-tools, ldb-tools, ctdb
Conflicts: samba4 (<< 4.0.0~alpha6-2)
Size: 4299586
Description: SMB/CIFS file, print, and login server for Unix
 Samba is an implementation of the SMB/CIFS protocol for Unix systems,
 providing support for cross-platform file and printer sharing with
 Microsoft Windows, OS X, and other Unix systems.  Samba can also function
 as an NT4-style domain controller, and can integrate with both NT4 domains
 and Active Directory realms as a member server.
 .
 This package provides the components necessary to use Samba as a
 stand-alone file and print server.  For use in an NT4 domain or Active
 Directory realm, you will also need the winbind package.
 .
 This package is not required for connecting to existing SMB/CIFS servers
 (see smbclient) or for mounting remote filesystems (see cifs-utils).
Homepage: http://www.samba.org

Package: finger
Priority: optional
Section: net
Installed-Size: 66
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: bsd-finger
Version: 0.17-15
Replaces: netstd
Depends: libc6 (>= 2.4)
Size: 20182
Description: user information lookup program
 finger displays information about the system users.

Package: initramfs-tools
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 323
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Version: 0.109.1
Provides: linux-initramfs-tool
Depends: klibc-utils (>= 2.0-1~), cpio, kmod | module-init-tools, udev
Recommends: busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.1.0-2.1), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), s390-tools (<< 1.8.3-2~)
Conflicts: usplash (<< 0.5.50)
Size: 91274
Description: generic modular initramfs generator
 This package contains tools to create a bootable initramfs for Linux kernel
 packages. The initramfs is a compressed cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.

Package: makedev
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Version: 2.3.1-92
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Size: 42324
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.

Package: libxml2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1684
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: i386
Version: 2.8.0+dfsg1-7+wheezy4
Depends: libc6 (>= 2.7), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Pre-Depends: multiarch-support
Recommends: xml-core
Size: 893140
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org/

Package: expat
Priority: optional
Section: text
Installed-Size: 37
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: i386
Version: 2.1.0-1+deb7u1
Depends: libc6 (>= 2.3.4), libexpat1 (>= 2.0.1)
Size: 25466
Description: XML parsing C library - example application
 This package contains xmlwf, an example application of expat, the C
 library for parsing XML.  The arguments to xmlwf are one or more
 files which are each to be checked for XML well-formedness.
Homepage: http://expat.sourceforge.net

Package: telnet
Priority: standard
Section: net
Installed-Size: 144
Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Architecture: i386
Source: netkit-telnet
Version: 0.17-36
Replaces: netstd
Provides: telnet-client
Depends: netbase, libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.1.1)
Size: 65774
Description: The telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.

Package: login
Essential: yes
Priority: required
Section: admin
Installed-Size: 2711
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.1.5.1-1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Size: 983766
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: gpgv
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 401
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Source: gnupg
Version: 1.4.12-7+deb7u7
Depends: libbz2-1.0, libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Size: 221686
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org

Package: libssl1.0.0
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 7003
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Source: openssl
Version: 1.0.1e-2+deb7u17
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Size: 3044026
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: openssl-blacklist
Priority: optional
Section: net
Installed-Size: 12216
Maintainer: Kees Cook <kees@debian.org>
Architecture: all
Version: 0.5-3
Depends: python, openssl (>= 0.9.8g-9)
Pre-Depends: dpkg (>= 1.10.24)
Size: 6338006
Description: Blacklists for  OpenSSL RSA keys and tools
 This package contains the openssl-vulnkey tool and the common lists of
 known-bad OpenSSL keys to use when examining suspect keys with
 openssl-vulnkey.
 .
 RSA-1024, RSA-2048

Package: libdbus-1-3
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 356
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: dbus
Version: 1.6.8-1+deb7u6
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Size: 176308
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libperl5.14
Priority: optional
Section: libs
Installed-Size: 1573
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: i386
Source: perl
Version: 5.14.2-21+deb7u2
Replaces: perl-base (<= 5.8.7-4)
Depends: libc6 (>= 2.11), perl-base (= 5.14.2-21+deb7u2)
Size: 732448
Description: shared Perl library
 This package is required by programs which embed a Perl interpreter to
 ensure that the correct version of `perl-base' is installed.  It
 additionally contains the shared Perl library on architectures where the
 perl binary is linked to libperl.a (currently only i386, for performance
 reasons).  In other cases the actual library is in the `perl-base' package.
Homepage: http://dev.perl.org/perl5/

Package: gettext-base
Priority: standard
Section: utils
Installed-Size: 865
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: gettext
Version: 0.18.1.1-9
Depends: libc6 (>= 2.4), libasprintf0c2 (>= 0.18.1.1-6)
Size: 131048
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/

Package: module-init-tools
Priority: extra
Section: admin
Installed-Size: 31
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Source: kmod
Version: 9-3
Depends: libkmod2, kmod
Pre-Depends: dpkg (>= 1.15.7.2)
Size: 1796
Description: transitional dummy package (module-init-tools to kmod)
 This dummy package is provided to support the transition from
 module-init-tools to kmod and should be removed afterwards.

Package: libffi5
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: libffi
Version: 3.0.10-3
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Size: 20952
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: man-db
Multi-Arch: foreign
Priority: important
Section: doc
Installed-Size: 2210
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 2.6.2-1
Replaces: man, manpages-de (<< 0.5-4), nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, dpkg (>= 1.9.0), libc6 (>= 2.11), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Suggests: groff, less, www-browser
Conflicts: man, suidmanager (<< 0.50)
Size: 1054770
Description: on-line manual pager
 This package provides the man command, the primary way of examining the
 on-line help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: http://man-db.nongnu.org/

Package: libgdbm3
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 105
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: gdbm
Version: 1.8.3-11
Depends: libc6 (>= 2.1.3), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Size: 46646
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: sharutils
Priority: optional
Section: utils
Installed-Size: 870
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 1:4.11.1-1
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Suggests: bsd-mailx | mailx
Conflicts: shar, uuencode
Size: 199620
Description: shar, unshar, uuencode, uudecode
 `shar' makes so-called shell archives out of many files, preparing
 them for transmission by electronic mail services.  `unshar' helps
 unpacking shell archives after reception.  Other related utility
 programs help with other tasks.
 .
 `uuencode' prepares a file for transmission over an electronic
 channel which ignores or otherwise mangles the eight bit (high
 order bit) of bytes.  `uudecode' does the converse transformation.
Homepage: http://www.gnu.org/software/sharutils/

Package: libgcrypt11
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 611
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Version: 1.5.0-5+deb7u3
Depends: libc6 (>= 2.4), libgpg-error0 (>= 1.10)
Pre-Depends: multiarch-support
Suggests: rng-tools
Breaks: gnupg2 (<< 2.0.17-2ubuntu2), gpgsm (<< 2.0.17-2ubuntu2), libgnutls26 (<< 2.12.7-3)
Size: 301520
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger,
 Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libbind9-80
Priority: standard
Section: libs
Installed-Size: 101
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libdns88, libisc84, libisccfg82, libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Size: 42422
Description: BIND9 Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libbind9 shared library used by BIND's daemons and
 clients.

Package: isc-dhcp-common
Priority: important
Section: net
Installed-Size: 1855
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: i386
Source: isc-dhcp
Version: 4.2.2.dfsg.1-5+deb70u6
Replaces: dhcp3-common
Provides: dhcp3-common
Depends: libc6 (>= 2.4), debianutils (>= 2.8.2)
Size: 851992
Description: common files used by all the isc-dhcp* packages
 This package contains the files used by all the packages from ISC
 DHCP.

Package: lzma
Priority: optional
Section: utils
Installed-Size: 141
Maintainer: Mohammed Adnène Trojette <adn+deb@diwi.org>
Architecture: i386
Version: 9.22-2
Depends: libc6 (>= 2.3), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Conflicts: xz-lzma (<< 5.1.1alpha+20110809-2)
Size: 56640
Description: Compression and decompression in the LZMA format - command line utility
 The Lempel-Ziv Markov-chain Algorithm is a compression method based on
 the famous LZ77 algorithm, and was first introduced by 7-Zip for use in
 7z archives.
 .
 Its main characteristics are a very high compression ratio, with high RAM
 usage, and fast decompression, with low RAM usage. These properties make
 it well suited to embedded uses, such as for ROM (firmware) compression.
 .
 This package provides the lzma command line utility, which has a
 familiar gzip-like interface.
Homepage: http://www.7-zip.org/sdk.html

Package: libuuid1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 110
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Size: 57850
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: apache2-doc
Priority: optional
Section: doc
Installed-Size: 12467
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Source: apache2
Version: 2.2.22-13+deb7u4
Size: 1775012
Description: Apache HTTP Server documentation
 This package provides the documentation for Apache 2. For more details
 see the apache2 package description.
Homepage: http://httpd.apache.org/

Package: libtasn1-3
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 103
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Version: 2.13-2+deb7u2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 68470
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: lsb-base
Multi-Arch: foreign
Priority: required
Section: misc
Installed-Size: 71
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Source: lsb
Version: 4.1+Debian8+deb7u1
Size: 26750
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: fontconfig
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 466
Maintainer: Keith Packard <keithp@debian.org>
Architecture: i386
Version: 2.9.0-7.1
Replaces: fontconfig-config (<< 2.5.93-1)
Depends: libc6 (>= 2.3.4), libfontconfig1 (>= 2.9.0), fontconfig-config
Size: 347860
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.

Package: procps
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 566
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Version: 1:3.3.3-3
Provides: watch
Depends: libc6 (>= 2.11), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps0 (>= 1:3.3.2-1), libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Size: 244438
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: libgeoip1
Priority: optional
Section: libs
Installed-Size: 292
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Architecture: i386
Source: geoip
Version: 1.4.8+dfsg-3
Depends: libc6 (>= 2.8), zlib1g (>= 1:1.1.4)
Recommends: geoip-database
Suggests: geoip-bin
Size: 120692
Description: non-DNS IP-to-country resolver library
 GeoIP is a C library that enables the user to find the country that any
 IP address or hostname originates from. It uses a file based database.
 .
 This database simply contains IP blocks as keys, and countries as values and
 it should be more complete and accurate than using reverse DNS lookups.
 .
 This package contains the shared library.
Homepage: http://www.maxmind.com/

Package: libgssapi-krb5-2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 298
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.10.1+dfsg-5+deb7u3
Depends: libc6 (>= 2.7), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1, libkrb5-3 (= 1.10.1+dfsg-5+deb7u3), libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Size: 149088
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: python-minimal
Priority: standard
Section: python
Installed-Size: 161
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: python-defaults
Version: 2.7.3-4+deb7u1
Replaces: python (<= 2.7.3-1~)
Depends: python2.7-minimal (>= 2.7.3-1~), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.7.3-1~), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Size: 42812
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/

Package: whois
Priority: standard
Section: net
Installed-Size: 176
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 5.1.1~deb7u1
Depends: libc6 (>= 2.4), libidn11 (>= 1.13)
Size: 60222
Description: intelligent WHOIS client
 This package provides a commandline client for the WHOIS (RFC 3912)
 protocol, which queries online servers for information such as contact
 details for domains and IP address assignments.
 It can intelligently select the appropriate WHOIS server for most queries.
 .
 The package also contains mkpasswd, a features-rich front end to the
 password encryption function crypt(3).

Package: debian-keyring
Priority: optional
Section: misc
Installed-Size: 49077
Maintainer: Debian Keyring Maintainers <keyring-maint@debian.org>
Architecture: all
Version: 2013.04.21
Replaces: debian-maintainers
Provides: debian-maintainers
Recommends: gnupg (>= 1.0.6-4)
Conflicts: debian-maintainers
Size: 45371088
Description: GnuPG keys of Debian Developers
 The Debian project wants developers to digitally sign the
 announcements of their packages with GnuPG, to protect against
 forgeries.  This package contains keyrings of GnuPG and keys of
 developers.
Homepage: http://keyring.debian.org/

Package: ncurses-base
Essential: yes
Multi-Arch: foreign
Priority: required
Section: misc
Installed-Size: 345
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Source: ncurses
Version: 5.9-10
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Size: 198218
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libpopt0
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 422
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Source: popt
Version: 1.16-7
Replaces: popt
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Size: 57506
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: libpam0g
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 240
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: pam
Version: 1.1.3-7.1
Replaces: libpam0g-util
Depends: libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Size: 127074
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: procinfo
Priority: optional
Section: utils
Installed-Size: 160
Maintainer: Giuseppe Iuculano <giuseppe@iuculano.it>
Architecture: i386
Version: 1:2.0.304-1
Provides: procinfo-ng
Depends: libc6 (>= 2.2), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.1.1)
Size: 55582
Description: reporter for system information from /proc and /sys
 Procinfo-NG is a small program that gathers some system information from
 diverse files under /proc and /sys and prints it to the screen.
 Procinfo-NG is a complete rewrite of the old system monitoring app procinfo.
Homepage: http://procinfo-ng.sourceforge.net

Package: libusb-0.1-4
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 72
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Source: libusb
Version: 2:0.1.12-20+nmu1
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Size: 22810
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Homepage: http://www.linux-usb.org/

Package: libgpg-error0
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 364
Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>
Architecture: i386
Source: libgpg-error
Version: 1.10-3.1
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Size: 79248
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: psmisc
Priority: optional
Section: admin
Installed-Size: 660
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Version: 22.19-1+deb7u1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libtinfo5
Size: 131814
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: ucf
Priority: standard
Section: utils
Installed-Size: 230
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Version: 3.0025+nmu3
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Size: 70848
Description: Update Configuration File: preserve user changes to config files.
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: perl-modules
Priority: standard
Section: perl
Installed-Size: 14083
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Source: perl
Version: 5.14.2-21+deb7u2
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-yaml-perl, libcpanplus-perl, libdigest-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-path-perl, libfile-spec-perl, libfile-temp-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libmodule-pluggable-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libperl4-corelibs-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libshell-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl (>= 5.14.2-1), libswitch-perl, libclass-isa-perl
Suggests: libpod-plainer-perl
Breaks: libansicolor-perl (<< 3.00), libarchive-tar-perl (<< 1.76), libattribute-handlers-perl (<< 0.89), libautodie-perl (<< 2.10.01), libcgi-pm-perl (<< 3.52), libcpan-meta-perl (<< 2.110440), libcpan-meta-yaml-perl (<< 0.003), libcpanplus-perl (<< 0.9103), libdigest-perl (<< 1.16), libextutils-cbuilder-perl (<< 0.280203), libextutils-command-perl (<< 1.17), libextutils-install-perl (<< 1.56), libextutils-parsexs-perl (<< 2.221000), libfile-path-perl (<< 2.08.01), libfile-spec-perl (<< 3.3300), libfile-temp-perl (<< 0.22), libhttp-tiny-perl (<< 0.012), libi18n-langtags-perl (<< 0.35.01), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27105), liblocale-codes-perl (<< 3.16), liblocale-maketext-perl (<< 1.19), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.994), libmath-complex-perl (<< 1.56), libmodule-build-perl (<< 0.380000), libmodule-corelist-perl (<< 2.49.02), libmodule-load-conditional-perl (<< 0.44), libmodule-load-perl (<< 0.18), libmodule-metadata-perl (<< 1.000004), libmodule-pluggable-perl (<< 3.9), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.38), libparams-check-perl (<< 0.28), libparent-perl (<< 0.225), libparse-cpan-meta-perl (<< 1.4401), libperl-ostype-perl (<< 1.002), libpod-escapes-perl (<< 1.04), libpod-parser-perl (<< 1.37), libpod-simple-perl (<< 3.16), libshell-perl (<< 0.72.01), libtest-harness-perl (<< 3.23), libtest-simple-perl (<< 0.98), libthread-queue-perl (<< 2.12), libtime-local-perl (<< 1.2000), libunicode-collate-perl (<< 0.73), libversion-perl (<< 1:0.8800), libversion-requirements-perl (<< 0.101020), podlators-perl (<< 2.3.1)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3)
Size: 3442500
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Homepage: http://dev.perl.org/perl5/

Package: bsdutils
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 180
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux (2.20.1-5.3)
Version: 1:2.20.1-5.3
Depends: libc6 (>= 2.7)
Recommends: bsdmainutils
Size: 83128
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system: logger, renice, script, scriptreplay, and wall.
 The remaining standard BSD utilities are provided by bsdmainutils.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: sensible-utils
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 107
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.0.7
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Size: 8850
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libwbclient0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Architecture: i386
Source: samba
Version: 2:3.6.6-6+deb7u5
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support, dpkg (>= 1.15.6~)
Breaks: libpam-smbpass (<< 2:3.4.1), libsmbclient (<< 2:3.4.1), samba (<< 2:3.4.1), samba-common (<< 2:3.4.1), samba-tools (<< 2:3.4.1), smbclient (<< 2:3.4.1), smbfs (<< 2:3.4.1), swat (<< 2:3.4.1), winbind (<< 2:3.4.1)
Size: 96444
Description: Samba winbind client library
 Samba is an implementation of the SMB/CIFS protocol for Unix systems,
 providing support for cross-platform file and printer sharing with
 Microsoft Windows, OS X, and other Unix systems.
 .
 This package provides a library for client applications that interact
 via the winbind pipe protocol with a Samba winbind server.
Homepage: http://www.samba.org

Package: install-info
Multi-Arch: foreign
Priority: important
Section: doc
Installed-Size: 212
Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Architecture: i386
Source: texinfo
Version: 4.13a.dfsg.1-10
Replaces: texinfo (<< 4.13a.dfsg.1-2)
Depends: libc6 (>= 2.3.4)
Breaks: texinfo (<< 4.13a.dfsg.1-2)
Size: 147188
Description: Manage installed documentation in info format
 The install-info utility creates the index of all installed documentation
 in info format and makes it available to info readers.

Package: lsb-release
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 103
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Source: lsb
Version: 4.1+Debian8+deb7u1
Depends: python (>= 2.6.6-7~), python (<< 2.8)
Recommends: apt
Suggests: lsb
Size: 27196
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: sendmail-base
Priority: extra
Section: mail
Installed-Size: 699
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: all
Source: sendmail
Version: 8.14.4-4
Depends: m4, make, adduser, perl
Suggests: sendmail-doc, ca-certificates, logcheck, logrotate, resolvconf
Size: 363706
Description: powerful, efficient, and scalable Mail Transport Agent
 Sendmail is an alternative Mail Transport Agent (MTA) for
 Debian. It is suitable for handling sophisticated mail
 configurations, although this means that its configuration
 can also be complex.
 .
 This package contains the base, architecture independent, portions
 of the sendmail packages.
Homepage: http://www.sendmail.org

Package: update-inetd
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 101
Maintainer: Serafeim Zanikolas <sez@debian.org>
Architecture: all
Version: 4.43
Replaces: netbase (<< 4.27)
Depends: debconf (>= 0.5) | debconf-2.0, libfile-temp-perl, libfile-copy-recursive-perl
Breaks: netbase (<< 4.27)
Size: 21760
Description: inetd configuration file updater
 This package provides a program used by other packages to
 automatically update /etc/inetd.conf, the configuration file shared
 by all implementations of the Internet super-server.
 .
 Note that xinetd is not supported by this package.

Package: libcrack2
Priority: optional
Section: libs
Installed-Size: 469
Maintainer: Jan Dittberner <jandd@debian.org>
Architecture: i386
Source: cracklib2
Version: 2.8.19-3
Depends: libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Recommends: cracklib-runtime
Size: 59882
Description: pro-active password checker library
 Shared library for cracklib2 which contains a C function which may be
 used in a passwd like program. The idea is simple: try to prevent
 users from choosing passwords that could be guessed by crack by
 filtering them out, at source. cracklib2 is NOT a replacement passwd
 program. cracklib2 is a LIBRARY.
Homepage: http://sourceforge.net/projects/cracklib

Package: ssl-cert
Priority: optional
Section: utils
Installed-Size: 101
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Version: 1.0.32
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Suggests: openssl-blacklist
Size: 19456
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.

Package: bzip2
Multi-Arch: foreign
Priority: standard
Section: utils
Installed-Size: 113
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 1.0.6-4
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-4), libc6 (>= 2.4)
Suggests: bzip2-doc
Size: 49482
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: vim-common
Priority: important
Section: editors
Installed-Size: 287
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: vim
Version: 2:7.3.547-7
Depends: libc6 (>= 2.3.4)
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Size: 162398
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains files shared by all non GUI-enabled vim
 variants (vim and vim-tiny currently) available in Debian.
 Examples of such shared files are: manpages, common executables
 like xxd, and configuration files.
Homepage: http://www.vim.org/

Package: openssl
Priority: optional
Section: utils
Installed-Size: 1002
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: i386
Version: 1.0.1e-2+deb7u17
Depends: libc6 (>= 2.7), libssl1.0.0 (>= 1.0.1e-2+deb7u5), zlib1g (>= 1:1.1.4)
Suggests: ca-certificates
Size: 694194
Description: Secure Socket Layer (SSL) binary and related cryptographic tools
 This package contains the openssl binary and related tools.
 .
 It is part of the OpenSSL implementation of SSL.
 .
 You need it to perform certain cryptographic actions like:
  -  Creation of RSA, DH and DSA key parameters;
  -  Creation of X.509 certificates, CSRs and CRLs;
  -  Calculation of message digests;
  -  Encryption and decryption with ciphers;
  -  SSL/TLS client and server tests;
  -  Handling of S/MIME signed or encrypted mail.

Package: console-common
Priority: optional
Section: utils
Installed-Size: 792
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: all
Version: 0.7.87
Replaces: console-data (<< 1999.08.29-18), console-tools (<< 1:0.2.3-18), kbd (<< 0.99-12)
Depends: debconf (>= 0.5) | debconf-2.0, debianutils (>= 1.13), console-data, kbd | console-tools (>= 1:0.2.3dbs-54), lsb-base (>= 3.0)
Pre-Depends: debconf | debconf-2.0
Conflicts: console-data (<< 1999.08.29-20)
Size: 128384
Description: basic infrastructure for text console configuration
 This package contains the install-keymap(8) utility, which is the
 recommended tool to specify a boot-time keymap to the system, as well
 as tools for internal use of keymap-providing packages.

Package: ncurses-bin
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 491
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Source: ncurses
Version: 5.9-10
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9-3~)
Size: 332378
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Priority: required
Section: perl
Installed-Size: 4227
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: i386
Source: perl
Version: 5.14.2-21+deb7u2
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.14.2
Pre-Depends: libc6 (>= 2.11), dpkg (>= 1.14.20)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libfile-spec-perl (<< 3.3300), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.23), libsocket-perl (<< 1.940), libxsloader-perl (<< 0.13)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Size: 1485248
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: sysv-rc
Priority: required
Section: admin
Installed-Size: 296
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Size: 81816
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: apt
Priority: important
Section: admin
Installed-Size: 3211
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Version: 0.9.7.9+deb7u7
Replaces: manpages-pl (<< 20060617-3~)
Depends: libapt-pkg4.12 (>= 0.9.7.9+deb7u7), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), debian-archive-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev, apt-doc, xz-utils, python-apt
Conflicts: python-apt (<< 0.7.93.2~)
Size: 1253722
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: libswitch-perl
Priority: standard
Section: perl
Installed-Size: 88
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.16-2
Depends: perl, perl-modules
Size: 21030
Description: switch statement for Perl
 Switch.pm implements a generalized case mechanism that covers many
 possible combinations of switch and case values.
 .
 This is an obsolete module provided for compatiblity since it is being
 removed from the core. For perl 5.10 and above the "given/when" builtins
 are much preferred.
Homepage: http://search.cpan.org/dist/Switch/

Package: libisc84
Priority: standard
Section: libs
Installed-Size: 426
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libxml2 (>= 2.7.4)
Conflicts: libbind0, libbind9-41
Size: 182814
Description: ISC Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libisc shared library used by BIND's daemons and
 clients.

Package: libprocps0
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 120
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Source: procps
Version: 1:3.3.3-3
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 56786
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: db5.1-util
Multi-Arch: foreign
Priority: standard
Section: database
Installed-Size: 248
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db
Version: 5.1.29-5
Depends: libc6 (>= 2.4), libdb5.1
Size: 84410
Description: Berkeley v5.1 Database Utilities
 This package provides different tools for manipulating databases
 in the Berkeley v5.1 database format, and includes:
  - db5.1_archive: write the pathnames of the log files no longer in use.
  - db5.1_checkpoint: daemon process to monitor the database log and
    checkpoint it periodically.
  - db5.1_deadlock: traverse the database environment lock region and
    abort lock requests when a deadlock is detected.
  - db5.1_load: loads (and creates) a database from standard input.
  - db5.1_dump: read a database file and write it in a format understood
    by db4.{2..8}_load.
  - db5.1_printlog: dump log files in human readable format.
  - db5.1_stat: display statistics for Berkeley DB environments.
  - db5.1_upgrade: upgrades the version of files and the databases they
    contain.
  - db5.1_verify: check the structure of files and their databases.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: libunistring0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 1147
Maintainer: Andreas Rottmann <rotty@debian.org>
Architecture: i386
Source: libunistring
Version: 0.9.3-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 441844
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: http://www.gnu.org/software/libunistring/

Package: mtools
Priority: optional
Section: otherosfs
Installed-Size: 339
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 4.0.17-1
Depends: libc6 (>= 2.7)
Suggests: floppyd
Size: 195734
Description: Tools for manipulating MSDOS files
 Mtools is a collection of utilities to access MS-DOS disks from Unix
 without mounting them. It supports Win'95 style long file names, OS/2
 Xdf disks, ZIP/JAZ disks and 2m disks (store up to 1992kB on a high
 density 3 1/2 disk).
 .
 Also included in this package are commands to eject and manipulate
 the write/password protection control of Zip disks.
Homepage: http://www.gnu.org/software/mtools/

Package: libgssglue1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 86
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libgssglue
Version: 0.4-2
Replaces: libgssapi2 (<= 0.11-1)
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Conflicts: libgssapi2 (<= 0.11-1)
Size: 26128
Description: mechanism-switch gssapi library
 libgssglue provides a gssapi interface, but does not implement any
 gssapi mechanisms itself; instead it calls other gssapi functions
 (e.g., those provided by MIT Kerberos), depending on the requested
 mechanism, to do the work.
Homepage: http://www.citi.umich.edu/projects/nfsv4/linux/

Package: libisccfg82
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libdns88, libisc84, libisccc80, libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Size: 59844
Description: Config File Handling Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libisccfg shared library used by BIND's daemons
 and clients to read and write ISC-style configuration files like named.conf
 and rndc.conf.

Package: libk5crypto3
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 209
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.10.1+dfsg-5+deb7u3
Depends: libc6 (>= 2.4), libkeyutils1, libkrb5support0 (>= 1.7dfsg~beta2)
Pre-Depends: multiarch-support
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Conflicts: libkrb53
Size: 108702
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: netbase
Priority: important
Section: admin
Installed-Size: 65
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Version: 5.0
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7~rc1)
Conflicts: inetutils-inetd (<< 2:1.4.3+20060719-3), openbsd-inetd (<< 0.20050402-3)
Size: 20072
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libmagic1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 2448
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Source: file
Version: 5.11-2+deb7u8
Depends: libc6 (>= 2.8), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: file
Size: 206060
Description: File type determination library using "magic" numbers
 This library can be used to classify files according to magic number tests. It
 implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/

Package: libdrm2
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 524
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: libdrm
Version: 2.4.40-1~deb7u2
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Size: 460178
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.

Package: libsepol1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 321
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Source: libsepol
Version: 2.1.4-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 135656
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libpam-modules
Multi-Arch: same
Priority: required
Section: admin
Installed-Size: 752
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: pam
Version: 1.1.3-7.1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.8), libdb5.1, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.0.85), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.3-7.1)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Size: 338116
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: tzdata
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 1363
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Version: 2015d-0+deb7u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-wheezy
Depends: debconf (>= 0.5) | debconf-2.0
Size: 413608
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: libudev0
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 189
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: udev
Version: 175-7.2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 127852
Description: libudev shared library
 This library provides access to udev device information.

Package: python
Priority: standard
Section: python
Installed-Size: 658
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: python-defaults
Version: 2.7.3-4+deb7u1
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.3-1~), python-minimal (= 2.7.3-4+deb7u1)
Suggests: python-doc (= 2.7.3-4+deb7u1), python-tk (= 2.7.3-4+deb7u1)
Breaks: python-bz2 (<< 1.1-8), python-csv (<< 1.0-4), python-email (<< 2.5.5-3), update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Size: 180608
Description: interactive high-level object-oriented language (default version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Homepage: http://www.python.org/

Package: gettext
Priority: optional
Section: devel
Installed-Size: 6107
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 0.18.1.1-9
Provides: libasprintf-dev, libgettextpo-dev
Depends: libc6 (>= 2.11), libcroco3 (>= 0.6.2), libglib2.0-0 (>= 2.12.0), libgomp1 (>= 4.2.1), libncurses5 (>= 5.5-5~), libtinfo5, libunistring0, libxml2 (>= 2.7.4), libgettextpo0 (= 0.18.1.1-9), libasprintf0c2 (= 0.18.1.1-9), gettext-base, dpkg (>= 1.15.4) | install-info
Recommends: curl | wget | lynx-cur, autopoint
Suggests: gettext-doc
Breaks: autopoint (<= 0.17-11)
Size: 1916374
Description: GNU Internationalization utilities
 Interesting for authors or maintainers of other packages or programs
 which they want to see internationalized.
Homepage: http://www.gnu.org/software/gettext/

Package: libfontconfig1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 430
Maintainer: Keith Packard <keithp@debian.org>
Architecture: i386
Source: fontconfig
Version: 2.9.0-7.1
Provides: libfontconfig
Depends: libc6 (>= 2.7), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4), fontconfig-config (= 2.9.0-7.1)
Pre-Depends: multiarch-support
Size: 300542
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.

Package: ifupdown
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 196
Maintainer: Andrew Shadura <andrewsh@debian.org>
Architecture: i386
Version: 0.7.8
Replaces: netbase (<< 5.0)
Depends: iproute (>= 20071016-1), libc6 (>= 2.7), lsb-base (>= 4.1+Debian3), initscripts (>= 2.88dsf-25)
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: isc-dhcp-client | dhcp-client, ppp, rdnssd, net-tools
Breaks: dhcp-client (<< 3.0), netbase (<< 5.0)
Size: 64282
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: libsemanage1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 268
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Source: libsemanage
Version: 2.1.6-6
Depends: libsemanage-common (= 2.1.6-6), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 1.32), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Size: 102244
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: syslinux-common
Priority: optional
Section: utils
Installed-Size: 3144
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: all
Source: syslinux
Version: 2:4.05+dfsg-6+deb7u1
Replaces: syslinux
Recommends: libcrypt-passwdmd5-perl, libdigest-sha-perl
Breaks: syslinux (<< 2:4.05+dfsg-6+deb7u1)
Size: 934446
Description: collection of boot loaders (common files)
 SYSLINUX is a collection of boot loaders which operates off Linux ext2/3/4 or
 btrfs filesystems, FAT and NTFS filesystems, network servers using PXE
 firmware, or from CD-ROMs.
 .
 This package contains common files.
Homepage: http://syslinux.zytor.com/

Package: libaprutil1-dbd-sqlite3
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apr-util
Version: 1.4.1-3
Depends: libaprutil1 (= 1.4.1-3), libc6 (>= 2.3.6-6~), libsqlite3-0 (>= 3.5.9)
Size: 18874
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the SQLite3 database driver.
Homepage: http://apr.apache.org/

Package: mountall
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 236
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Version: 2.46
Replaces: upstart (<< 0.6.3-2)
Depends: makedev, udev, plymouth, coreutils (>= 7.1), libc6 (>= 2.9), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libudev0 (>= 152)
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initscripts (<< 2.88dsf-13.3), policycoreutils (<< 2.0.69-2ubuntu4), usplash (<< 0.5.47)
Size: 77636
Description: filesystem mounting tool
 mountall mounts filesystems when the underlying block devices are
 ready, or when network interfaces come up, checking the filesystems
 first.

Package: kmod
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 192
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 9-3
Replaces: module-init-tools (<< 4)
Depends: libc6 (>= 2.8), libkmod2 (>= 6~), lsb-base (>= 3.0-6)
Breaks: module-init-tools (<< 4)
Size: 59808
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libapt-pkg4.12
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 2708
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Source: apt
Version: 0.9.7.9+deb7u7
Depends: libbz2-1.0, libc6 (>= 2.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.2.3.3)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~)
Size: 902026
Description: package managment runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: console-data
Priority: optional
Section: utils
Installed-Size: 2422
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: all
Version: 2:1.12-2
Replaces: console-tools-data
Provides: console-keymaps, console-tools-data
Depends: debconf (>= 0.5) | debconf-2.0
Recommends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), console-common (>= 0.7.62)
Suggests: unicode-data
Conflicts: console-tools-data, kbd (<= 0.96a-1), kbd-data
Size: 1192006
Description: keymaps, fonts, charset maps, fallback tables for console-tools
 This package provides the standard data files for the Linux console tools.
 .
 This includes keyboard definitions (keymaps), console fonts for various
 encodings, maps defining the standard charsets for use by text applications,
 and fallback tables allowing to approximate an unavailable character's glyph
 with the glyph of another character in the current font.

Package: diffutils
Essential: yes
Priority: required
Section: utils
Installed-Size: 1102
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 1:3.2-6
Replaces: diff
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: diffutils-doc, wdiff
Size: 362934
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: rmail
Priority: extra
Section: mail
Installed-Size: 337
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: i386
Source: sendmail
Version: 8.14.4-4
Depends: sendmail-bin | mail-transport-agent, libc6 (>= 2.4), libldap-2.4-2 (>= 2.4.7)
Conflicts: courier-mta, exim, exim-tls, exim4-daemon-custom, exim4-daemon-heavy, exim4-daemon-light, masqmail, postfix, sendmail (<< 8.13.1-7), smail, zmailer
Size: 249490
Description: MTA->UUCP remote mail handler
 Rmail handles mail received via uucp and passes it to the local
 sendmail (or workalike).
 .
 This version comes from the sendmail source package and the only
 change is the call to sendmail (from -obq to -obi).
Homepage: http://www.sendmail.org

Package: libsnmp-base
Priority: optional
Section: libs
Installed-Size: 1507
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: all
Source: net-snmp
Version: 5.4.3~dfsg-2.8+deb7u1
Replaces: libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg)
Suggests: snmp-mibs-downloader
Conflicts: libsnmp-dev (<< 5.4~dfsg), libsnmp9-dev (<< 5.4~dfsg)
Size: 1099712
Description: SNMP (Simple Network Management Protocol) MIBs and documentation
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 This package includes documentation and MIBs (Management Information
 Bases) for the SNMP libraries, agents and applications. MIBs contain
 a formal description of the data that can be managed using SNMP.
 and applications.
Homepage: http://net-snmp.sourceforge.net/

Package: gawk
Multi-Arch: foreign
Priority: optional
Section: interpreters
Installed-Size: 2240
Maintainer: Arthur Loiret <aloiret@debian.org>
Architecture: i386
Version: 1:4.0.1+dfsg-2.1
Provides: awk
Pre-Depends: libc6 (>= 2.11), libreadline6 (>= 6.0), libsigsegv2
Suggests: gawk-doc
Size: 932638
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: rpcbind
Priority: standard
Section: net
Installed-Size: 141
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 0.2.0-8
Provides: portmap
Depends: libc6 (>= 2.4), libtirpc1, libwrap0 (>= 7.6-4~), lsb-base (>= 3.2-14), insserv (>= 1.14.0-2.1) | file-rc, initscripts (>= 2.88dsf-13.3)
Conflicts: portmap
Size: 44822
Description: converts RPC program numbers into universal addresses
 The rpcbind utility is a server that converts RPC program numbers
 into universal addresses.
Homepage: http://sourceforge.net/projects/rpcbind/

Package: libkmod2
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: kmod
Version: 9-3
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 50272
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libtdb1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Jelmer Vernooij <jelmer@debian.org>
Architecture: i386
Source: tdb
Version: 1.2.10-2
Depends: libc6 (>= 2.2)
Pre-Depends: multiarch-support
Size: 40930
Description: Trivial Database - shared library
 This is a simple database API. It is modelled after the structure
 of GDBM. TDB features, unlike GDBM, multiple writers support with
 appropriate locking and transactions.
 .
 This package contains the shared library file.
Homepage: http://tdb.samba.org/

Package: tar
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 2461
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.26+dfsg-0.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libc6 (>= 2.8)
Suggests: bzip2, ncompress, xz-utils
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Size: 983696
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libgettextpo0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 344
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Source: gettext
Version: 0.18.1.1-9
Replaces: gettext (<< 0.18.1.1-6)
Depends: libc6 (>= 2.11), libunistring0
Pre-Depends: multiarch-support
Breaks: gettext (<< 0.18.1.1-6)
Size: 140324
Description: GNU Internationalization library
 This package contains the libgettextpo shared library for interfacing
 programmatically with GNU gettext .po files.
Homepage: http://www.gnu.org/software/gettext/

Package: file
Multi-Arch: foreign
Priority: standard
Section: utils
Installed-Size: 109
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Version: 5.11-2+deb7u8
Depends: libc6 (>= 2.4), libmagic1 (= 5.11-2+deb7u8), zlib1g (>= 1:1.1.4)
Size: 53134
Description: Determines file type using "magic" numbers
 File tests each argument in an attempt to classify it. There are three sets of
 tests, performed in this order: filesystem tests, magic number tests, and
 language tests. The first test that succeeds causes the file type to be
 printed.
Homepage: http://www.darwinsys.com/file/

Package: libsigsegv2
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: i386
Source: libsigsegv
Version: 2.9-4
Depends: libc6 (>= 2.2)
Size: 28304
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/

Package: libclass-isa-perl
Priority: standard
Section: perl
Installed-Size: 55
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.36-3
Size: 12276
Description: report the search path for a class's ISA tree
 Suppose you have a class (like Food::Fish::Fishstick) that is derived, via
 its @ISA, from one or more superclasses (as Food::Fish::Fishstick is from
 Food::Fish, Life::Fungus, and Chemicals), and some of those superclasses may
 themselves each be derived, via its @ISA, from one or more superclasses (as
 above).
 .
 When, then, you call a method in that class ($fishstick->calories), Perl
 first searches there for that method, but if it's not there, it goes
 searching in its superclasses, and so on, in a depth-first (or maybe
 "height-first" is the word) search. In the above example, it'd first look in
 Food::Fish, then Food, then Matter, then Life::Fungus, then Life, then
 Chemicals.
 .
 This library, Class::ISA, provides functions that return that list -- the
 list (in order) of names of classes Perl would search to find a method, with
 no duplicates.
Homepage: http://search.cpan.org/dist/Class-ISA/

Package: libdrm-radeon1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 522
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: libdrm
Version: 2.4.40-1~deb7u2
Depends: libc6 (>= 2.3.4), libdrm2 (>= 2.4.38)
Pre-Depends: multiarch-support
Size: 457770
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the radeon-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.

Package: libmount1
Priority: required
Section: libs
Installed-Size: 249
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libselinux1 (>= 1.32), libsepol1 (>= 1.14)
Pre-Depends: multiarch-support
Size: 120576
Description: block device id library
 The device mounting library, used by mount and mount helpers.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: zlib1g
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 165
Maintainer: Mark Brown <broonie@debian.org>
Architecture: i386
Source: zlib
Version: 1:1.2.7.dfsg-13
Provides: libz1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Size: 91000
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: libapt-inst1.5
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 695
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Source: apt
Version: 0.9.7.9+deb7u7
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Pre-Depends: multiarch-support
Size: 166572
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: adduser
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Size: 263714
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: locales
Priority: standard
Section: localization
Installed-Size: 15120
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: eglibc
Version: 2.13-38+deb7u8
Replaces: base-config, lliurex-belocs-locales-data
Depends: glibc-2.13-1, debconf (>= 0.5) | debconf-2.0
Conflicts: base-config, belocs-locales-bin, belocs-locales-data
Size: 5708190
Description: Embedded GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains the libc.mo i18n files, plus tools to generate
 locale definitions from source files (included in this package). It
 allows you to customize which definitions actually get
 generated. This is a space-saver over how this package used to be,
 with all locales generated by default. This created a package that
 unpacked to an excess of 30 megs.
Homepage: http://www.eglibc.org

Package: traceroute
Priority: important
Section: net
Installed-Size: 165
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Version: 1:2.0.18-3
Depends: libc6 (>= 2.4)
Size: 50252
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: http://traceroute.sourceforge.net/

Package: python2.7
Priority: optional
Section: python
Installed-Size: 8421
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Version: 2.7.3-6+deb7u2
Replaces: python-profiler (<= 2.7.1-2)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: python2.7-minimal (= 2.7.3-6+deb7u2), mime-support, libbz2-1.0, libc6 (>= 2.11), libdb5.1, libexpat1 (>= 2.1~beta3), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libreadline6 (>= 6.0), libsqlite3-0 (>= 3.5.9), libtinfo5
Suggests: python2.7-doc, binutils
Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4)
Conflicts: python-profiler (<= 2.7.1-2)
Size: 2687092
Description: Interactive high-level object-oriented language (version 2.7)
 Version 2.7 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: manpages
Priority: important
Section: doc
Installed-Size: 851
Maintainer: Martin Schulze <joey@debian.org>
Architecture: all
Version: 3.44-1
Replaces: bind, libc-bin (<< 2.13-31), rsh-server (<< 0.10-7)
Suggests: man-browser
Size: 795004
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.
Homepage: http://www.kernel.org/doc/man-pages/

Package: ed
Priority: optional
Section: editors
Installed-Size: 119
Maintainer: Martin Zobel-Helas <zobel@debian.org>
Architecture: i386
Version: 1.6-2
Depends: libc6 (>= 2.11), dpkg (>= 1.15.4) | install-info
Size: 55320
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Homepage: http://www.gnu.org/software/ed/

Package: libgcc1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 145
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.7 (4.7.2-5)
Version: 1:4.7.2-5
Depends: gcc-4.7-base (= 4.7.2-5), libc6 (>= 2.2.4)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Size: 53260
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: libklibc
Priority: optional
Section: libs
Installed-Size: 133
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 2.0.1-3.1
Size: 58512
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: base-files
Essential: yes
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 217
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 7.1wheezy8
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Size: 67024
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: snmp
Priority: optional
Section: net
Installed-Size: 1253
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: i386
Source: net-snmp
Version: 5.4.3~dfsg-2.8+deb7u1
Depends: libc6 (>= 2.4), libsnmp15 (>= 5.4.3~dfsg), libssl1.0.0 (>= 1.0.0)
Recommends: perl-modules
Size: 1042036
Description: SNMP (Simple Network Management Protocol) applications
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 The Net-SNMP applications are a collection of command line clients
 for issuing SNMP requests to agents.
Homepage: http://net-snmp.sourceforge.net/

Package: mount
Essential: yes
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 401
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.8), libmount1 (>= 2.20.1), libselinux1 (>= 2.0.15), libsepol1 (>= 1.14)
Suggests: nfs-common (>= 1:1.1.0-13)
Size: 212366
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: libsqlite3-0
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 824
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Architecture: i386
Source: sqlite3
Version: 3.7.13-1+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 462362
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: libtext-iconv-perl
Priority: required
Section: perl
Installed-Size: 82
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 1.7-5
Depends: libc6 (>= 2.1.3), perl-base (>= 5.14.2-5), perlapi-5.14.2
Size: 17320
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: quota
Priority: optional
Section: admin
Installed-Size: 1445
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: i386
Version: 4.00-4+deb7u1
Depends: e2fslibs (>= 1.37), libc6 (>= 2.3), libcomerr2 (>= 1.01), libdbus-1-3 (>= 1.0.2), libldap-2.4-2 (>= 2.4.7), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libwrap0 (>= 7.6-4~), debconf (>= 1.2.9) | debconf-2.0, lsb-base (>= 3.2-13)
Suggests: libnet-ldap-perl, rpcbind | portmap, default-mta | mail-transport-agent
Size: 637282
Description: disk quota management tools
 This package provides the standard set of utilities for manipulating
 file system usage caps via the Linux Diskquota system. It can set hard
 or soft limits with adjustable grace periods on block or inode usage for
 users and groups. It allows users to check their quota status,
 integrates with LDAP, and supports quotas on remote machines via NFS.
Homepage: http://sourceforge.net/projects/linuxquota

Package: libcups2
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 443
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: i386
Source: cups
Version: 1.5.3-5+deb7u6
Replaces: libcupsys2
Provides: libcupsys2
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.4), libgnutls26 (>= 2.12.17-0), libgssapi-krb5-2 (>= 1.10+dfsg~), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: cups-common
Breaks: cups (<< 1.5.0)
Conflicts: libcupsys2
Size: 256170
Description: Common UNIX Printing System(tm) - Core library
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the base shared libraries for CUPS.
Homepage: http://www.cups.org

Package: libreadline6
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 366
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Source: readline6
Version: 6.2+dfsg-0.1
Depends: readline-common, libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Size: 161838
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 289
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Source: ncurses
Version: 5.9-10
Depends: libtinfo5 (= 5.9-10), libc6 (>= 2.4)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Size: 116616
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: vim
Priority: optional
Section: editors
Installed-Size: 1797
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 2:7.3.547-7
Provides: editor
Depends: vim-common (= 2:7.3.547-7), vim-runtime (= 2:7.3.547-7), libacl1 (>= 2.2.51-8), libc6 (>= 2.11), libgpm2 (>= 1.20.4), libselinux1 (>= 1.32), libtinfo5
Suggests: ctags, vim-doc, vim-scripts
Size: 778220
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: http://www.vim.org/

Package: rsync
Multi-Arch: foreign
Priority: optional
Section: net
Installed-Size: 624
Maintainer: Paul Slootman <paul@debian.org>
Architecture: i386
Version: 3.0.9-4
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.8), libpopt0 (>= 1.14), lsb-base (>= 3.2-14), base-files (>= 4.0.1)
Suggests: openssh-client, openssh-server
Breaks: duplicity (<< 0.6.11)
Size: 357270
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: http://rsync.samba.org/

Package: odbcinst
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: unixodbc
Version: 2.2.14p2-5
Replaces: odbcinst1, odbcinst1debian1 (<< 2.2.11-20), unixodbc (<< 2.1.1-2)
Depends: libc6 (>= 2.4), libltdl7 (>= 2.4.2), odbcinst1debian2 (>= 2.2.14p2)
Conflicts: odbcinst1
Size: 40452
Description: Helper program for accessing odbc ini files
 This package contains the odbcinst helper tool, which allows ODBC driver
 packages to install their own driver settings.
Homepage: http://www.unixodbc.org/

Package: debconf-utils
Priority: optional
Section: devel
Installed-Size: 150
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.49
Replaces: debconf (<< 0.1.0)
Depends: debconf (>= 1.3.20)
Conflicts: debconf (<< 0.1.0)
Size: 55802
Description: debconf utilities
 This package contains some small utilities for debconf developers.

Package: libkeyutils1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 19
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: i386
Source: keyutils
Version: 1.5.5-3+deb7u1
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Size: 8678
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libodbc1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 633
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: unixodbc
Version: 2.2.14p2-5
Replaces: unixodbc (<< 2.2.14p2-3)
Depends: libc6 (>= 2.7), libltdl7 (>= 2.4.2)
Pre-Depends: multiarch-support
Suggests: libmyodbc, odbc-postgresql, tdsodbc, unixodbc-bin
Breaks: unixodbc (<< 2.2.14p2-3)
Size: 252186
Description: ODBC library for Unix
 UnixODBC is an implementation of the Open DataBase Connectivity standard,
 a database abstraction layer that allows applications to be used with
 many different relational databases by way of a single library.
 .
 This package provides the UnixODBC shared library, libodbc; and
 libodbctxt.so, a sample driver that reads from and writes to flat text
 files.
Homepage: http://www.unixodbc.org/

Package: logrotate
Priority: important
Section: admin
Installed-Size: 149
Maintainer: Paul Martin <pm@debian.org>
Architecture: i386
Version: 3.8.1-4
Depends: libc6 (>= 2.8), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Recommends: mailx
Breaks: postgresql-common (<= 126)
Size: 49528
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.

Package: libltdl7
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 392
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: i386
Source: libtool
Version: 2.4.2-1.1
Depends: libc6 (>= 2.3)
Pre-Depends: multiarch-support
Size: 352146
Description: A system independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: http://www.gnu.org/software/libtool/

Package: libexpat1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 333
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: i386
Source: expat
Version: 2.1.0-1+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: wink (<= 1.5.1060-4)
Size: 138592
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: memtester
Priority: optional
Section: utils
Installed-Size: 80
Maintainer: Gürkan Sengün <gurkan@phys.ethz.ch>
Architecture: i386
Version: 4.2.2-1
Depends: libc6 (>= 2.10)
Size: 18008
Description: Utility for testing the memory subsystem
 This is a userspace utility for testing the memory subsystem for faults.
 In comparison to memtest86 you do not need to reboot the computer to test
 for memory faults.
 .
 Memtester can also be told to test memory starting at a particular
 physical address.
Homepage: http://pyropus.ca/software/memtester/

Package: fetchmail
Priority: optional
Section: mail
Installed-Size: 2359
Maintainer: Fetchmail Maintainers <pkg-fetchmail-maint@lists.alioth.debian.org>
Architecture: i386
Version: 6.3.21-4
Replaces: fetchmail-common, fetchmail-ssl
Provides: fetchmail-ssl
Depends: libc6 (>= 2.11), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.10+dfsg~), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.0 (>= 1.0.0), debianutils (>= 1.7), adduser (>= 3.34), lsb-base (>= 3.2-13)
Recommends: ca-certificates
Suggests: fetchmailconf, default-mta | mail-transport-agent, resolvconf
Breaks: fetchmail-ssl (<= 6.2.5-12), logcheck (<< 1.1.1-9)
Conflicts: fetchmail-common
Size: 921068
Description: SSL enabled POP3, APOP, IMAP mail gatherer/forwarder
 fetchmail is a free, full-featured, robust, and well-documented remote mail
 retrieval and forwarding utility intended to be used over on-demand TCP/IP
 links (such as SLIP or PPP connections).  It retrieves mail from remote mail
 servers and forwards it to your local (client) machine's delivery system, so
 it can then be read by normal mail user agents such as mutt, elm, pine,
 (x)emacs/gnus, or mailx.  The fetchmailconf package includes an interactive
 GUI configurator suitable for end-users.
 .
 Kerberos V and GSSAPI are supported.
 .
 Kerberos IV,  RPA, OPIE and other support for some other features are
 available if the package is recompiled.
Homepage: http://www.fetchmail.info

Package: iproute
Multi-Arch: foreign
Priority: important
Section: net
Installed-Size: 973
Maintainer: Debian iproute maintainers <ah-iproute@debian.org>
Architecture: i386
Source: iproute (20120521-3)
Version: 20120521-3+b3
Provides: arpd
Depends: libc6 (>= 2.4), libdb5.1
Recommends: libatm1
Suggests: iproute-doc
Conflicts: arpd
Size: 459946
Description: networking and traffic control tools
 The iproute suite, also known as iproute2, is a collection of
 utilities for networking and traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2

Package: db-util
Priority: extra
Section: utils
Installed-Size: 38
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: all
Source: db-defaults
Version: 5.1.6
Depends: db5.1-util
Size: 2866
Description: Berkeley Database Utilities
 This empty package depends on the recommended utilities package
 containing different tools for manipulating databases and installs
 unversioned links to current database utilities.

Package: sendmail-cf
Priority: extra
Section: mail
Installed-Size: 558
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: all
Source: sendmail
Version: 8.14.4-4
Depends: m4
Suggests: sendmail-doc
Size: 300492
Description: powerful, efficient, and scalable Mail Transport Agent
 Sendmail is an alternative Mail Transport Agent (MTA) for
 Debian. It is suitable for handling sophisticated mail
 configurations, although this means that its configuration
 can also be complex.
 .
 This package contains the .m4 (configuration files) for the
 sendmail packages.
Homepage: http://www.sendmail.org

Package: odbcinst1debian2
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 210
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: unixodbc
Version: 2.2.14p2-5
Replaces: unixodbc (<< 2.1.1-2)
Depends: libc6 (>= 2.4), libltdl7 (>= 2.4.2), odbcinst
Pre-Depends: multiarch-support
Breaks: libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8)
Conflicts: odbcinst1, odbcinst1debian1
Size: 78844
Description: Support library for accessing odbc ini files
 This package contains the libodbcinst library from unixodbc, a library
 used by ODBC drivers for reading their configuration settings from
 /etc/odbc.ini and ~/.odbc.ini.
 .
 Also contained in this package are the driver setup plugins, which
 describe the features supported by individual ODBC drivers.
Homepage: http://www.unixodbc.org/

Package: ttf-freefont
Priority: extra
Section: oldlibs
Installed-Size: 139
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Source: fonts-freefont
Version: 20120503-1
Depends: fonts-freefont-ttf
Size: 118252
Description: transitional dummy package
 This package is a dummy transitional package. It can be safely removed.
Homepage: http://savannah.gnu.org/projects/freefont/

Package: libattr1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: attr
Version: 1:2.4.46-8
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Size: 19532
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: liblwres80
Priority: standard
Section: libs
Installed-Size: 125
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libxml2 (>= 2.6.27)
Conflicts: libbind0
Size: 55346
Description: Lightweight Resolver Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the liblwres shared library used by BIND's daemons
 and clients.

Package: libpcap0.8
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Source: libpcap
Version: 1.3.0-1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.11)
Pre-Depends: multiarch-support
Size: 141324
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: http://www.tcpdump.org/

Package: libsnmp15
Priority: optional
Section: libs
Installed-Size: 3982
Maintainer: Net-SNMP Packaging Team <pkg-net-snmp-devel@lists.alioth.debian.org>
Architecture: i386
Source: net-snmp
Version: 5.4.3~dfsg-2.8+deb7u1
Replaces: libsnmp-base (<< 5.4.2.1~dfsg-4), snmp (<< 5.4.3~dfsg-1)
Depends: libsnmp-base (>= 5.4.3~dfsg-2.8+deb7u1), libc6 (>= 2.7), libperl5.14 (>= 5.14.2), libsensors4 (>= 1:3.0.0), libssl1.0.0 (>= 1.0.0), libwrap0 (>= 7.6-4~)
Size: 2184416
Description: SNMP (Simple Network Management Protocol) library
 The Simple Network Management Protocol (SNMP) provides a framework
 for the exchange of management information between agents (servers)
 and clients.
 .
 The Net-SNMP library contains common functions for the construction,
 sending, receiving, decoding, and manipulation of the SNMP requests
 and responses.
Homepage: http://net-snmp.sourceforge.net/

Package: sed
Essential: yes
Priority: required
Section: utils
Installed-Size: 838
Maintainer: Clint Adams <clint@debian.org>
Architecture: i386
Version: 4.2.1-10
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Size: 249502
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libidn11
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 361
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: i386
Source: libidn
Version: 1.25-2
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libidn9-dev
Size: 178292
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: sendmail-bin
Priority: extra
Section: mail
Installed-Size: 1876
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: i386
Source: sendmail
Version: 8.14.4-4
Replaces: mail-transport-agent
Provides: mail-transport-agent
Depends: sendmail-base, sendmail-cf, procps, libc6 (>= 2.4), libdb5.1, libldap-2.4-2 (>= 2.4.7), liblockfile1 (>= 1.0), libsasl2-2 (>= 2.1.24), libssl1.0.0 (>= 1.0.0), libwrap0 (>= 7.6-4~)
Suggests: sendmail-doc, sasl2-bin, libsasl2-modules, openssl
Conflicts: mail-transport-agent
Size: 965346
Description: powerful, efficient, and scalable Mail Transport Agent
 Sendmail is an alternative Mail Transport Agent (MTA) for Debian.
 It is suitable for handling sophisticated mail configurations,
 although this means that its configuration can also be complex.
 .
 Fortunately, simple thing can be done easily, and complex things
 are possible, even if not easily understood ;)  Sendmail is the *ONLY*
 MTA with a Turing complete language to control *ALL* aspects of delivery!
 .
 Sendmail provides Security and SPAM/UCE/UBE protection via several means.
 .
 Sendmail includes *no* Mail User Agents (MUA), you'll have to
 pick from the plethora of available MUAs (mutt, vm, etc.)
 .
 This package supports REGEX, DB, NIS, NIS+, LDAP, DNS maps,
 and has enabled TCPWrappers, IPv6, LockFile, SMTP AUTH(SASL), STARTTLS(SSL).
Homepage: http://www.sendmail.org

Package: python2.7-minimal
Priority: optional
Section: python
Installed-Size: 5226
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Source: python2.7
Version: 2.7.3-6+deb7u2
Replaces: python2.7 (<< 2.7.1~rc1-2~)
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.2.0)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Size: 1715338
Description: Minimal subset of the Python language (version 2.7)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.

Package: tcpdump
Priority: optional
Section: net
Installed-Size: 861
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: i386
Version: 4.3.0-1+deb7u2
Depends: libc6 (>= 2.7), libpcap0.8 (>= 1.2.1), libssl1.0.0 (>= 1.0.0)
Size: 397926
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: http://www.tcpdump.org/

Package: tofrodos
Priority: optional
Section: utils
Installed-Size: 65
Maintainer: Alexander Reichle-Schmehl <tolimar@debian.org>
Architecture: i386
Version: 1.7.9.debian.1-1
Depends: libc6 (>= 2.2)
Conflicts: sysutils (<= 2.0.0-1)
Size: 21574
Description: Converts DOS <-> Unix text files, alias tofromdos
 DOS text files traditionally have CR/LF (carriage return/line feed) pairs
 as their new line delimiters while Unix text files traditionally have
 LFs (line feeds) to terminate each line.
 .
 Tofrodos comprises one program, "fromdos" alias "todos", which converts
 text files to and from these formats. Use "fromdos" to convert DOS
 text files to the Unix format, and "todos" to convert Unix text files
 to the DOS format.
Homepage: http://www.thefreecountry.com/tofrodos/index.shtml

Package: liblockfile-bin
Multi-Arch: foreign
Priority: standard
Section: utils
Installed-Size: 70
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: i386
Source: liblockfile
Version: 1.09-5
Replaces: liblockfile1 (<< 1.09-1)
Depends: libc6 (>= 2.4)
Breaks: liblockfile1 (<< 1.09-1)
Size: 18638
Description: support binaries for and cli utilities based on liblockfile
 This package contains support binaries for the liblockfile library,
 and the command-line utility ``dotlockfile''.

Package: lynx
Priority: extra
Section: oldlibs
Installed-Size: 242
Maintainer: Atsuhito KOHDA <kohda@debian.org>
Architecture: all
Source: lynx-cur
Version: 2.8.8dev.12-2
Depends: lynx-cur (>= 2.8.8dev.12-2)
Size: 222946
Description: Text-mode WWW Browser (transitional package)
 This is a transitional package and can safely be removed; see the
 lynx-cur package instead.
Homepage: http://lynx.isc.org/

Package: klibc-utils
Priority: optional
Section: libs
Installed-Size: 395
Maintainer: maximilian attems <maks@debian.org>
Architecture: i386
Source: klibc
Version: 2.0.1-3.1
Depends: libklibc (= 2.0.1-3.1)
Breaks: initramfs-tools (<< 0.103)
Size: 188812
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: http://git.kernel.org/?p=libs/klibc/klibc.git;a=summary

Package: e2fslibs
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 415
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.42.5-1.1+deb7u1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.10)
Pre-Depends: multiarch-support
Size: 209932
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: apache2-mpm-prefork
Priority: optional
Section: httpd
Installed-Size: 4
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apache2
Version: 2.2.22-13+deb7u4
Provides: apache2, apache2-mpm, httpd, httpd-cgi
Depends: apache2.2-common (= 2.2.22-13+deb7u4), apache2.2-bin (= 2.2.22-13+deb7u4)
Conflicts: apache2-common, apache2-mpm
Size: 2348
Description: Apache HTTP Server - traditional non-threaded model
 Each Apache Multi-Processing Module provides a different "flavor" of
 web server binary, compiled with a different processing model.
 .
 The prefork MPM provides a non-threaded implementation using a variable
 number of processes where each process handles only one connection
 at the same time. It is not as fast as threaded models, but is considered to
 be more stable. It is appropriate for sites that need to maintain
 compatibility with non-thread-safe libraries, and is the best MPM for
 isolating each request, so that a problem with a single request will not
 affect any other.
Homepage: http://httpd.apache.org/

Package: libkrb5support0
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 83
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.10.1+dfsg-5+deb7u3
Depends: libc6 (>= 2.3.4), libkeyutils1
Pre-Depends: multiarch-support
Conflicts: libkrb53
Size: 49756
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: samba-common
Multi-Arch: foreign
Priority: optional
Section: net
Installed-Size: 593
Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Architecture: all
Source: samba
Version: 2:3.6.6-6+deb7u5
Replaces: samba (<< 3.0.20b-1), samba4-common (<< 4.0.0~alpha7-1)
Depends: ucf, debconf (>= 0.5) | debconf-2.0
Pre-Depends: dpkg (>= 1.15.6~)
Recommends: samba-common-bin
Conflicts: samba4-common (<< 4.0.0~alpha7-1)
Size: 213738
Description: common files used by both the Samba server and client
 Samba is an implementation of the SMB/CIFS protocol for Unix systems,
 providing support for cross-platform file and printer sharing with
 Microsoft Windows, OS X, and other Unix systems.
 .
 This package contains common files used by both Samba 3 and Samba 4.
Homepage: http://www.samba.org

Package: wget
Multi-Arch: foreign
Priority: important
Section: web
Installed-Size: 2171
Maintainer: Noël Köthe <noel@debian.org>
Architecture: i386
Version: 1.13.4-3+deb7u2
Depends: libc6 (>= 2.11), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.17-0), libgpg-error0 (>= 1.10), libidn11 (>= 1.13), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info
Conflicts: wget-ssl
Size: 764326
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: http://www.gnu.org/software/wget/

Package: base-passwd
Essential: yes
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 164
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Version: 3.5.26
Replaces: base
Depends: libc6 (>= 2.8)
Size: 47068
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: uuid-runtime
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
Depends: passwd, libuuid1 (>= 2.20.1), libc6 (>= 2.4)
Size: 61406
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUID’s, in a secure and guaranteed-unique fashion, even in the face
 of large numbers of threads trying to grab UUID’s running on
 different CPU’s. It is used by libuuid as well as the uuidgen
 program.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: bind9-host
Priority: standard
Section: net
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: dnsutils (<< 1:9.0.0), host (<< 1:9.7.0)
Provides: host
Depends: libbind9-80 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libc6 (>= 2.4), libcap2 (>= 2.10), libdns88 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc84 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libisccfg82 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), liblwres80 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27)
Conflicts: dnsutils (<< 1:9.0.0), host (<< 1:9.7.0)
Size: 72088
Description: Version of 'host' bundled with BIND 9.X
 This package provides the 'host' program in the form that is bundled with
 the BIND 9.X sources.

Package: libaprutil1
Priority: optional
Section: libs
Installed-Size: 234
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apr-util
Version: 1.4.1-3
Depends: libapr1 (>= 1.3.2), libc6 (>= 2.4), libdb5.1, libexpat1 (>= 2.0.1), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16)
Size: 91688
Description: Apache Portable Runtime Utility Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
Homepage: http://apr.apache.org/

Package: libcomerr2
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 95
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: e2fsprogs
Version: 1.42.5-1.1+deb7u1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 56392
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: sasl2-bin
Priority: optional
Section: utils
Installed-Size: 422
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: i386
Source: cyrus-sasl2
Version: 2.1.25.dfsg1-6+deb7u1
Depends: libsasl2-2 (>= 2.1.25.dfsg1-6+deb7u1), libc6 (>= 2.4), libcomerr2 (>= 1.01), libdb5.1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.7dfsg), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libssl1.0.0 (>= 1.0.0), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 3.0-6), db-util, debconf (>= 1.4.69) | cdebconf (>= 0.39)
Size: 180624
Description: Cyrus SASL - administration programs for SASL users database
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package contains administration programs for the SASL users
 database and common binary files for plugin modules.
Homepage: http://www.cyrusimap.org/

Package: groff-base
Multi-Arch: foreign
Priority: important
Section: text
Installed-Size: 2817
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Source: groff
Version: 1.21-9
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Size: 1130982
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: http://groff.ffii.org/

Package: gnupg
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 4613
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: i386
Version: 1.4.12-7+deb7u7
Depends: libbz2-1.0, libc6 (>= 2.4), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info, gpgv
Recommends: libldap-2.4-2 (>= 2.4.7), gnupg-curl
Suggests: gnupg-doc, xloadimage | imagemagick | eog, libpcsclite1
Size: 1938694
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
 .
 GnuPG does not use any patented algorithms. This means it cannot be
 compatible with PGP2, because that uses IDEA (which is patented in
 a number of countries).
Homepage: http://www.gnupg.org

Package: net-tools
Priority: important
Section: net
Installed-Size: 878
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1.60-24.2
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4)
Conflicts: ja-trans (<= 0.8-2)
Size: 336374
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/

Package: debconf-i18n
Priority: important
Section: localization
Installed-Size: 1100
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.49
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf, liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Size: 237226
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: grep
Essential: yes
Priority: required
Section: utils
Installed-Size: 1392
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 2.12-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Size: 456258
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: cracklib-runtime
Priority: optional
Section: admin
Installed-Size: 610
Maintainer: Jan Dittberner <jandd@debian.org>
Architecture: i386
Source: cracklib2
Version: 2.8.19-3
Depends: libc6 (>= 2.4), libcrack2 (>= 2.8.19-3), zlib1g (>= 1:1.1.4), file
Recommends: wamerican | wordlist
Size: 183886
Description: runtime support for password checker library cracklib2
 Run-time support programs which use the shared library in libcrack2
 including programs to build the password dictionary databases used by
 the functions in the shared library.
Homepage: http://sourceforge.net/projects/cracklib

Package: libtirpc1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 260
Maintainer: Steinar H. Gunderson <sesse@debian.org>
Architecture: i386
Source: libtirpc
Version: 0.2.2-5
Depends: libc6 (>= 2.3.6-6~), libgssglue1
Pre-Depends: multiarch-support
Size: 87940
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.

Package: libnl-genl-3-200
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: i386
Source: libnl3
Version: 3.2.7-4
Depends: libnl-3-200 (= 3.2.7-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 20304
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: http://people.suug.ch/~tgr/libnl/

Package: libaprutil1-ldap
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apr-util
Version: 1.4.1-3
Depends: libaprutil1 (= 1.4.1-3), libc6 (>= 2.3.6-6~), libldap-2.4-2 (>= 2.4.7)
Size: 16640
Description: Apache Portable Runtime Utility Library - LDAP Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the LDAP driver.
Homepage: http://apr.apache.org/

Package: plymouth
Priority: optional
Section: misc
Installed-Size: 496
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Version: 0.8.5.1-5
Depends: libc6 (>= 2.8), initramfs-tools
Pre-Depends: multiarch-support
Suggests: desktop-base, plymouth-drm
Conflicts: console-tools
Size: 123768
Description: Graphical Boot Animation and Logger
 Plymouth provides an attractive boot animation in place of the text messages
 that normally get shown. Text messages are instead redirected to a logfile for
 viewing after boot.
Homepage: http://www.freedesktop.org/wiki/Software/Plymouth

Package: kbd
Priority: optional
Section: utils
Installed-Size: 1364
Maintainer: Console utilities maintainers <pkg-kbd-devel@lists.alioth.debian.org>
Architecture: i386
Version: 1.15.3-9
Provides: console-utilities
Depends: libc6 (>= 2.7), lsb-base (>= 3.0-10)
Recommends: console-setup | console-data
Conflicts: console-utilities
Size: 450820
Description: Linux console font and keytable utilities
 This package allows you to set up the Linux console, change the font,
 resize text mode virtual consoles and remap the keyboard.
 .
 You will probably want to install a set of data files, such as the one
 in the “console-data” package.

Package: upstart
Multi-Arch: foreign
Priority: extra
Section: admin
Installed-Size: 1063
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Version: 1.6.1-1
Replaces: startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Provides: upstart-job
Depends: libc6 (>= 2.9), libdbus-1-3 (>= 1.2.16), libjson0 (>= 0.10), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libselinux1 (>= 1.32), libudev0 (>= 152), sysvinit-utils (>= 2.86.ds1-23), sysv-rc, initscripts, mountall, ifupdown (>= 0.7.3), udev (>= 175-7.1)
Suggests: python, graphviz, bash-completion
Breaks: cryptsetup (<< 2:1.4.3-4.1), friendly-recovery (<< 0.2.13), libc6 (<< 2.12.1-0ubuntu12)
Conflicts: lxcguest, startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Size: 462500
Description: event-based init daemon
 upstart is a replacement for the /sbin/init daemon which handles
 starting of tasks and services during boot, stopping them during
 shutdown and supervising them while the system is running.
Homepage: http://upstart.ubuntu.com/

Package: mlocate
Priority: standard
Section: utils
Installed-Size: 780
Maintainer: Tollef Fog Heen <tfheen@debian.org>
Architecture: i386
Version: 0.23.1-1
Depends: libc6 (>= 2.4), adduser
Conflicts: findutils (<= 4.2.31-1), slocate (<= 3.1-1.1)
Size: 108212
Description: quickly find files on the filesystem based on their name
 mlocate is a new implementation of locate, a tool to find files
 anywhere in the filesystem based on their name, using a fixed pattern
 or a regular expression. Unlike other tools like find(1), locate uses
 a previously created database to perform the search, allowing queries
 to execute much faster. This database is updated periodically from
 cron.
 .
 Several implementations of locate exist: the original implementation
 from GNU's findutils, slocate, and mlocate. The advantages of mlocate
 are:
 .
  * it indexes all the filesystem, but results of a search will only
    include files that the user running locate has access to. It does
    this by updating the database as root, but making it unreadable for
    normal users, who can only access it via the locate binary. slocate
    does this as well, but not the original locate.
 .
  * instead of re-reading all the contents of all directories each time
    the database is updated, mlocate keeps timestamp information in its
    database and can know if the contents of a directory changed without
    reading them again. This makes updates much faster and less demanding
    on the hard drive. This feature is only found in mlocate.
 .
 Installing mlocate will change the /usr/bin/locate binary to point to
 mlocate via the alternatives mechanism. After installation, you may
 wish to run /etc/cron.daily/mlocate by hand to create the database,
 otherwise mlocate won't work until that script is run from cron itself
 (since mlocate does not use the same database file as standard locate).
 Also, you may wish to remove the "locate" package in order not to have
 two different database files updated regularly on your system.
Homepage: http://carolina.mff.cuni.cz/~trmac/blog/mlocate

Package: ftp
Priority: standard
Section: net
Installed-Size: 141
Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Architecture: i386
Source: netkit-ftp
Version: 0.17-27
Replaces: netstd
Depends: libc6 (>= 2.11), libreadline6 (>= 6.0), netbase
Size: 58244
Description: classical file transfer client
 This is the user interface to the ARPANET standard File Transfer Protocol.
 The program allows a user to transfer files to and from a remote network
 site.

Package: libpipeline1
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 98
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: i386
Source: libpipeline
Version: 1.2.1-1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 38574
Description: pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/

Package: libsasl2-2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 228
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: i386
Source: cyrus-sasl2
Version: 2.1.25.dfsg1-6+deb7u1
Replaces: libsasl2
Depends: libc6 (>= 2.4), libdb5.1
Pre-Depends: multiarch-support
Recommends: libsasl2-modules (= 2.1.25.dfsg1-6+deb7u1)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Size: 120076
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. If you intend to
 use this package on a server that provides SASL authentication, then
 you must install some of the libsasl2-modules* packages.
Homepage: http://www.cyrusimap.org/

Package: passwd
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 2196
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: i386
Source: shadow
Version: 1:4.1.5.1-1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Size: 1235444
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: bsdmainutils
Priority: important
Section: utils
Installed-Size: 529
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: i386
Version: 9.0.3
Depends: libc6 (>= 2.4), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Size: 205452
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
 from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
 write (as bsd-write).
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: hostname
Essential: yes
Priority: required
Section: admin
Installed-Size: 71
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: i386
Version: 3.11
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Size: 14726
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: bsd-mailx
Priority: standard
Section: mail
Installed-Size: 130
Maintainer: Robert Luberda <robert@debian.org>
Architecture: i386
Version: 8.1.2-0.20111106cvs-1+deb7u1
Replaces: mailx (<< 1:20071201)
Provides: mail-reader, mailx
Depends: base-files (>= 2.2.0), default-mta | mail-transport-agent, libbsd0 (>= 0.2.0), libc6 (>= 2.4), liblockfile1 (>= 1.0)
Breaks: mailutils (<< 1:1.1+dfsg1-4), mailx (<< 1:20071201)
Size: 83548
Description: simple mail user agent
 mailx is the traditional command-line-mode mail user agent.
 Even if you don't use it, it may be required by other programs.

Package: xinetd
Priority: extra
Section: net
Installed-Size: 246
Maintainer: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Architecture: i386
Version: 1:2.3.14-7.1+deb7u1
Provides: inet-superserver
Depends: libc6 (>= 2.7), libwrap0 (>= 7.6-4~), netbase, update-inetd
Recommends: sysklogd | system-log-daemon, logrotate
Conflicts: inet-superserver
Size: 145722
Description: replacement for inetd with many enhancements
 xinetd has access control mechanisms, extensive logging capabilities,
 the ability to make services available based on time, and can place
 limits on the number of servers that can be started, among other things.
 .
 It has the ability to redirect TCP streams to a remote host and port.
 This is useful for those of that use IP masquerading, or NAT, and want
 to be able to reach your internal hosts.
 .
 It also has the ability to bind specific services to specific interfaces.
 This is useful when you want to make services available for your internal
 network, but not the rest of the world. Or to have a different service
 running on the same port, but different interfaces.
Homepage: http://www.xinetd.org

Package: libacl1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: acl
Version: 2.2.51-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Size: 30486
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: screen
Priority: optional
Section: misc
Installed-Size: 941
Maintainer: Axel Beckert <abe@debian.org>
Architecture: i386
Version: 4.1.0~20120320gitdb59704-7
Depends: libc6 (>= 2.11), libpam0g (>= 0.99.7.1), libtinfo5, dpkg (>= 1.15.4) | install-info
Suggests: iselect (>= 1.4.0-1) | screenie | byobu
Size: 653840
Description: terminal multiplexer with VT100/ANSI terminal emulation
 GNU Screen is a terminal multiplexer that runs several separate "screens" on
 a single physical character-based terminal. Each virtual terminal emulates a
 DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
 can be detached and resumed later on a different terminal.
 .
 Screen also supports a whole slew of other features, including configurable
 input and output translation, serial port support, configurable logging,
 and multi-user support.
Homepage: http://savannah.gnu.org/projects/screen

Package: libpam-runtime
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 1116
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Source: pam
Version: 1.1.3-7.1
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 1.5.19), libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Size: 227884
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: libslang2
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 1261
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: i386
Source: slang2
Version: 2.2.4-15
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Size: 534542
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Homepage: http://www.jedsoft.org/slang/

Package: apache2
Priority: optional
Section: httpd
Installed-Size: 1
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Version: 2.2.22-13+deb7u4
Depends: apache2-mpm-worker (= 2.2.22-13+deb7u4) | apache2-mpm-prefork (= 2.2.22-13+deb7u4) | apache2-mpm-event (= 2.2.22-13+deb7u4) | apache2-mpm-itk (= 2.2.22-13+deb7u4), apache2.2-common (= 2.2.22-13+deb7u4)
Size: 1438
Description: Apache HTTP Server metapackage
 The Apache Software Foundation's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 It features support for HTTPS, virtual hosting, CGI, SSI, IPv6, easy
 scripting and database integration, request/response filtering, many
 flexible authentication schemes, and more.
Homepage: http://httpd.apache.org/

Package: initscripts
Priority: required
Section: admin
Installed-Size: 288
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.86.ds1-64), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), ifupdown (<< 0.7~rc3), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Size: 92008
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libblkid1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 241
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: util-linux
Version: 2.20.1-5.3
Depends: libc6 (>= 2.7), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Size: 127524
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: pwgen
Priority: optional
Section: admin
Installed-Size: 66
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: i386
Source: pwgen (2.06-1)
Version: 2.06-1+b2
Depends: libc6 (>= 2.3)
Size: 18042
Description: Automatic Password generation
 pwgen generates random, meaningless but pronounceable passwords.
 These passwords contain either only lowercase letters, or upper
 and lower case mixed, or digits thrown in.
 Uppercase letters and digits are placed in a way that eases
 remembering their position when memorizing only the word.

Package: libsemanage-common
Multi-Arch: foreign
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Source: libsemanage
Version: 2.1.6-6
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Size: 23220
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libpam-modules-bin
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 214
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Source: pam
Version: 1.1.3-7.1
Replaces: libpam-modules (<< 1.1.3-2)
Depends: libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Size: 113036
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: libavahi-common-data
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 793
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: avahi
Version: 0.6.31-2
Size: 131970
Description: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.
Homepage: http://avahi.org/

Package: apache2-utils
Priority: optional
Section: httpd
Installed-Size: 287
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apache2
Version: 2.2.22-13+deb7u4
Replaces: apache-utils (<< 1.3.33-4), apache2-common, apache2.2-bin (<< 2.2.22-1~)
Depends: libapr1 (>= 1.2.7), libaprutil1 (>= 1.2.7+dfsg), libc6 (>= 2.4), libssl1.0.0 (>= 1.0.0)
Conflicts: apache-common (<< 1.3.28.0.1-1)
Size: 163270
Description: utility programs for webservers
 Provides some add-on programs useful for any webserver.  These include:
  - ab (Apache benchmark tool)
  - logresolve (Resolve IP addresses to hostname in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - dbmmanage (Manipulate basic authentication files in DBM format, using perl)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: http://httpd.apache.org/

Package: findutils
Essential: yes
Priority: required
Section: utils
Installed-Size: 1615
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: i386
Version: 4.4.2-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7)
Suggests: mlocate | locate
Size: 623458
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libbsd0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Debian GNU/kFreeBSD <debian-bsd@lists.debian.org>
Architecture: i386
Source: libbsd
Version: 0.4.2-1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 60280
Description: utility functions from BSD systems - shared library
 This library provides some functions commonly available on BSD systems
 but not on others like GNU systems.
Homepage: http://libbsd.freedesktop.org/

Package: xz-utils
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 474
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: i386
Version: 5.1.1alpha+20120614-2
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.7), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Size: 238414
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: libsensors4
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: i386
Source: lm-sensors
Version: 1:3.3.2-2+deb7u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Suggests: lm-sensors
Size: 53860
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a shared library for querying lm-sensors.
Homepage: http://www.lm-sensors.org

Package: ncurses-term
Multi-Arch: foreign
Priority: standard
Section: misc
Installed-Size: 2117
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Source: ncurses
Version: 5.9-10
Replaces: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), ncurses-base (<< 5.7+20100313-1)
Breaks: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1)
Size: 602408
Description: additional terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains all of the numerous terminal definitions not found in
 the ncurses-base package.
Homepage: http://invisible-island.net/ncurses/

Package: libpaper1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: i386
Source: libpaper
Version: 1.1.24+nmu2
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.3), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28)
Pre-Depends: multiarch-support
Recommends: libpaper-utils
Size: 21944
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.

Package: openssh-server
Multi-Arch: foreign
Priority: optional
Section: net
Installed-Size: 809
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Source: openssh
Version: 1:6.0p1-4+deb7u2
Replaces: openssh-client (<< 1:3.8.1p1-11), ssh, ssh-krb5
Provides: ssh-server
Depends: libc6 (>= 2.8), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.10+dfsg~), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, openssh-client (= 1:6.0p1-4+deb7u2), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), lsb-base (>= 3.2-13), procps
Recommends: xauth, ncurses-term, openssh-blacklist, openssh-blacklist-extra
Suggests: ssh-askpass, rssh, molly-guard, ufw, monkeysphere
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7), ssh-nonfree (<< 2), ssh-socks, ssh2
Size: 342564
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.org/

Package: liblzma5
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 320
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: i386
Source: xz-utils
Version: 5.1.1alpha+20120614-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 207588
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: ttf-dejavu-extra
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 6437
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Source: ttf-dejavu
Version: 2.33-3
Replaces: ttf-dejavu (<< 2.20-1)
Depends: ttf-dejavu-core
Pre-Depends: dpkg (>= 1.15.6~)
Conflicts: ttf-dejavu (<< 2.20-1)
Size: 1759152
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package includes additional variants, such as oblique, italic,
 bold-oblique, bold-italic and the condensed forms.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: http://dejavu-fonts.org/

Package: libnih1
Priority: optional
Section: libs
Installed-Size: 210
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: i386
Source: libnih
Version: 1.0.3-4.1
Depends: libc6 (>> 2.13), libc6 (<< 2.14)
Size: 131762
Description: NIH Utility Library
 libnih is a light-weight "standard library" of C functions to ease the
 development of other libraries and applications, especially those
 normally found in /lib.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libcroco3
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 342
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: libcroco
Version: 0.6.6-2
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.16.0), libxml2 (>= 2.7.4)
Pre-Depends: multiarch-support
Size: 133108
Description: Cascading Style Sheet (CSS) parsing and manipulation toolkit
 Services provided by Libcroco
  * A parser module that provides
    o A SAC like API. SAC stands for Simple API for CSS. SAC is an event driven
      API which resembles SAX in the xml world.
    o A CSSOM like API. CSSOM stands for Cascading Style Sheet Object Model.
 .
    The libcroco parser implements the CSS Level 2 specification, the CSS
    forward compatibility rules and the CSS cascading rules.
 .
  * A CSS2 selection engine
    Given an xml element node (that obviously comes from an xml document) and
    a stylesheet cascade, the Libcroco selection engine can evaluate the css
    selectors of the cascade and return the style properties associated to
    the xml element node.
 .
    Note that the xml manipulation toolkit used by the libcroco selection
    engine at the moment is libxml2.
 .
 This package contains the shared libraries.

Package: libavahi-common3
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: avahi
Version: 0.6.31-2
Depends: libc6 (>= 2.4), libavahi-common-data
Pre-Depends: multiarch-support
Size: 55132
Description: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.
Homepage: http://avahi.org/

Package: ldap-utils
Priority: optional
Section: net
Installed-Size: 627
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: i386
Source: openldap
Version: 2.4.31-2
Replaces: openldap-utils, openldapd, slapd (<< 2.2.23-0.pre6)
Provides: ldap-client, openldap-utils
Depends: libc6 (>= 2.4), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.17-0), libldap-2.4-2 (= 2.4.31-2), libsasl2-2 (>= 2.1.24)
Recommends: libsasl2-modules
Conflicts: ldap-client, openldap-utils, umich-ldap-utils
Size: 331910
Description: OpenLDAP utilities
 This package provides utilities from the OpenLDAP (Lightweight
 Directory Access Protocol) package. These utilities can access a
 local or remote LDAP server and contain all the client programs
 required to access LDAP servers.
Homepage: http://www.openldap.org/

Package: libgnutls26
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1399
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Source: gnutls26
Version: 2.12.20-8+deb7u3
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.8), libgcrypt11 (>= 1.4.5), libp11-kit0 (>= 0.11), libtasn1-3 (>= 1.6-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Breaks: ccbuild (<= 2.0.1-1), csync2 (<= 1.34-2.2), freewheeling (<= 0.6-1.1), gkrellm (<= 2.3.4-1), libsoup2.4-1 (= 2.31.2-1), libsoup2.4-1 (<= 2.30.1-1), macopix-gtk2 (<= 1.7.4-3), pokerth (<= 0.8.3-3+b1), pokerth-server (<= 0.8.3-3+b1), sipsak (<= 0.9.6-2.1), slrn (<= 1.0.0~pre18-1.1), slrnpull (<= 1.0.0~pre18-1.1), snowdrop (<= 0.02b-9), ssmtp (<= 2.64-4), tf5 (<= 5.0beta8-4), wput (<= 0.6.2-2), zoneminder (<= 1.24.4-1)
Conflicts: gnutls0, gnutls0.4
Size: 610392
Description: GNU TLS library - runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the runtime libraries.
Homepage: http://www.gnutls.org/

Package: libgpm2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 77
Maintainer: Peter Samuelson <peter@p12n.org>
Architecture: i386
Source: gpm
Version: 1.20.4-6
Depends: libc6 (>= 2.7)
Pre-Depends: multiarch-support
Suggests: gpm
Size: 35890
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Homepage: http://www.nico.schottelius.org/software/gpm/

Package: libdb5.1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 1655
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: i386
Source: db
Version: 5.1.29-5
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 756538
Description: Berkeley v5.1 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.1 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: debian-archive-keyring
Multi-Arch: foreign
Priority: important
Section: misc
Installed-Size: 108
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Version: 2014.3~deb7u1
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Size: 60746
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: sensible-mda
Priority: extra
Section: mail
Installed-Size: 272
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: i386
Source: sendmail
Version: 8.14.4-4
Depends: sendmail-bin | mail-transport-agent, procmail | maildrop | deliver, libc6 (>= 2.4)
Size: 218384
Description: Mail Delivery Agent wrapper
 Sensible-mda is a Debian addition in the sendmail package and has been
 split out in hopes that it might be useful for other MTA packages.
 .
 Sensible-mda is called by the MTA, and will in turn call whichever of
 the following MDAs that it finds (in this order):
 procmail, maildrop, deliver, mail.local
Homepage: http://www.sendmail.org

Package: insserv
Priority: optional
Section: misc
Installed-Size: 182
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: i386
Version: 1.14.0-5
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Size: 64696
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: syslinux
Priority: optional
Section: utils
Installed-Size: 169
Maintainer: Daniel Baumann <daniel.baumann@progress-technologies.net>
Architecture: i386
Version: 2:4.05+dfsg-6+deb7u1
Replaces: syslinux-common
Depends: libc6 (>= 2.7), libuuid1 (>= 2.16), syslinux-common (= 2:4.05+dfsg-6+deb7u1)
Recommends: mtools
Suggests: dosfstools, os-prober
Breaks: syslinux-common (<< 2:4.05+dfsg-6+deb7u1)
Size: 96076
Description: collection of boot loaders
 SYSLINUX is a collection of boot loaders which operates off Linux ext2/3/4 or
 btrfs filesystems, FAT and NTFS filesystems, network servers using PXE
 firmware, or from CD-ROMs.
Homepage: http://syslinux.zytor.com/

Package: gzip
Essential: yes
Priority: required
Section: utils
Installed-Size: 232
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: i386
Version: 1.5-1.1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.6)
Suggests: less
Size: 115372
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: dpkg
Essential: yes
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 6527
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Version: 1.16.16
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7), aptitude (<< 0.4.7-1), dpkg-dev (<< 1.15.8), libdpkg-perl (<< 1.15.8), pinfo (<< 0.6.9-3.1), tkinfo (<< 2.8-3.1)
Size: 2644944
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: http://wiki.debian.org/Teams/Dpkg

Package: tcsh
Priority: optional
Section: shells
Installed-Size: 1370
Maintainer: Thomas Lange <lange@debian.org>
Architecture: i386
Version: 6.18.01-2
Provides: c-shell
Depends: libc6 (>= 2.11), libtinfo5
Size: 567022
Description: TENEX C Shell, an enhanced version of Berkeley csh
 The TENEX C Shell is an enhanced version of the Berkeley Unix C shell.
 It includes all features of 4.4BSD C shell, plus a command-line editor,
 programmable word completion, spelling correction and more.
Homepage: http://www.tcsh.org/

Package: libpcre3
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 432
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: i386
Source: pcre3
Version: 1:8.30-5
Depends: libc6 (>= 2.3)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Size: 240236
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: libncursesw5
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 363
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Source: ncurses
Version: 5.9-10
Depends: libtinfo5 (= 5.9-10), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libgpm2
Size: 148684
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: liblocale-gettext-perl
Priority: required
Section: perl
Installed-Size: 87
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: liblocale-gettext-perl (1.05-7)
Version: 1.05-7+b1
Depends: libc6 (>= 2.2)
Pre-Depends: perl-base (>= 5.14.2-3), perlapi-5.14.2
Size: 20326
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: http://search.cpan.org/dist/gettext/gettext.pm

Package: openssh-blacklist
Priority: optional
Section: net
Installed-Size: 4064
Maintainer: Kees Cook <kees@outflux.net>
Architecture: all
Version: 0.4.1+nmu1
Pre-Depends: dpkg (>= 1.10.24)
Recommends: openssh-client
Size: 1834786
Description: list of default blacklisted OpenSSH RSA and DSA keys
 Contains the list of known-bad default OpenSSH keys, for ssh-vulnkeys to
 use when examining suspect keys: DSA-1024, RSA-2048

Package: psutils
Multi-Arch: foreign
Priority: optional
Section: text
Installed-Size: 228
Maintainer: Jay Berkenbilt <qjb@debian.org>
Architecture: i386
Version: 1.17.dfsg-1
Depends: libc6 (>= 2.7), libpaper1
Recommends: ghostscript
Size: 77588
Description: PostScript document handling utilities
 This collection of utilities is for manipulating PostScript
 documents.  Page selection and rearrangement are supported, including
 arrangement into signatures for booklet printing, and page merging
 for n-up printing.
 .
 The following programs are included in psutils: epsffit, extractres,
 fixdlsrps, fixfmps, fixmacps, fixpsditps, fixpspps, fixscribeps,
 fixtpps, fixwfwps, fixwpps, fixwwps, getafm, includeres, psbook,
 psmerge, psnup, psresize, psselect, pstops, showchar
 .
 Some programs included here (psmerge) behave differently if gs is
 available, but all programs work without it.
Homepage: http://www.tardis.ed.ac.uk/~ajcd/psutils/

Package: info
Multi-Arch: foreign
Priority: important
Section: doc
Installed-Size: 359
Maintainer: Debian TeX maintainers <debian-tex-maint@lists.debian.org>
Architecture: i386
Source: texinfo
Version: 4.13a.dfsg.1-10
Replaces: texinfo (<< 4.7-2)
Provides: info-browser
Depends: libc6 (>= 2.3.4), libncurses5 (>= 5.5-5~), libtinfo5, install-info
Suggests: texinfo-doc-nonfree
Size: 220412
Description: Standalone GNU Info documentation browser
 The Info file format is an easily-parsable representation for online
 documents. This program allows you to view Info documents, like the
 ones stored in /usr/share/info.
 .
 Much of the software in Debian comes with its online documentation in
 the form of Info files, so it is most likely you will want to install it.

Package: libfile-copy-recursive-perl
Priority: optional
Section: perl
Installed-Size: 88
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.38-1
Depends: perl (>= 5.6.0-16)
Size: 20554
Description: Perl extension for recursively copying files and directories
 File::Copy::Recursive module copies and moves directories recursively
 (or single files, well... singley) to an optional depth and attempts
 to preserve each file or directory's mode.
Homepage: http://search.cpan.org/dist/File-Copy-Recursive/

Package: dialog
Priority: optional
Section: misc
Installed-Size: 1176
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 1.1-20120215-2
Provides: libdialog-dev
Depends: libc6 (>= 2.7), libncursesw5 (>= 5.6+20070908), libtinfo5, debianutils (>= 1.6)
Size: 320450
Description: Displays user-friendly dialog boxes from shell scripts
 This application provides a method of displaying several different types
 of dialog boxes from shell scripts.  This allows a developer of a script
 to interact with the user in a much friendlier manner.
 .
 The following types of boxes are at your disposal:
  yes/no           Typical query style box with "Yes" and "No" answer buttons
  menu             A scrolling list of menu choices with single entry selection
  input            Query style box with text entry field
  message          Similar to the yes/no box, but with only an "Ok" button
  text             A scrollable text box that works like a simple file viewer
  info             A message display that allows asynchronous script execution
  checklist        Similar to the menu box, but allowing multiple selections
  radiolist        Checklist style box allowing single selections
  gauge            Typical "progress report" style box
  tail             Allows viewing the end of files (tail) that auto updates
  background tail  Similar to tail but runs in the background.
  editbox          Allows editing an existing file
Homepage: http://invisible-island.net/dialog/dialog.html

Package: iputils-ping
Priority: important
Section: net
Installed-Size: 148
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: i386
Source: iputils (3:20101006-1)
Version: 3:20101006-1+b1
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.3), libssl1.0.0 (>= 1.0.0)
Conflicts: ping, suidmanager (<< 0.50)
Size: 55206
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: ttf-dejavu-core
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 2804
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Source: ttf-dejavu
Version: 2.33-3
Replaces: ttf-dejavu (<< 2.20-1)
Pre-Depends: dpkg (>= 1.15.6~)
Conflicts: ttf-dejavu (<< 2.20-1)
Size: 1020882
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif, serif-bold,
 mono and mono-bold variants. For additional variants, see the
 ttf-dejavu-extra package.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: http://dejavu-fonts.org/

Package: iputils-tracepath
Priority: optional
Section: net
Installed-Size: 112
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: i386
Source: iputils (3:20101006-1)
Version: 3:20101006-1+b1
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.1)
Suggests: traceroute
Conflicts: suidmanager (<< 0.50)
Size: 31774
Description: Tools to trace the network path to a remote host
 The tracepath utility is similar to the traceroute utility, but also
 attempts to discover the MTU of the path.
 .
 This package also includes tracepath6 and traceroute6 utilities, which
 may be used on IPv6 networks.

Package: libbz2-1.0
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 112
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: bzip2
Version: 1.0.6-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 46314
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: bind9utils
Priority: optional
Section: net
Installed-Size: 293
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: bind9 (<= 1:9.5.0~b2-1)
Depends: libbind9-80, libc6 (>= 2.4), libcap2 (>= 2.10), libdns88, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc84, libisccc80, libisccfg82, libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27)
Size: 120936
Description: Utilities for BIND
 This package provides various utilities that are useful for maintaining a
 working BIND installation.

Package: perl
Priority: standard
Section: perl
Installed-Size: 10783
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: i386
Version: 5.14.2-21+deb7u2
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdevel-dprof-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libmodule-corelist-perl (<< 2.14-2), libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-base (<< 5.10.1-12), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1)
Provides: data-dumper, libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdevel-dprof-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl5
Depends: perl-base (= 5.14.2-21+deb7u2), perl-modules (>= 5.14.2-21+deb7u2), libbz2-1.0, libc6 (>= 2.11), libdb5.1, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.3.3)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.033), libcompress-raw-zlib-perl (<< 2.033), libcompress-zlib-perl (<< 2.033), libdevel-dprof-perl (<< 20110228.00), libdigest-md5-perl (<< 2.51), libdigest-sha-perl (<< 5.71-2+deb7u1), libencode-perl (<< 2.44-1+deb7u1), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.033), libio-compress-bzip2-perl (<< 2.033), libio-compress-perl (<< 2.033), libio-compress-zlib-perl (<< 2.033), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.13), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.27), libsys-syslog-perl (<< 0.27), libthreads-perl (<< 1.83), libthreads-shared-perl (<< 1.37), libtime-hires-perl (<< 1.9721.01), libtime-piece-perl (<< 1.20.01), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1), perl-doc (<< 5.14.2-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Size: 3690076
Description: Larry Wall's Practical Extraction and Report Language
 An interpreted scripting language, known among some as "Unix's Swiss
 Army Chainsaw".
 .
 Perl is optimised for scanning arbitrary text files and system
 administration.  It has built-in extended regular expression matching
 and replacement, a data-flow mechanism to improve security with
 setuid scripts and is extensible via modules that can interface to C
 libraries.
Homepage: http://dev.perl.org/perl5/

Package: libdrm-intel1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 604
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: libdrm
Version: 2.4.40-1~deb7u2
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.38), libpciaccess0
Pre-Depends: multiarch-support
Size: 497668
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the intel-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.

Package: libtinfo5
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 404
Maintainer: Craig Small <csmall@debian.org>
Architecture: i386
Source: ncurses
Version: 5.9-10
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 268788
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: procmail
Priority: standard
Section: mail
Installed-Size: 303
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 3.22-20+deb7u1
Depends: libc6 (>= 2.4)
Recommends: default-mta | mail-transport-agent | fetchmail
Conflicts: suidmanager (<< 0.50)
Size: 154144
Description: Versatile e-mail processor
 Can be used to create mail-servers, mailing lists, sort your incoming
 mail into separate folders/files (very convenient when subscribing to one
 or more mailing lists or for prioritising your mail), preprocess your
 mail, start any programs upon mail arrival (e.g. to generate different
 chimes on your workstation for different types of mail) or selectively
 forward certain incoming mail automatically to someone.
Homepage: http://www.procmail.org/

Package: apache2.2-common
Priority: optional
Section: httpd
Installed-Size: 619
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apache2
Version: 2.2.22-13+deb7u4
Replaces: apache2-common
Depends: apache2.2-bin (= 2.2.22-13+deb7u4), apache2-utils, mime-support, lsb-base, procps, perl
Recommends: ssl-cert
Suggests: www-browser, apache2-doc, apache2-suexec | apache2-suexec-custom
Conflicts: apache, apache2-common
Size: 292190
Description: Apache HTTP Server common files
 The Apache Software Foundation's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the configuration and support scripts.
 However, it does *not* include the server itself; for this you need to
 install one of the apache2-mpm-* packages, such as worker or prefork.
Homepage: http://httpd.apache.org/

Package: unzip
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 331
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 6.0-8+deb7u2
Replaces: unzip-crypt (<< 5.41)
Depends: libbz2-1.0, libc6 (>= 2.4)
Suggests: zip
Conflicts: unzip-crypt (<< 5.41)
Size: 186166
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: http://www.info-zip.org/UnZip.html

Package: libpciaccess0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: libpciaccess
Version: 0.13.1-2
Depends: libc6 (>= 2.7), zlib1g (>= 1:1.2.3.3)
Pre-Depends: multiarch-support
Suggests: pciutils
Size: 48106
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independant way.

Package: gcc-4.7-base
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 197
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.7
Version: 4.7.2-5
Breaks: dehydra (<= 0.9.hg20110609-2), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Size: 143294
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libavahi-client3
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: avahi
Version: 0.6.31-2
Depends: libavahi-common3 (>= 0.6.22), libc6 (>= 2.4), libdbus-1-3 (>= 1.1.1)
Pre-Depends: multiarch-support
Size: 58690
Description: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.
Homepage: http://avahi.org/

Package: libc-bin
Essential: yes
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 3010
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: eglibc
Version: 2.13-38+deb7u8
Replaces: libc0.1, libc0.3, libc6, libc6.1
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Size: 1218004
Description: Embedded GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * rpcinfo: report RPC information
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.eglibc.org

Package: dselect
Multi-Arch: foreign
Priority: optional
Section: admin
Installed-Size: 2477
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: i386
Source: dpkg
Version: 1.16.16
Replaces: dpkg-ftp, dpkg-multicd, manpages-it (<< 2.80-4)
Depends: libc6 (>= 2.11), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libstdc++6 (>= 4.1.1), libtinfo5, dpkg (>= 1.13.1)
Suggests: perl
Conflicts: dpkg-ftp, dpkg-multicd
Size: 1156378
Description: Debian package management front-end
 dselect is a high-level interface for managing the installation and
 removal of Debian software packages.
 .
 Many users find dselect intimidating and new users may prefer to use
 apt-based user interfaces.
Homepage: http://wiki.debian.org/Teams/Dpkg

Package: mime-support
Priority: standard
Section: net
Installed-Size: 132
Maintainer: Brian White <bcwhite@pobox.com>
Architecture: all
Version: 3.52-1+deb7u1
Recommends: file (>= 3.27-3)
Conflicts: a2ps (<< 4.10.4), metamail (<< 2.7-44)
Size: 35466
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.

Package: apache2.2-bin
Priority: optional
Section: httpd
Installed-Size: 3379
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apache2
Version: 2.2.22-13+deb7u4
Replaces: apache2.2-common (<< 2.2.14-2~)
Depends: libapr1 (>= 1.4.2), libaprutil1 (>= 1.4.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libc6 (>= 2.4), libcap2 (>= 2.10), libldap-2.4-2 (>= 2.4.7), libpcre3 (>= 8.10), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.1.4)
Conflicts: apache2.2-common (<< 2.2.11-5~)
Size: 775596
Description: Apache HTTP Server common binary files
 The Apache Software Foundation's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains all binaries but no configuration or support scripts.
 To get a stand-alone server, you need to install one of the apache2-mpm-*
 packages, such as worker or prefork. Other packages like gnome-user-share
 may bring their own Apache configuration, though.
Homepage: http://httpd.apache.org/

Package: cifs-utils
Priority: optional
Section: otherosfs
Installed-Size: 194
Maintainer: Debian Samba Maintainers <pkg-samba-maint@lists.alioth.debian.org>
Architecture: i386
Version: 2:5.5-1
Replaces: smbfs (<< 2:4.0~rc1-1)
Depends: samba-common, libc6 (>= 2.4), libkeyutils1, libkrb5-3 (>= 1.10+dfsg~), libtalloc2 (>= 2.0.4~git20101213), libwbclient0 (>= 2:3.2.0)
Recommends: keyutils, winbind
Suggests: smbclient
Size: 73380
Description: Common Internet File System utilities
 The SMB/CIFS protocol provides support for cross-platform file sharing with
 Microsoft Windows, OS X, and other Unix systems.
 .
 This package provides utilities for managing mounts of CIFS network
 file systems.
Homepage: http://www.samba.org/~jlayton/cifs-utils/

Package: libldap-2.4-2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 458
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: i386
Source: openldap
Version: 2.4.31-2
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.12), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.17-0), libsasl2-2 (>= 2.1.24)
Pre-Depends: multiarch-support
Conflicts: ldap-utils (<= 2.1.23-1)
Size: 240916
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: sysvinit-utils
Essential: yes
Priority: required
Section: admin
Installed-Size: 218
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: i386
Source: sysvinit
Version: 2.88dsf-41+deb7u1
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.10), libselinux1 (>= 1.32)
Suggests: bootlogd, sash
Breaks: upstart (<< 1.5-1)
Conflicts: chkconfig (<< 11.0-79.1-2), last, sysvconfig
Size: 98040
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: cron
Priority: important
Section: admin
Installed-Size: 298
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: i386
Version: 3.0pl1-124
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, checksecurity
Breaks: dpkg (<< 1.15.4)
Size: 106192
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/

Package: wide-dhcpv6-client
Priority: optional
Section: net
Installed-Size: 276
Maintainer: Jérémie Corbier <jcorbier@debian.org>
Architecture: i386
Source: wide-dhcpv6
Version: 20080615-11.1
Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, lsb-base, sharutils
Size: 103472
Description: DHCPv6 client for automatic IPv6 hosts configuration
 This is the DHCPv6 client from WIDE project. For more information visit the
 project web site at http://wide-dhcpv6.sourceforge.net/
 .
 DHCPv6 allows prefix delagation and host configuration for the IPv6 network
 protocol.
 .
 Multiple network interfaces are supported by this DHCPv6 package.
Homepage: http://wide-dhcpv6.sourceforge.net/

Package: multiarch-support
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 157
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: eglibc
Version: 2.13-38+deb7u8
Depends: libc6 (>= 2.13-5)
Size: 151366
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.eglibc.org

Package: fontconfig-config
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 299
Maintainer: Keith Packard <keithp@debian.org>
Architecture: all
Source: fontconfig
Version: 2.9.0-7.1
Replaces: fontconfig (<< 2.3.2-2)
Depends: debconf (>= 0.5) | debconf-2.0, ucf (>= 0.29), ttf-dejavu-core | ttf-bitstream-vera | ttf-freefont | gsfonts-x11
Conflicts: fontconfig (<< 2.3.2-2)
Size: 232610
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.

Package: libedit2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 169
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libedit
Version: 2.11-20080614-5
Depends: libbsd0 (>= 0.0), libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Size: 71500
Description: BSD editline and history libraries
 The editline library provides generic line editing and
 history functions.
 .
 It slightly resembles GNU readline
Homepage: http://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/lib/libedit/

Package: ttf-dejavu
Multi-Arch: foreign
Priority: optional
Section: fonts
Installed-Size: 56
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Version: 2.33-3
Depends: ttf-dejavu-core, ttf-dejavu-extra
Pre-Depends: dpkg (>= 1.15.6~)
Conflicts: ttf-dejavu (<< 2.20-1)
Size: 30650
Description: Metapackage to pull in ttf-dejavu-core and ttf-dejavu-extra
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 Use this package if you want all DejaVu variants.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: http://dejavu-fonts.org/

Package: unixodbc
Multi-Arch: foreign
Priority: optional
Section: database
Installed-Size: 122
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: i386
Version: 2.2.14p2-5
Depends: libc6 (>= 2.4), libreadline6 (>= 6.0), odbcinst1debian2 (>= 2.2.11-3), libodbc1 (>= 2.2.14p2-3)
Conflicts: unixodbc-bin (<< 2.2.4-1)
Size: 51994
Description: Basic ODBC tools
 UnixODBC is an implementation of the Open Database Connectivity standard,
 a database abstraction layer that allows applications to be used with
 many different relational databases by way of a single library.
 .
 This package contains isql, a command-line tool that allows SQL commands
 to be entered interactively.
Homepage: http://www.unixodbc.org/

Package: sendmail
Priority: extra
Section: mail
Installed-Size: 212
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: all
Version: 8.14.4-4
Replaces: sendmail-base (<< 8.14.4-2.2~), sendmail-tls
Depends: sendmail-base, sendmail-bin, sendmail-cf, sensible-mda
Suggests: sendmail-doc, rmail
Breaks: sendmail-base (<< 8.14.4-2.2~)
Size: 215282
Description: powerful, efficient, and scalable Mail Transport Agent
 Sendmail is an alternative Mail Transport Agent (MTA) for Debian.
 It is suitable for handling sophisticated mail configurations,
 although this means that its configuration can also be complex.
 .
 Fortunately, simple thing can be done easily, and complex things
 are possible, even if not easily understood ;)  Sendmail is the *ONLY*
 MTA with a Turing complete language to control *ALL* aspects of delivery!
 .
 Sendmail provides Security and SPAM/UCE/UBE protection via several means.
 .
 Sendmail includes *no* Mail User Agents (MUA), you'll have to
 pick from the plethora of available MUAs (mutt, vm, etc.)
 .
 This package supports REGEX, DB, NIS, NIS+, LDAP, DNS maps,
 and has enabled TCPWrappers, IPv6, LockFile, SMTP AUTH(SASL), STARTTLS(SSL).
 .
 This package is to make installation/upgrading easier (Do NOT delete it)
Homepage: http://www.sendmail.org

Package: libisccc80
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libisc84, libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Size: 36086
Description: Command Channel Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libisccc shared library used by BIND's daemons
 and clients, particularly rndc.

Package: libjson0
Multi-Arch: same
Priority: extra
Section: libs
Installed-Size: 77
Maintainer: fabien boucher <fabien.dot.boucher@gmail.com>
Architecture: i386
Source: json-c
Version: 0.10-1.2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 24652
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: http://oss.metaparadigm.com/json-c/

Package: libp11-kit0
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 130
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: i386
Source: p11-kit
Version: 0.12-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Size: 51818
Description: Library for loading and coordinating access to PKCS#11 modules - runtime
 Provides a way to load and enumerate PKCS#11 modules. Provides a standard
 configuration setup for installing PKCS#11 modules in such a way that
 they're discoverable.
 .
 Also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libnih-dbus1
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Scott James Remnant <scott@netsplit.com>
Architecture: i386
Source: libnih
Version: 1.0.3-4.1
Depends: libnih1 (= 1.0.3-4.1), libc6 (>= 2.2), libdbus-1-3 (>= 1.2.16)
Size: 97914
Description: NIH D-Bus Bindings Library
 libnih-dbus is a D-Bus bindings library that integrates with the main
 loop provided by libnih.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih

Package: libselinux1
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 204
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: i386
Source: libselinux
Version: 2.1.9-5
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Size: 89878
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.

Package: lynx-cur
Priority: extra
Section: web
Installed-Size: 4862
Maintainer: Atsuhito KOHDA <kohda@debian.org>
Architecture: i386
Version: 2.8.8dev.12-2
Provides: news-reader, www-browser
Depends: libbsd0 (>= 0.0), libbz2-1.0, libc6 (>= 2.8), libgcrypt11 (>= 1.4.5), libgnutls26 (>= 2.12.17-0), libidn11 (>= 1.13), libncursesw5 (>= 5.6+20070908), libtinfo5, zlib1g (>= 1:1.2.3.3)
Recommends: mime-support
Conflicts: lynx (<< 2.8.7dev9-1.1), lynx-cur-wrapper (<< 2.8.8dev.8-2), lynx-ssl
Size: 2213564
Description: Text-mode WWW Browser with NLS support (development version)
 Lynx is a fully-featured World Wide Web (WWW) client for users running
 cursor-addressable, character-cell display devices.
 It is very fast and easy to use. It will display HTML documents
 containing links to files residing on the local system,
 as well as files residing on remote systems running Gopher, HTTP, FTP,
 WAIS, and NNTP servers.
 .
 This package contains a development version of lynx.
Homepage: http://lynx.isc.org/

Package: openssh-client
Multi-Arch: foreign
Priority: standard
Section: net
Installed-Size: 2339
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: i386
Source: openssh
Version: 1:6.0p1-4+deb7u2
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.11), libedit2 (>= 2.11-20080614-1), libgssapi-krb5-2 (>= 1.10+dfsg~), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), zlib1g (>= 1:1.1.4), debconf (>= 1.2.0) | debconf-2.0, adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth, openssh-blacklist, openssh-blacklist-extra
Suggests: ssh-askpass, libpam-ssh, keychain, monkeysphere
Conflicts: rsh-client (<< 0.16.1-1), sftp, ssh (<< 1:3.8.1p1-9), ssh-krb5 (<< 1:4.3p2-7)
Size: 1045318
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.org/

Package: vim-runtime
Priority: optional
Section: editors
Installed-Size: 22368
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: all
Source: vim
Version: 2:7.3.547-7
Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:7.3.547-7)
Enhances: vim-tiny
Size: 4606980
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: http://www.vim.org/

Package: libtalloc2
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Jelmer Vernooij <jelmer@debian.org>
Architecture: i386
Source: talloc
Version: 2.0.7+git20120207-1
Depends: libc6 (>= 2.1.3)
Pre-Depends: multiarch-support
Size: 23970
Description: hierarchical pool based memory allocator
 A hierarchical pool based memory allocator with destructors. It uses
 reference counting to determine when memory should be freed.
Homepage: http://talloc.samba.org/

Package: libc6
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 8501
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: i386
Source: eglibc
Version: 2.13-38+deb7u8
Replaces: libc6-i386
Provides: glibc-2.13-1
Depends: libc-bin (= 2.13-38+deb7u8), libgcc1
Recommends: libc6-i686
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: locales (<< 2.13), locales-all (<< 2.13), nscd (<< 2.13)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Size: 3823588
Description: Embedded GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.eglibc.org

Package: libpng12-0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libpng
Version: 1.2.49-1
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Size: 192494
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: apt-utils
Priority: important
Section: admin
Installed-Size: 1284
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: i386
Source: apt
Version: 0.9.7.9+deb7u7
Depends: libapt-inst1.5 (>= 0.8.0), libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libdb5.1, libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0)
Suggests: xz-utils
Size: 376380
Description: package managment related utility programs
 This package contains some less used commandline utilities related
 to package managment with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: udev
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 949
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Version: 175-7.2
Replaces: libudev0
Depends: libc6 (>= 2.10), libselinux1 (>= 1.32), libudev0 (= 175-7.2), lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Recommends: usbutils, pciutils
Breaks: consolekit (<< 0.4.1), dmsetup (<< 2.02.84-1), libsane (<< 1.0.21-3), linux-image-2.6-486 (<< 2.6.32), linux-image-2.6-686 (<< 2.6.32), linux-image-2.6-686-bigmem (<< 2.6.32), linux-image-2.6-amd64 (<< 2.6.32), linux-image-2.6-k7 (<< 2.6.32), linux-image-2.6-openvz-686 (<< 2.6.32), linux-image-2.6-vserver-686 (<< 2.6.32), linux-image-2.6-vserver-686-bigmem (<< 2.6.32), linux-image-2.6-xen-686 (<< 2.6.32), mdadm (<< 3.0-3), multipath-tools (<< 0.4.8-12), systemd (<< 28)
Conflicts: libc6 (<< 2.9-22)
Size: 377550
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.

Package: libdns88
Priority: standard
Section: libs
Installed-Size: 1793
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Source: bind9
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libgeoip1 (>= 1.4.8+dfsg), libgssapi-krb5-2 (>= 1.10+dfsg~), libisc84, libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Size: 749874
Description: DNS Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package delivers the libdns shared library used by BIND's daemons and
 clients.

Package: iptables
Priority: important
Section: net
Installed-Size: 1201
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: i386
Version: 1.4.14-3.1
Provides: libxtables7
Depends: libc6 (>= 2.7), libnfnetlink0 (>= 1.0.0)
Breaks: iproute (<< 20120521-3), xtables-addons-common (<< 1.42-2)
Size: 387158
Description: administration tools for packet filtering and NAT
 These are the user-space administration tools for the Linux
 kernel's netfilter and iptables. netfilter and iptables provide
 a framework for stateful and stateless packet filtering, network
 and port address translation, and other IP packet manipulation.
 The framework is the successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
Homepage: http://www.netfilter.org/

Package: bash
Essential: yes
Multi-Arch: foreign
Priority: required
Section: shells
Installed-Size: 3902
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Version: 4.2+dfsg-0.1+deb7u3
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.11), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Size: 1472464
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: make
Priority: standard
Section: devel
Installed-Size: 1139
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: i386
Source: make-dfsg
Version: 3.81-8.2
Depends: libc6 (>= 2.3)
Suggests: make-doc
Size: 397634
Description: An utility for Directing compilation.
 GNU Make is an utility which controls the generation of executables and
 other target files of a program from the program's source files. It
 determines automatically which pieces of a large program need to be
 (re)created, and issues the commands to (re)create them. Make is not
 limited to programs and executable, it can be applied to any task
 where a set of target files must be created based on a set of input
 files, based on dependency and processing rules. Indeed, Make is a
 general purpose dependency solver.
Homepage: http://www.gnu.org/software/make/

Package: util-linux
Essential: yes
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 1526
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Version: 2.20.1-5.3
Replaces: e2fsprogs, fdisk, fstrim, linux32, miscutils, schedutils, setterm, sparc-utils
Provides: linux32, schedutils
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2), initscripts, dpkg (>= 1.15.4) | install-info, debconf (>= 0.5) | debconf-2.0
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.11), libncurses5 (>= 5.5-5~), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: console-tools (<< 1:0.2.3-21), fdisk, fstrim, kbd (<< 1.05-3), linux32, schedutils, setterm
Size: 659268
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Homepage: http://userweb.kernel.org/~kzak/util-linux/

Package: bind9
Priority: optional
Section: net
Installed-Size: 936
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: i386
Version: 1:9.8.4.dfsg.P1-6+nmu2+deb7u4
Replaces: apparmor-profiles (<< 2.1+1075-0ubuntu4), bind, dnsutils (<< 1:9.1.0-3)
Depends: libbind9-80 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libc6 (>= 2.4), libcap2 (>= 2.10), libdns88 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc84 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libisccc80 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libisccfg82 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), liblwres80 (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, netbase, adduser, lsb-base (>= 3.2-14), bind9utils (= 1:9.8.4.dfsg.P1-6+nmu2+deb7u4), net-tools
Suggests: dnsutils, bind9-doc, resolvconf, ufw
Conflicts: apparmor-profiles (<< 2.1+1075-0ubuntu4), bind
Size: 370186
Description: Internet Domain Name Server
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 This package provides the server and related configuration files.

Package: m4
Multi-Arch: foreign
Priority: standard
Section: interpreters
Installed-Size: 373
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: i386
Version: 1.4.16-3
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Size: 255596
Description: a macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.
Homepage: http://www.gnu.org/software/m4/

Package: rsyslog
Priority: important
Section: admin
Installed-Size: 1148
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: i386
Version: 5.8.11-3+deb7u2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.9), zlib1g (>= 1:1.1.4), lsb-base (>= 3.2-14), initscripts (>= 2.88dsf-13.3)
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp
Conflicts: linux-kernel-log-daemon, system-log-daemon
Size: 543482
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/

Package: cpio
Priority: important
Section: utils
Installed-Size: 845
Maintainer: Ruben Molina <rmolina@udea.edu.co>
Architecture: i386
Version: 2.11+dfsg-0.1+deb7u1
Replaces: cpio-mt
Depends: libc6 (>= 2.6), dpkg (>= 1.15.4) | install-info
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Size: 267080
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libstdc++6
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 1168
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.7
Version: 4.7.2-5
Depends: gcc-4.7-base (= 4.7.2-5), libc6 (>= 2.11), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Size: 346330
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: iputils-arping
Priority: extra
Section: net
Installed-Size: 76
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: i386
Source: iputils (3:20101006-1)
Version: 3:20101006-1+b1
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.0), libsysfs2
Conflicts: arping, iputils-ping (<< 20001110-6), suidmanager (<< 0.50)
Size: 23910
Description: Tool to send ICMP echo requests to an ARP address
 The arping command acts like the standard ping command except it pings
 a machine by its ARP address instead of its IP address.  It is typically
 used to locate a machine if its hardware address is known but its IP
 address is unknown

Package: isc-dhcp-client
Priority: important
Section: net
Installed-Size: 1884
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: i386
Source: isc-dhcp
Version: 4.2.2.dfsg.1-5+deb70u6
Replaces: dhcp3-client
Provides: dhcp-client, dhcp3-client
Depends: libc6 (>= 2.4), debianutils (>= 2.8.2), isc-dhcp-common (= 4.2.2.dfsg.1-5+deb70u6), iproute
Suggests: resolvconf, avahi-autoipd
Conflicts: dhcp-client (<< 3.0), ifupdown (<< 0.6.8+nmu3), resolvconf (<= 1.45), samba-common (<< 3.0.0beta1-2)
Size: 791094
Description: ISC DHCP client
 This is the client from the Internet Software Consortium's implementation of
 DHCP. For more information visit http://www.isc.org.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.

Package: ca-certificates
Multi-Arch: foreign
Priority: optional
Section: misc
Installed-Size: 432
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Version: 20130119+deb7u1
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Size: 209900
Description: Common CA certificates
 This package includes PEM files of CA certificates to allow SSL-based
 applications to check for the authenticity of SSL connections.
 .
 It includes, among others, certificate authorities used by the Debian
 infrastructure and those shipped with Mozilla's browsers.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: binutils
Priority: optional
Section: devel
Installed-Size: 12984
Maintainer: Matthias Klose <doko@debian.org>
Architecture: i386
Version: 2.22-8+deb7u2
Replaces: binutils-gold (<< 2.20.51.20100415)
Provides: elf-binutils
Depends: libc6 (>= 2.11), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6), zlib1g (>= 1:1.2.0)
Suggests: binutils-doc (>= 2.22-8+deb7u2)
Conflicts: binutils-gold (<< 2.20.51.20100415), elf-binutils, gas, modutils (<< 2.4.19-1)
Size: 4555422
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.

Package: sendmail-doc
Priority: extra
Section: doc
Installed-Size: 950
Maintainer: Jakub Safarik <jsafarik@ymail.com>
Architecture: all
Source: sendmail
Version: 8.14.4-4
Size: 836486
Description: powerful, efficient, and scalable Mail Transport Agent
 Sendmail is an alternative Mail Transport Agent (MTA) for
 Debian. It is suitable for handling sophisticated mail
 configurations, although this means that its configuration
 can also be complex.
 .
 Don't try anything fancy in sendmail without using this for guidance.
 .
 Because of the complexity, you may find yourself wanting to peruse
 the documentation files included herein.  The main files are:
   cf.README.gz    -- A reference for all things in sendmail.{mc,cf}
   op.{ps,txt}.gz  -- The care and feeding of Sendmail.
   faq.txt.gz      -- Sendmail FAQ, current as of the package date.
 .
 Other files include the references for smrsh and libmilter.
Homepage: http://www.sendmail.org

Package: less
Priority: standard
Section: text
Installed-Size: 276
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 444-4
Depends: libc6 (>= 2.11), libtinfo5, debianutils (>= 1.8)
Size: 134462
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: libglib2.0-0
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 3983
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: i386
Source: glib2.0
Version: 2.33.12+really2.32.4-5
Replaces: libglib2.0-dev (<< 2.23.2-2)
Depends: libc6 (>= 2.9), libffi5 (>= 3.0.4), libpcre3 (>= 8.10), libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Pre-Depends: multiarch-support
Recommends: libglib2.0-data, shared-mime-info
Breaks: gvfs (<< 1.8)
Size: 1829432
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/

Package: libgomp1
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: i386
Source: gcc-4.7
Version: 4.7.2-5
Depends: gcc-4.7-base (= 4.7.2-5), libc6 (>= 2.6)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Size: 29118
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/

Package: libtext-charwidth-perl
Priority: required
Section: perl
Installed-Size: 72
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b1
Depends: libc6 (>= 2.1.3), perl-base (>= 5.14.2-3), perlapi-5.14.2
Size: 11086
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: readline-common
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 80
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: readline6
Version: 6.2+dfsg-0.1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Size: 31864
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libcap2
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 53
Maintainer: Torsten Werner <twerner@debian.org>
Architecture: i386
Version: 1:2.22-1.2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.3)
Pre-Depends: multiarch-support
Size: 13986
Description: support for getting/setting POSIX.1e capabilities
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels. These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
Homepage: http://sites.google.com/site/fullycapable/

Package: libapr1
Priority: optional
Section: libs
Installed-Size: 262
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: i386
Source: apr
Version: 1.4.6-3+deb7u1
Depends: libc6 (>= 2.10), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Size: 111880
Description: Apache Portable Runtime Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
Homepage: http://apr.apache.org/

Package: libnfnetlink0
Priority: extra
Section: libs
Installed-Size: 56
Maintainer: netfilter maintainers <netfilter-maintainers@ned.snow-crash.org>
Architecture: i386
Source: libnfnetlink
Version: 1.0.0-1.1
Depends: libc6 (>= 2.0)
Size: 14904
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.

Package: libwrap0
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 120
Maintainer: Marco d'Itri <md@linux.it>
Architecture: i386
Source: tcp-wrappers
Version: 7.6.q-24
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.11)
Pre-Depends: multiarch-support
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Size: 62246
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libkrb5-3
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 921
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: i386
Source: krb5
Version: 1.10.1+dfsg-5+deb7u3
Depends: libc6 (>= 2.9), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1, libkrb5support0 (= 1.10.1+dfsg-5+deb7u3)
Pre-Depends: multiarch-support
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Conflicts: libkrb53
Size: 402148
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: lsof
Priority: standard
Section: utils
Installed-Size: 454
Maintainer: Norbert Tretkowski <nobse@debian.org>
Architecture: i386
Version: 4.86+dfsg-1
Depends: libc6 (>= 2.11), libperl4-corelibs-perl | perl (<< 5.12.3-7)
Size: 312394
Description: Utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: http://people.freebsd.org/~abe/

Package: liblockfile1
Multi-Arch: same
Priority: standard
Section: libs
Installed-Size: 56
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: i386
Source: liblockfile
Version: 1.09-5
Depends: libc6 (>= 2.4), liblockfile-bin (>= 1.09-5)
Pre-Depends: multiarch-support
Size: 15512
Description: NFS-safe locking library
 Liblockfile is a shared library with NFS-safe locking functions.

